71 Longhorn BBC, AC, PS, PB parting out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70LonghornCST · 05-05-2009, 12:17 AM

Just so I don't get lost, I am still interested in the lower molding that is close to cab on the passenger side. How much shipped to 95357?

s_nova69 · 05-05-2009, 01:14 AM

your not lost here is the picts from today.

70LonghornCST · 05-05-2009, 02:01 AM

Quote:

Originally Posted by s_nova69

your not lost here is the picts from today.

Thank you, Phil.
I think I will go ahead and take it until I can find an NOS one...which may be a long time from now.

How much shipped to 95357?

ajcan · 05-05-2009, 04:02 PM

Phil

I will take the hub caps if you will send me a PM I will send funds however you require.Too bad you weren't closer or I would take the wheels too.Shipping would be too much I'm sure.

AJ

**Dieselwrencher** · 05-05-2009, 09:13 PM

I would like the lower box mouldings pending price. And a price on shipping to 50169 as well. I'm also in need of a RH upper box moulding as well if you have any extra longhorn stuff. I would love that box side but you are pretty far away. Thanks Ryan.

On edit: Since you have sold the RH front one, do you have any others? I'm still interested in any longhorn box trim you may have. Thanks Ryan.

brianthelion02 · 05-05-2009, 09:14 PM

Im interested in the motor mounts and stands,if they are still available??

coolsun67 · 05-05-2009, 11:13 PM

How much to ship the a/c evap box to 84056?

thanks

s_nova69 · 05-06-2009, 12:15 AM

ajcan - pm sent with money transfer info hub caps + shipping

Dieselwrencher - pm me about mouldings. All? It will be a couple weeks till I can get to the other upr spears off the other green side but they have holes from someone putting screws through them to hold them on. Look at more picts posted tonight.

Brianthelion02 - Motor mounts and stands yours. Pm me your shipping info. I will have them boxed tomorrow and ready awaiting payment.

coolsun67 - The truck is in Layton. Pm sent to ya.

Thanks all

s_nova69 · 05-06-2009, 12:51 AM

ok well lets list stuff sold so far

AC brkts - pending payment
pwr steering brkts, pump, reservoir, and lines - pending payment
fan shroud - pending payment
pulleys
400 kick down switch
Emblems and seat belts - pending payment
hub caps - pending payment
engine stands and mounts - pending payment
AC underdash - pending payment
ac Evap box - pending
lower box moulding frt pass side - pending payment
Zbar and pivot ball - pending payment

Things still available

AT cross member $50
drive lines $40
Column (AT non tilt missing shift lever) $50
Windsheild (for those locals) $35
BBC air cleaner and spacer $30
booster and prop $30
rolling chassis (possible rear locker) Come and get it
alt brkts $100
AC control $25
frnt blinker assemblies $30 for both good shape
BBc 402 engine $400 runs great no smoke come and get it
Edelbrock 1406 carb runs good elec choke $100
drivers inner fender $30
factory exhaust hangers if wanted
option installed saddle tanks good shape
clutch brake pedal assembly
ebrake assembly
4 core radiator could use a freshening
frt sway bar and brkts $40
any piece of the cab for patch panels needed
camper mirrors Restoreable
cab mounts
control arms
leaf springs
steering box pwr
dadadaddadadadda Let me know if there is anything you see that you need.

thanks all again Happy Hunting

Wildbillvette · 05-07-2009, 07:54 AM

Hello I would be interested in the Fan Shroud. How much to ship to 73115? if not too much I will take it.
Thanks in advance,
Bill

s_nova69 · 05-07-2009, 10:58 AM

wildbillvete - sorry the fan shroud has been sold. Let me know if there is anything else you need. Phil

s_nova69 · 05-11-2009, 10:46 AM

There is still a bunch of stuff available for any that want parts. Check the earlier listing I posted for things sold and not sold. Thanks

**southern parts** · 05-12-2009, 08:14 AM

How much for the e-brake cable ? Thanks, Woody

**Don Brace** · 05-15-2009, 07:34 PM

Do you have the rear bumper brackets? I need the pasenger side inner but will take all if you prefer.
Don Brace MN

**Hart_Rod** · 05-15-2009, 10:30 PM

Is the engine strong? Does it smoke? Do you ever make it down south, Albuquerque, Denver????
I also need a radio patch panel. Thanks

**Hart_Rod** · 05-20-2009, 12:06 AM

Also, is the breather and spacer still available? Let me know.

