Windshield Gasket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CrashBob · 08-05-2009, 05:57 PM

Hey, all

Where is the best place to get quality, good fitting windshield gasket for my '67 C20. Please don't recommend LMC as the one I got from them was 3/8" too long on both vertical sides. Check out these pix.

Thanks up front,

CrashBob

Sammy · 08-05-2009, 08:57 PM

I think I would be returning that for a refund. precision gaskets I think is the brand your wanting. GMC Pauls I think plus a few other site vendors. Best to give em a ring and explain your experance with poor quality gasket..I have installed a couple that fit poorly but could have been poor quality window also. But never with that much excess gasket over hang.

bdydrp97s10 · 08-05-2009, 10:49 PM

i used soft seal gaskets on my truck.. they atre mopre expensive but everybody i talked to agreed that you dont wnt to be cheap on window gaskets...

tim christian is a site vendor and he is where i bought mine..

his business is christians classics

**Jurassic-1** · 08-05-2009, 10:52 PM

I have had good luck with Precision gaskets. I used to get them from Broyhers truck parts in Cal. Also Steele rubber products.

08-05-2009, 05:57 PM	#1
CrashBob Registered User Join Date: Jun 2004 Location: Utica Nebraska Posts: 244	Windshield Gasket Hey, all Where is the best place to get quality, good fitting windshield gasket for my '67 C20. Please don't recommend LMC as the one I got from them was 3/8" too long on both vertical sides. Check out these pix. Thanks up front, CrashBob Attached Images __________________ "Life is all about ass. You're either covering it,laughing it off, kicking it, kissing it, busting it or trying to get a piece of it.

08-05-2009, 08:57 PM	#2
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Windshield Gasket I think I would be returning that for a refund. precision gaskets I think is the brand your wanting. GMC Pauls I think plus a few other site vendors. Best to give em a ring and explain your experance with poor quality gasket..I have installed a couple that fit poorly but could have been poor quality window also. But never with that much excess gasket over hang. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

08-05-2009, 10:49 PM	#3
bdydrp97s10 Registered User Join Date: Dec 2007 Location: Johnson City TN Posts: 570	Re: Windshield Gasket i used soft seal gaskets on my truck.. they atre mopre expensive but everybody i talked to agreed that you dont wnt to be cheap on window gaskets... tim christian is a site vendor and he is where i bought mine.. his business is christians classics __________________ My build thread--http://67-72chevytrucks.com/vboard/s...d.php?t=300333

08-05-2009, 10:52 PM	#4
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: Windshield Gasket I have had good luck with Precision gaskets. I used to get them from Broyhers truck parts in Cal. Also Steele rubber products.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.