68 c10 GOES WIDE!!!!! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big_al_71 · 08-19-2009, 05:50 AM

yes you are right, I might as well post the other two picts he sent me....

you did say Lamborghini!!!

STOCKISH · 08-19-2009, 08:01 AM

Well, I guess some people just got it like that. Very nice cars. Thanks for sharing the pics Al. Hopefully we can get some more pics of that truck.

Blitz · 08-19-2009, 11:01 AM

I wonder if the Lambo wheels would fit a C-10.

Wait...of course they do! ANYTHING fits with funds like that! Ok so now I just wonder what they'd look like.

monte0185 · 08-19-2009, 11:06 AM

My question is WHAT does a person do to be able to afford those toys???? Id give my left nut for just one of those motors!!

**FRENCHBLUE72** · 08-19-2009, 10:00 AM

Does this guy have a 606 tree out back that he is pickin these motors from..... Nice toys....

prostreetC-10 · 08-19-2009, 11:16 AM

If I do say so myself.....I don't think his craftmanship can touch mine!!! LOL!!!

It took me hours and hours and hours to get my bed to have that natural "rust" look......but the airbrush came through!

Blitz · 08-19-2009, 11:41 AM

^^^ Too d@m funny.

big_al_71 · 08-19-2009, 12:52 PM

Quote:

Originally Posted by prostreetC-10

If I do say so myself.....I don't think his craftmanship can touch mine!!! LOL!!!

It took me hours and hours and hours to get my bed to have that natural "rust" look......but the airbrush came through!

Definetly his is almost as good as yours !!!!

big_al_71 · 08-19-2009, 12:57 PM

From looking at how his vehicles are built I hardly doubt that the 12 bolt rear end in the truck is anywhere near stock. It might be the stock housing but I am pretty sure it is a Fully Built 12 bolt to hold the torque from that "606" just saying..

prostreetC-10 · 08-19-2009, 12:58 PM

Thanks Al.

I have a very unsuccessful Earth worm farm that funds all of my toys!!

72_cheyenne · 08-19-2009, 06:03 PM

Is that a 18''/20'' wheel combo on the red 68'??

yellowGT · 08-19-2009, 10:38 PM

Quote:

Originally Posted by big_al_71

A friend of a friend of mine emailed him picts of his 68C10 that he bought and decided to go wide and low with it..I dont know many of the details on the truck other than it is a 68 with a 606 cubic inch with big chief heads, seriously out of control show truck according to my buddy. This guy lives in the Florida Keys and is supposed to have some real serious cars. Anyhow I was amazed at how nice this truck is so he forwarded me some picts of it ans I thought I would share with you guys and gals.
My friend is going to see If we can arrange to go see this guys collection in the near future and if i get to go I will sure take lots of picts specially the 68

If he is putting those fat azz wheels on there...see if he will sell the ones that came off the truck.

big_al_71 · 08-20-2009, 10:58 AM

I will have my friend ask him..about the wheels.

msgross · 08-20-2009, 11:12 AM

oh no, Al is going to change his truck again I bet!!!

nice ride..

big_al_71 · 08-22-2009, 11:03 AM

Quote:

Originally Posted by msgross

oh no, Al is going to change his truck again I bet!!!

nice ride..

lol@ Mike
I am not redoing this truck anymore..However I am looking for a 67 or 68 so stay tuned!!!

westbrookw · 08-22-2009, 11:44 AM

Awesome rides! I need money. A lot of inspirationn here.

**Hart_Rod** · 08-22-2009, 11:44 AM

Quote:

Originally Posted by big_al_71

lol@ Mike
I am not redoing this truck anymore..However I am looking for a 67 or 68 so stay tuned!!!

I know where a real solid one (or two) is hanging out................

.

big_al_71 · 08-22-2009, 12:18 PM

Quote:

Originally Posted by Hart_Rod

I know where a real solid one (or two) is hanging out................

.

Well Rob Spill the beans,,,.......email some picts, details and asking price.....
big_al_24x2@yahoo.com dont be holding out on me now!!!

Mordachai · 08-20-2009, 11:56 AM

that's very cool... thanks for sharing.

my67chevytruck · 08-20-2009, 01:15 PM

nice rides. thanks for sharing Al!

DZL1 · 08-22-2009, 12:59 AM

I am speechless.....

DZL1.

Jacfourteen · 08-22-2009, 01:17 AM

is that nitrous I spotted on the camaro in post #44? The 606 isn't enough by itself? Damn, that would be fun though!

sighlurr · 08-22-2009, 01:25 AM

Holy balls!

Speechless.