R

**Don Brace** · 05-20-2009, 09:03 AM

Can I get a price on the rear bumper brackets?
Thanks
Don Brace MN

**too much stuff** · 06-13-2009, 06:13 PM

Did anyone get their parts from phil????

turp mcspray · 06-14-2009, 02:52 PM

I got the a/c brackets and fan shroud.
Scott

**too much stuff** · 06-15-2009, 10:27 PM

Phil, any word on where my parts are??

**too much stuff** · 06-18-2009, 09:57 PM

Still waiting for a reply...

ruggirello81 · 06-18-2009, 11:40 PM

I want the motor stands

ruggirello81 · 06-19-2009, 12:59 AM

do you have power steering set up, it will ship to 94559

ruggirello81 · 06-19-2009, 01:04 AM

how much for the radiator and how much is shipping to 94559

**rockc** · 06-19-2009, 09:25 PM

Have you still got the wiring harness under the hood?

05-05-2009, 12:17 AM	#51
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: 71 Longhorn BBC, AC, PS, PB parting out Just so I don't get lost, I am still interested in the lower molding that is close to cab on the passenger side. How much shipped to 95357? __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

05-05-2009, 01:14 AM	#52
s_nova69 Registered User Join Date: Jul 2007 Location: slc, ut Posts: 318	Re: 71 Longhorn BBC, AC, PS, PB parting out your not lost here is the picts from today. Attached Images __________________ Phil '70 Longhorn 421 700r4 tach 4 wheel disc hydroboost daily driver '72 short super build 4wd '72 Suburban LT4 coming soon!!

05-05-2009, 04:02 PM	#54
ajcan Registered User Join Date: Mar 2009 Location: Covington Georgia Posts: 87	Re: 71 Longhorn BBC, AC, PS, PB parting out Phil I will take the hub caps if you will send me a PM I will send funds however you require.Too bad you weren't closer or I would take the wheels too.Shipping would be too much I'm sure. AJ

05-05-2009, 09:13 PM	#55
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 71 Longhorn BBC, AC, PS, PB parting out I would like the lower box mouldings pending price. And a price on shipping to 50169 as well. I'm also in need of a RH upper box moulding as well if you have any extra longhorn stuff. I would love that box side but you are pretty far away. Thanks Ryan. On edit: Since you have sold the RH front one, do you have any others? I'm still interested in any longhorn box trim you may have. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 05-05-2009 at 09:14 PM.

05-05-2009, 09:14 PM	#56
brianthelion02 Overdrive club Join Date: Sep 2007 Location: apache junction, arizona Posts: 819	Re: 71 Longhorn BBC, AC, PS, PB parting out Im interested in the motor mounts and stands,if they are still available?? __________________ 1971 c-10 1951 3100 chevy 1970 chevy c-30 Sold!

05-05-2009, 11:13 PM	#57
coolsun67 Registered User Join Date: Dec 2007 Location: Hill AFB, UT Posts: 16	Re: 71 Longhorn BBC, AC, PS, PB parting out How much to ship the a/c evap box to 84056? thanks

05-06-2009, 12:15 AM	#58
s_nova69 Registered User Join Date: Jul 2007 Location: slc, ut Posts: 318	Re: 71 Longhorn BBC, AC, PS, PB parting out ajcan - pm sent with money transfer info hub caps + shipping Dieselwrencher - pm me about mouldings. All? It will be a couple weeks till I can get to the other upr spears off the other green side but they have holes from someone putting screws through them to hold them on. Look at more picts posted tonight. Brianthelion02 - Motor mounts and stands yours. Pm me your shipping info. I will have them boxed tomorrow and ready awaiting payment. coolsun67 - The truck is in Layton. Pm sent to ya. Thanks all Attached Images __________________ Phil '70 Longhorn 421 700r4 tach 4 wheel disc hydroboost daily driver '72 short super build 4wd '72 Suburban LT4 coming soon!!

05-06-2009, 12:51 AM	#59
s_nova69 Registered User Join Date: Jul 2007 Location: slc, ut Posts: 318	Re: 71 Longhorn BBC, AC, PS, PB parting out ok well lets list stuff sold so far AC brkts - pending payment pwr steering brkts, pump, reservoir, and lines - pending payment fan shroud - pending payment pulleys 400 kick down switch Emblems and seat belts - pending payment hub caps - pending payment engine stands and mounts - pending payment AC underdash - pending payment ac Evap box - pending lower box moulding frt pass side - pending payment Zbar and pivot ball - pending payment Things still available AT cross member $50 drive lines $40 Column (AT non tilt missing shift lever) $50 Windsheild (for those locals) $35 BBC air cleaner and spacer $30 booster and prop $30 rolling chassis (possible rear locker) Come and get it alt brkts $100 AC control $25 frnt blinker assemblies $30 for both good shape BBc 402 engine $400 runs great no smoke come and get it Edelbrock 1406 carb runs good elec choke $100 drivers inner fender $30 factory exhaust hangers if wanted option installed saddle tanks good shape clutch brake pedal assembly ebrake assembly 4 core radiator could use a freshening frt sway bar and brkts $40 any piece of the cab for patch panels needed camper mirrors Restoreable cab mounts control arms leaf springs steering box pwr dadadaddadadadda Let me know if there is anything you see that you need. thanks all again Happy Hunting __________________ Phil '70 Longhorn 421 700r4 tach 4 wheel disc hydroboost daily driver '72 short super build 4wd '72 Suburban LT4 coming soon!!

