were can i get a cupholder like this.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 07-09-2009, 07:45 PM

http://images.google.com/imgres?imgu...%3D40%26um%3D1

i only looking for the black cupholders like int he picture...

i made a aluminum sheet of metal that sticks out from under my dash..big enough for 2 cupholders...but i cant find the cupholders anywwere..if soembody wants to see a pic of what i built...i can go take a pic to make you guys understand me better......i just cant post it lol

but im looking for the black cupholders..where can i get some CHEAP?

thanks!

OhioDan · 07-09-2009, 08:14 PM

Ya might try this place?

http://www.americangamingsupply.com/...p-holders.aspx

Someone else on here put some in a console that looked good.

cstm68 · 07-09-2009, 09:16 PM

i went and bought some desk top pen holders with a lip on the top at the local office supply store then i gust cut a hole the size of the base in my console and sliped them in

there are pictures in my build thread on the 2nd and 3rd page (in my sig)

oldblue1968chevy · 07-09-2009, 09:29 PM

YEAH THOSE ARE WHAT IM THINKING OF!!! I HAVENT EVEN CHECKED THE BUILD THREAD

dang, we dont have an office supply store in our town...well a mom and pop place...any other suggestoins were i could get some?

but i want wat your talkin bout lol

71tahoe · 07-09-2009, 10:33 PM

Marine supply store? I see boats with plastic cupholders all the time.

cstm68 · 07-09-2009, 11:41 PM

department stores might have them

prostreetC-10 · 07-09-2009, 11:44 PM

Silly....the can of beer going between your legs. Not in a cup holder!!!

capev86 · 07-10-2009, 10:53 PM

LMC Truck sells a nice 2 cup holder that pops into the ash tray slide on the dash. you just pop out the ash tray as if you were going to empty it and slip the holder into place and visa versa. i want to get one for my 72 burb but have been spending money on a ton of other pieces for my truck. price is only $30!

TonyJohnson · 07-11-2009, 09:30 AM

Poker table supply. They are cheap and come in plastic, stainless or toned. These are the same ones found at marine suppliers...

http://stores.shop.ebay.com/Texas-Po...34Q2ec0Q2em322

Mordachai · 07-11-2009, 09:49 AM

another thought, is go to your local boneyard, and pick through the conversion vans with center and or side consoles. Usually they have the inserts for the cup holders like you're looking for. just make sure to get the right size...

Bentblazer · 07-11-2009, 09:51 AM

Like 71tahoe said A friend just bought some for his boat just like in the pics (West Marine)

07-09-2009, 07:45 PM	#1
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	were can i get a cupholder like this.. http://images.google.com/imgres?imgu...%3D40%26um%3D1 i only looking for the black cupholders like int he picture... i made a aluminum sheet of metal that sticks out from under my dash..big enough for 2 cupholders...but i cant find the cupholders anywwere..if soembody wants to see a pic of what i built...i can go take a pic to make you guys understand me better......i just cant post it lol but im looking for the black cupholders..where can i get some CHEAP? thanks! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-09-2009, 08:14 PM	#2
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Re: were can i get a cupholder like this.. Ya might try this place? http://www.americangamingsupply.com/...p-holders.aspx Someone else on here put some in a console that looked good. __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

07-09-2009, 09:16 PM	#3
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: were can i get a cupholder like this.. i went and bought some desk top pen holders with a lip on the top at the local office supply store then i gust cut a hole the size of the base in my console and sliped them in there are pictures in my build thread on the 2nd and 3rd page (in my sig) __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB Last edited by cstm68; 07-09-2009 at 09:20 PM.

07-09-2009, 09:29 PM	#4
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: were can i get a cupholder like this.. YEAH THOSE ARE WHAT IM THINKING OF!!! I HAVENT EVEN CHECKED THE BUILD THREAD dang, we dont have an office supply store in our town...well a mom and pop place...any other suggestoins were i could get some? but i want wat your talkin bout lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-09-2009, 10:33 PM	#5
71tahoe Registered User Join Date: May 2006 Location: Jonesboro, AR Posts: 916	Re: were can i get a cupholder like this.. Marine supply store? I see boats with plastic cupholders all the time.

07-09-2009, 11:41 PM	#6
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: were can i get a cupholder like this.. department stores might have them __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

07-09-2009, 11:44 PM	#7
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: were can i get a cupholder like this.. Silly....the can of beer going between your legs. Not in a cup holder!!! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

07-10-2009, 10:53 PM	#8
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: were can i get a cupholder like this.. LMC Truck sells a nice 2 cup holder that pops into the ash tray slide on the dash. you just pop out the ash tray as if you were going to empty it and slip the holder into place and visa versa. i want to get one for my 72 burb but have been spending money on a ton of other pieces for my truck. price is only $30!

07-11-2009, 09:30 AM	#9
TonyJohnson Registered User Join Date: Mar 2003 Location: Cheboygan, MI Posts: 998	Re: were can i get a cupholder like this.. Poker table supply. They are cheap and come in plastic, stainless or toned. These are the same ones found at marine suppliers... http://stores.shop.ebay.com/Texas-Po...34Q2ec0Q2em322 __________________ Tony Johnson -- '71 Blazer w/L-31 Vortec 350, SM465, NP205, performer intake, edelbrock 1406, HEI, 4" lift, Boyd EFI tank, Vintage A/C My Blazer -- Last edited by TonyJohnson; 07-11-2009 at 09:31 AM.

07-11-2009, 09:49 AM	#10
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: were can i get a cupholder like this.. another thought, is go to your local boneyard, and pick through the conversion vans with center and or side consoles. Usually they have the inserts for the cup holders like you're looking for. just make sure to get the right size... __________________ 71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72

07-11-2009, 09:51 AM	#11
Bentblazer Registered User Join Date: Sep 2007 Location: Rolla Mo. Posts: 667	Re: were can i get a cupholder like this.. Like 71tahoe said A friend just bought some for his boat just like in the pics (West Marine) __________________ "85" Monte Carlo SS "71" K5 (SOLD) "64" Chevelle 1930 Chevy two door rat

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.