BigShoe24 · 09-02-2009, 10:28 PM

THIS RIDE IS SICK !!!!!!

I won't one bad

reedwesd · 09-02-2009, 11:15 PM

I must really suck to have money. Awsome truck. Are those custom rear control arms you can buy?

08-19-2009, 05:50 AM	#1
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 68 c10 GOES WIDE!!!!! yes you are right, I might as well post the other two picts he sent me.... you did say Lamborghini!!! Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-19-2009, 08:01 AM	#2
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 68 c10 GOES WIDE!!!!! Well, I guess some people just got it like that. Very nice cars. Thanks for sharing the pics Al. Hopefully we can get some more pics of that truck. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-19-2009, 11:01 AM	#3
Blitz Mr. Thread Killer Join Date: Dec 2008 Location: Norcross, GA Posts: 388	Re: 68 c10 GOES WIDE!!!!! I wonder if the Lambo wheels would fit a C-10. Wait...of course they do! ANYTHING fits with funds like that! Ok so now I just wonder what they'd look like.

08-19-2009, 10:00 AM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Re: 68 c10 GOES WIDE!!!!! Does this guy have a 606 tree out back that he is pickin these motors from..... Nice toys.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-19-2009, 11:16 AM	#6
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: 68 c10 GOES WIDE!!!!! If I do say so myself.....I don't think his craftmanship can touch mine!!! LOL!!! It took me hours and hours and hours to get my bed to have that natural "rust" look......but the airbrush came through! Attached Images __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

08-19-2009, 11:06 AM	#4
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: 68 c10 GOES WIDE!!!!! My question is WHAT does a person do to be able to afford those toys???? Id give my left nut for just one of those motors!! __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

08-19-2009, 11:41 AM	#7
Blitz Mr. Thread Killer Join Date: Dec 2008 Location: Norcross, GA Posts: 388	Re: 68 c10 GOES WIDE!!!!! ^^^ Too d@m funny.

08-19-2009, 12:57 PM	#9
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 68 c10 GOES WIDE!!!!! From looking at how his vehicles are built I hardly doubt that the 12 bolt rear end in the truck is anywhere near stock. It might be the stock housing but I am pretty sure it is a Fully Built 12 bolt to hold the torque from that "606" just saying.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-19-2009, 12:58 PM	#10
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: 68 c10 GOES WIDE!!!!! Thanks Al. I have a very unsuccessful Earth worm farm that funds all of my toys!! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

08-19-2009, 06:03 PM	#11
72_cheyenne Registered User Join Date: Dec 2008 Location: San Antonio Texas Posts: 57	Re: 68 c10 GOES WIDE!!!!! Is that a 18''/20'' wheel combo on the red 68'?? __________________ Red Chevy's

08-20-2009, 10:58 AM	#13
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 68 c10 GOES WIDE!!!!! I will have my friend ask him..about the wheels. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-20-2009, 11:12 AM	#14
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 c10 GOES WIDE!!!!! oh no, Al is going to change his truck again I bet!!! nice ride.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-22-2009, 11:44 AM	#16
westbrookw LET'S GO...MOUNTAINEERS Join Date: Oct 2007 Location: Williamstown, WV Posts: 339	Re: 68 c10 GOES WIDE!!!!! Awesome rides! I need money. A lot of inspirationn here. __________________ 72 SWB/Step

08-20-2009, 11:56 AM	#19
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: 68 c10 GOES WIDE!!!!! that's very cool... thanks for sharing. __________________ 71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72

08-20-2009, 01:15 PM	#20
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 68 c10 GOES WIDE!!!!! nice rides. thanks for sharing Al! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470



Register or Log In To remove these advertisements.

08-22-2009, 12:59 AM	#21
DZL1 One day..... Join Date: Aug 2008 Location: Ocala, FL. Posts: 702	Re: 68 c10 GOES WIDE!!!!! I am speechless..... DZL1.

08-22-2009, 01:17 AM	#22
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: 68 c10 GOES WIDE!!!!! is that nitrous I spotted on the camaro in post #44? The 606 isn't enough by itself? Damn, that would be fun though! __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

08-22-2009, 01:25 AM	#23
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 68 c10 GOES WIDE!!!!! Holy balls! Speechless.

09-02-2009, 10:28 PM	#24
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: 68 c10 GOES WIDE!!!!! THIS RIDE IS SICK !!!!!! I won't one bad __________________ RCC

09-02-2009, 11:15 PM	#25
reedwesd Registered User Join Date: Aug 2009 Location: Winchester TN Posts: 15	Re: 68 c10 GOES WIDE!!!!! I must really suck to have money. Awsome truck. Are those custom rear control arms you can buy?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.