difference in the Front End on 4x4 3/4 ton trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIGBLU 72 · 07-08-2009, 08:29 PM

I was wondering if the Dana 44 that came under a half ton truck is the same as the one that came under a 3/4 ton truck!

turp mcspray · 07-08-2009, 09:02 PM

Same except for the 8 lug stuff. You could remove all of the outer stuff and swap it out to 6 lug or the other way around.

tucnnuts · 07-09-2009, 10:23 AM

ive got one in my cherokee and i think all i found to be diff. was the 8 lug hub and the caliper backin plate..used same spindle and caliper!! just my 2 cents

turp mcspray · 07-09-2009, 11:18 AM

I guess I should add...there may be minor differences from year to year (my orange 72 has a stabilizer bracket, my ochre one doesn't etc.) but in my mind they are the same 1/2 or 3/4. I'm used to having to modify or fabricate every day so things like that don't make em different, if that makes any sense.

mrein3 · 07-09-2009, 12:08 PM

I don't know if this is true or not but just the other day I had a guy tell me that not only are they the same but you can bolt the 1/2 ton caliper on the 3/4 ton. He did that once for a wheel clearance issue.

Again - I don't know if that is true or not.

07-08-2009, 08:29 PM	#1
BIGBLU 72 Registered User Join Date: Dec 2008 Location: Ashland, KY Posts: 700	difference in the Front End on 4x4 3/4 ton trucks I was wondering if the Dana 44 that came under a half ton truck is the same as the one that came under a 3/4 ton truck! __________________ 68 C10 LWB 2/4 drop 406/th400/3.73posi 04 Silverado SS LQ9 6.0/4L65e/4.11posi AWD

07-08-2009, 09:02 PM	#2
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: difference in the Front End on 4x4 3/4 ton trucks Same except for the 8 lug stuff. You could remove all of the outer stuff and swap it out to 6 lug or the other way around. __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

07-09-2009, 10:23 AM	#3
tucnnuts if they can make it so can I! Join Date: Feb 2008 Location: birmingham, alabama Posts: 97	Re: difference in the Front End on 4x4 3/4 ton trucks ive got one in my cherokee and i think all i found to be diff. was the 8 lug hub and the caliper backin plate..used same spindle and caliper!! just my 2 cents

07-09-2009, 11:18 AM	#4
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: difference in the Front End on 4x4 3/4 ton trucks I guess I should add...there may be minor differences from year to year (my orange 72 has a stabilizer bracket, my ochre one doesn't etc.) but in my mind they are the same 1/2 or 3/4. I'm used to having to modify or fabricate every day so things like that don't make em different, if that makes any sense. __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

07-09-2009, 12:08 PM	#5
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,254	Re: difference in the Front End on 4x4 3/4 ton trucks I don't know if this is true or not but just the other day I had a guy tell me that not only are they the same but you can bolt the 1/2 ton caliper on the 3/4 ton. He did that once for a wheel clearance issue. Again - I don't know if that is true or not. __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.