05-07-2009, 07:54 AM	#60
Wildbillvette Registered User Join Date: Nov 2008 Location: Del City, Oklahoma Posts: 12	Re: 71 Longhorn BBC, AC, PS, PB parting out Hello I would be interested in the Fan Shroud. How much to ship to 73115? if not too much I will take it. Thanks in advance, Bill

05-07-2009, 10:58 AM	#61
s_nova69 Registered User Join Date: Jul 2007 Location: slc, ut Posts: 318	Re: 71 Longhorn BBC, AC, PS, PB parting out wildbillvete - sorry the fan shroud has been sold. Let me know if there is anything else you need. Phil __________________ Phil '70 Longhorn 421 700r4 tach 4 wheel disc hydroboost daily driver '72 short super build 4wd '72 Suburban LT4 coming soon!!

05-11-2009, 10:46 AM	#62
s_nova69 Registered User Join Date: Jul 2007 Location: slc, ut Posts: 318	Re: 71 Longhorn BBC, AC, PS, PB parting out There is still a bunch of stuff available for any that want parts. Check the earlier listing I posted for things sold and not sold. Thanks __________________ Phil '70 Longhorn 421 700r4 tach 4 wheel disc hydroboost daily driver '72 short super build 4wd '72 Suburban LT4 coming soon!!

05-12-2009, 08:14 AM	#63
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: 71 Longhorn BBC, AC, PS, PB parting out How much for the e-brake cable ? Thanks, Woody

05-15-2009, 07:34 PM	#64
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: 71 Longhorn BBC, AC, PS, PB parting out Do you have the rear bumper brackets? I need the pasenger side inner but will take all if you prefer. Don Brace MN __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

05-15-2009, 10:30 PM	#65
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 71 Longhorn BBC, AC, PS, PB parting out Is the engine strong? Does it smoke? Do you ever make it down south, Albuquerque, Denver???? I also need a radio patch panel. Thanks __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 05-15-2009 at 10:33 PM.

05-20-2009, 12:06 AM	#66
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 71 Longhorn BBC, AC, PS, PB parting out Also, is the breather and spacer still available? Let me know. R __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3



Register or Log In To remove these advertisements.

05-20-2009, 09:03 AM	#67
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: 71 Longhorn BBC, AC, PS, PB parting out Can I get a price on the rear bumper brackets? Thanks Don Brace MN __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

06-13-2009, 06:13 PM	#68
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 71 Longhorn BBC, AC, PS, PB parting out Did anyone get their parts from phil???? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-14-2009, 02:52 PM	#69
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: 71 Longhorn BBC, AC, PS, PB parting out I got the a/c brackets and fan shroud. Scott __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

06-15-2009, 10:27 PM	#70
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 71 Longhorn BBC, AC, PS, PB parting out Phil, any word on where my parts are?? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-18-2009, 09:57 PM	#71
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 71 Longhorn BBC, AC, PS, PB parting out Still waiting for a reply... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-18-2009, 11:40 PM	#72
ruggirello81 Registered User Join Date: May 2009 Location: napa,ca Posts: 38	Re: 71 Longhorn BBC, AC, PS, PB parting out I want the motor stands

06-19-2009, 12:59 AM	#73
ruggirello81 Registered User Join Date: May 2009 Location: napa,ca Posts: 38	Re: 71 Longhorn BBC, AC, PS, PB parting out do you have power steering set up, it will ship to 94559

06-19-2009, 01:04 AM	#74
ruggirello81 Registered User Join Date: May 2009 Location: napa,ca Posts: 38	Re: 71 Longhorn BBC, AC, PS, PB parting out how much for the radiator and how much is shipping to 94559

06-19-2009, 09:25 PM	#75
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: 71 Longhorn BBC, AC, PS, PB parting out Have you still got the wiring harness under the hood? __________________ 72 chevy 3/4 ton 4X4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.