misc. cab pieces sf bay area ca - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

byrd · 07-09-2009, 06:22 PM

the top of the rocker, where the door seal would attach, is that part rusted off and if not I want it

Randy

byrd · 07-09-2009, 10:17 PM

Try this, in the pic you see I circled the small piece of door seal left over and then the long piece I encircled that is the piece I am looking for and some metal around it to patch. I will take the whole rocker (pending shipping)if that piece is intact.

**BIGJAKE97** · 07-16-2009, 01:59 PM

ok. byrd passed on the rocker, but i still cut it up. how's $10 plus shipping if anyone needs these to patch in.

**BIGJAKE97** · 07-16-2009, 02:02 PM

also, cut up the dash. $25 plus shipping for a/c templates including the firewall, center vent, and the two outside dash vent templates.

**BIGJAKE97** · 07-16-2009, 02:08 PM

i've seen the front of the dash/windshield seam rust out before too. so i have this if anybody needs a patch?

**michael bustamante** · 07-16-2009, 02:22 PM

Ive got that z bar pivot bracket for a v8 that I think your asking for, do you have those ece drop bracket s for the sway bar still?

jcsarmy · 07-16-2009, 11:13 PM

Hi again. Pls put me in line on the rockers. shipping quote - 65588
Dont know what all you have but I need cab corners, rockers, above the wheels, and fornt bottom of DS fender.

**BIGJAKE97** · 07-17-2009, 01:29 PM

michael bustamante -pm sent. i do not have any lowered sway bar brackets for sale.

jcsarmy -pm sent.

1949gmc -pm sent. yes, i still have the firewall supports. i would have sold the floor, but i got thrown away before i was finished cutting on it. i might have that floor cross support.

thanks, jake

**BIGJAKE97** · 07-23-2009, 01:14 AM

firewall/floor supports sold and shipped. -jake

cleszkie · 01-29-2010, 02:49 PM

Jake,

I will take the A/C dash cut outs. Payment sent. Thanks.

Craig

**BIGJAKE97** · 01-30-2010, 07:29 PM

a/c dash templates sold and shipped. thanks craig. -jake

07-16-2009, 01:59 PM	#3
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: misc. cab pieces sf bay area ca ok. byrd passed on the rocker, but i still cut it up. how's $10 plus shipping if anyone needs these to patch in. Attached Images __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

07-16-2009, 02:02 PM	#4
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: misc. cab pieces sf bay area ca also, cut up the dash. $25 plus shipping for a/c templates including the firewall, center vent, and the two outside dash vent templates. Attached Images __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943! Last edited by BIGJAKE97; 01-28-2010 at 04:01 AM.

07-16-2009, 02:08 PM	#5
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: misc. cab pieces sf bay area ca i've seen the front of the dash/windshield seam rust out before too. so i have this if anybody needs a patch? Attached Images __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

07-16-2009, 02:22 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,878	Re: misc. cab pieces sf bay area ca Ive got that z bar pivot bracket for a v8 that I think your asking for, do you have those ece drop bracket s for the sway bar still? __________________ 1967custom

07-16-2009, 11:13 PM	#7
jcsarmy Registered User Join Date: Jun 2009 Location: Winona MO Posts: 40	Re: misc. cab pieces sf bay area ca Hi again. Pls put me in line on the rockers. shipping quote - 65588 Dont know what all you have but I need cab corners, rockers, above the wheels, and fornt bottom of DS fender. __________________ Im gonna need a lot of help!

07-17-2009, 01:29 PM	#8
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: misc. cab pieces sf bay area ca michael bustamante -pm sent. i do not have any lowered sway bar brackets for sale. jcsarmy -pm sent. 1949gmc -pm sent. yes, i still have the firewall supports. i would have sold the floor, but i got thrown away before i was finished cutting on it. i might have that floor cross support. thanks, jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

07-23-2009, 01:14 AM	#9
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: misc. cab pieces sf bay area ca firewall/floor supports sold and shipped. -jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

01-29-2010, 02:49 PM	#10
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: misc. cab pieces sf bay area ca Jake, I will take the A/C dash cut outs. Payment sent. Thanks. Craig

01-30-2010, 07:29 PM	#11
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: misc. cab pieces sf bay area ca a/c dash templates sold and shipped. thanks craig. -jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.