S-10 steering column in a 62 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Oklahoma · 08-05-2009, 07:58 PM

I was wondering if a S-10 steering column would work in a 62 so I had to find out today. Here is the end result. I havent wired it up yet, but it is secured in the truck.

Oklahoma · 08-05-2009, 07:59 PM

Woops

mike73 · 08-05-2009, 10:51 PM

Dangit!!!!! I just GAVE one of those away!!!!

lo72 · 08-07-2009, 09:55 AM

NOW THIS IS SWEET..... I just happen to have an s10 col and a c-10 tilt like this....any pics or advice on what mods and how you got it to fit? I'm looking at installing one in my 70 c-10...thanks

Oklahoma · 08-07-2009, 04:22 PM

It was'nt hard, I used a combination of both support brackets, just alittle imagination and it went together pretty sweet, if you want i could take some pictures of underneath if you want

lo72 · 08-07-2009, 08:59 PM

that would be great any pictures would be great

Bears63 · 08-07-2009, 09:48 PM

Heck yeah, post up pics!!!! I want to know more too, that column looks right at home in there. How about connecting it to the steering box? Have you gotten that done yet?

Oklahoma · 08-08-2009, 09:18 AM

OK the first picture is on the Driver side, and I used a section of the original support bracket, and the highbeam swith pluged right in ( altho I dont know if it works yet, because the cab is off the frame right now) the second picture is of the passenger side of the column, and the upper part is original column support and the lower part is from the new column, just cut and weld. this column is in there tight, dosent budge what so ever. As far as bolting it up to the gear box, like I said the cab is off the frame right now, but i dont fore see any problems with that.
All I have to worry about is the wireing, so if anyone has a wire scamatic for a 62 c-10 and a 93 blazer that would be great.

lo72 · 08-08-2009, 10:07 PM

These pics are sweet. Thanks for taking the time...what kind of bracket are you using at the firewall?

bubba327 · 08-08-2009, 10:51 PM

Looking good . Are you planning to use the hand E-brake again? My 3 on the tree column comes out tomorrow and a tilt column from a automatic Nova is the option A. Thanks for the thread and pictures. Keep us posted on your progress
Did you have to trim any of the plastic from the column? Any trimming of the dash metal?

Oklahoma · 08-09-2009, 04:01 AM

using the stock bracket at the firewall, it bolts right up.

lo72 · 08-09-2009, 06:54 PM

Thanks...now a new piece to the project, If i don't stay off this site I may never finish it!!!!! Thanks again!

bubba327 · 08-09-2009, 11:00 PM

What are your plans for an Emergency brake?

1Bad62Pro/Street · 08-10-2009, 05:22 AM

Not Bad!

Oklahoma · 08-10-2009, 09:40 AM

I dont plan on reusing the e-brake, I have never used it any way, besides it on e-bay right now.

Oklahoma · 08-11-2009, 03:08 PM

Well I just finished wiring it up and it went smoother than I expected. I have the dimmer hooked up, blinkers, wind shield wipers, and the ignition switch hooked up in around 2 hr's. The only thing I dident hook up is the flashers, and I refuse to believe that a chevy will break down and leave me stranded.

:

08-05-2009, 07:58 PM	#1
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	S-10 steering column in a 62 I was wondering if a S-10 steering column would work in a 62 so I had to find out today. Here is the end result. I havent wired it up yet, but it is secured in the truck.

08-05-2009, 07:59 PM	#2
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: S-10 steering column in a 62 Woops Attached Images

08-05-2009, 10:51 PM	#3
mike73 Registered User Join Date: Jul 2009 Location: Los Lunas NewMexico Posts: 60	Re: S-10 steering column in a 62 Dangit!!!!! I just GAVE one of those away!!!!

08-07-2009, 09:55 AM	#4
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: S-10 steering column in a 62 NOW THIS IS SWEET..... I just happen to have an s10 col and a c-10 tilt like this....any pics or advice on what mods and how you got it to fit? I'm looking at installing one in my 70 c-10...thanks Last edited by lo72; 08-07-2009 at 09:55 AM.

08-07-2009, 04:22 PM	#5
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: S-10 steering column in a 62 It was'nt hard, I used a combination of both support brackets, just alittle imagination and it went together pretty sweet, if you want i could take some pictures of underneath if you want

08-07-2009, 08:59 PM	#6
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: S-10 steering column in a 62 that would be great any pictures would be great

08-07-2009, 09:48 PM	#7
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: S-10 steering column in a 62 Heck yeah, post up pics!!!! I want to know more too, that column looks right at home in there. How about connecting it to the steering box? Have you gotten that done yet? __________________ Mike "Bear" Shea

08-08-2009, 09:18 AM	#8
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: S-10 steering column in a 62 OK the first picture is on the Driver side, and I used a section of the original support bracket, and the highbeam swith pluged right in ( altho I dont know if it works yet, because the cab is off the frame right now) the second picture is of the passenger side of the column, and the upper part is original column support and the lower part is from the new column, just cut and weld. this column is in there tight, dosent budge what so ever. As far as bolting it up to the gear box, like I said the cab is off the frame right now, but i dont fore see any problems with that. All I have to worry about is the wireing, so if anyone has a wire scamatic for a 62 c-10 and a 93 blazer that would be great. Attached Images

08-08-2009, 10:07 PM	#9
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: S-10 steering column in a 62 These pics are sweet. Thanks for taking the time...what kind of bracket are you using at the firewall?

08-08-2009, 10:51 PM	#10
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: S-10 steering column in a 62 Looking good . Are you planning to use the hand E-brake again? My 3 on the tree column comes out tomorrow and a tilt column from a automatic Nova is the option A. Thanks for the thread and pictures. Keep us posted on your progress Did you have to trim any of the plastic from the column? Any trimming of the dash metal? __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" Last edited by bubba327; 08-08-2009 at 10:54 PM. Reason: Another question

08-09-2009, 04:01 AM	#11
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: S-10 steering column in a 62 using the stock bracket at the firewall, it bolts right up.

08-09-2009, 06:54 PM	#12
lo72 Truck Junkie Join Date: Aug 2008 Location: Lithia Springs Ga Posts: 354	Re: S-10 steering column in a 62 Thanks...now a new piece to the project, If i don't stay off this site I may never finish it!!!!! Thanks again!

08-09-2009, 11:00 PM	#13
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: S-10 steering column in a 62 What are your plans for an Emergency brake? __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

08-10-2009, 05:22 AM	#14
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: S-10 steering column in a 62 Not Bad! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

08-10-2009, 09:40 AM	#15
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: S-10 steering column in a 62 I dont plan on reusing the e-brake, I have never used it any way, besides it on e-bay right now.



Register or Log In To remove these advertisements.

08-11-2009, 03:08 PM	#16
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: S-10 steering column in a 62 Well I just finished wiring it up and it went smoother than I expected. I have the dimmer hooked up, blinkers, wind shield wipers, and the ignition switch hooked up in around 2 hr's. The only thing I dident hook up is the flashers, and I refuse to believe that a chevy will break down and leave me stranded.:

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.