This is a long story, need opinions. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sqrbdy · 07-13-2009, 11:41 PM

Ok, here's the deal. I have been on this board for over a year and a half now and are faced with a huge dilemma. Several months ago I sold my 84 SWB for good money and decided to start a 2wd blazer project, mid 80's style. I bought an 88 model 4wd k5 for $2500 and began the transformation. That project ran out of gas when I found a 96 2 door 2 wheel drive tahoe. I have always wanted a 2dohoe and this one was pretty clean. It needed a new interior, but that was cool because I can do that kind of stuff. Anyway, I managed to part out the K5 and make my money back. So the hoe project began and I finished it in about 2 months. Complete new interior and new 4/6 drop with 20" centerline archer wheels. As a frequent visitor to this board i always kepth the itch to have another square body, 67-72 or 73-87 works for me, it doesnt really matter. I decided to put the tahoe up for sale and have had some decent offers. (10-12.5k) I was asking 14k. I was seriously considering the 12.5k offer when a gentlemen approached me about trading a 67 chevy truck and 72 2wd converted blazer (the blazers have always gave me wood. I know TMI) and a whole pile of parts. The guy said he has all of these new parts for projects that he wanted to start but quite frankly didnt have the time. He has a beautiful nine month old daughter and he wants to spend time with her and the family. I can sympathize as I have a little girl myself. He said he wanted a 2wdhoe and he would trade me all of this stuff for mine. This all sounds crazy and he knows what he has and he knows he is taking a substantial loss money wise. He is not an idiot by any means. He said he wants a good clean custom driver he can get in and go. My dilemma is should i trade and start a new project? I know the answer really depends on me and the amount of time and money i can dedicate to a project. This will probably be a 1-2 year build and pretty sure I can pull it off. I guess what I am really asking is do you think the value is there for all of the parts listed below. I am certain the answer is yes, but would like to hear some input from you guys.

BTW. I have met him and went to his house and saw a bunch of this stuff in person and he is one hell of a nice guy.

Here is a partial parts list and pics of the vehicles involved. He has a lot of stuff not mentioned. Heck, we exchanged a bunch of emails and every other one he was adding stuff. I am going to have to print it out and reconcile the list just so when/if we do the deal i can get everything.

My 2 door hoe

Parts list and truck and blazer pics. The blazer does not look like the pics. It has had the firewall cut out and has not been replaced yet. plus some of the rusted panels have been cut out.

67 short and wide 70 model cab clean truck ran and drove when parked needed rotors and pads and exhaust
72 K5 roller good tub and floors and window frame new door skins
Performa Built 4L65e 700RWHP rated new in box
LS6 engine new wrapped in plastic
New 243 Aluminum Heads
New ARP Head Bolts and Engine Bolt Kit
New Custom Ground Camshaft
New LS6 Intake
20,000 Mile Fuel Injectors
New Coil Packs
Everything to put motor and tranny together with exception of Torque Converter
Accessory Brackets for LS1
Wiring Harness and Computer for LS1
LS1 motor mounts for 67-72
All front end parts ball joint and things
All rubbers for core support
New radiator for K5
New cab mounts for K5
New firewall
New core support not installed
New inner fenders not installed
New outer fenders not installed
New bolts for the front end not installed
New LED taillights not installed
New Inner and outer rockers not installed
Rocker boxes not installed
Floor supports not installed
Front and rear pillar parts not installed
Rocker support panels not installed
Original Blazer Bucket Seats with New Covers
New Blazer Center Console
Seat covers front and rear in plastic not installed
New Complete wiring harness not installed
New Tilt steering column not installed
Complete 73-87 front cross member
C notch kit
New Roll Pan
Headlight bezel
Trim ring clips
Trim Rings
New Billet gauge holder
New Bonspeed Vegas roulette wheel gauges
22 inch Lorinser Wheels
Digital Air Ride Controller
Re7 bags Front and Rear
3/8 Valves (qty 4)
Chrome dual Viar 380 pumps
Extra set of door skins
Complete rubber kit for K5
New Dash Pad for K5
Extreme drop member for rear
One off custom brakes for 5x5 C6 ZO6 by Kore 3
New Complete Interior for Truck (Carpet and Door Panels)
Complete exhaust from C6 Z06
Complete Dash and Wiring from Z-28 Camaro
2 WD Trailing Arm Setup

BossHogg69 · 07-13-2009, 11:53 PM

the Blazer has got some rot, but if you like the journey of building a project, then it's a perfect candidate. Hopefully the 2wd conversion wasn't a butcher shop job. As for that parts list, WOW!!!!! That 67 cleaned up, slammed with the wheels on it, 73-87 crossmember and that LS6 would be SWEET!!! I'd make that baby a Pro Touring beast and never look back!!!

btw, I LOVE 2wd Blazers, any year, and job well done on the '96. It'd be a tough decision (hence your post) but I too love the 67-72's and the square bodies. If it makes you feel better, I sold my pimped out '92 xcab C1500 to finance my '69 build, so I've been there bro. HTH...

big_al_71 · 07-13-2009, 11:56 PM

you my friend have been presented with an awesome deal....If you have the skill what are you waiting for...good luck

Jacfourteen · 07-14-2009, 12:47 AM

with the parts that are included you can't lose...that is if you are willing to take on the project and have the time and skill. The way I look at it you see tahoes every day, if you build the blazer or the truck you will have something different that still has all the modern day benifits of EFI and most of the parts are new to boot. Go for it!

OARNGESI · 07-14-2009, 06:03 AM

Go for it you were wanting to sell the tahoe anyways

sqrbdy · 07-14-2009, 07:29 AM

Just what I figured. You guys are all as crazy as me.

arm51 · 07-14-2009, 07:47 AM

sounds like an awsome deal i would go for it

Sinister · 07-14-2009, 10:56 AM

Sounds like a good trade.

Bamm · 07-14-2009, 11:08 AM

I wouldn't have left his house after looking at all that stuff, I'd be scared that he'd change his mind if he slept on it....

oldblue1968chevy · 07-14-2009, 11:40 AM

go for it

sweet hoe

mikajo39 · 07-14-2009, 01:53 PM

DO IT NOW! (Arnold Schwarzenegger voice) Sounds like apretty awesome deal!

OLDIRON69 · 07-14-2009, 02:19 PM

Like said already...WTF were you thinkin' leavin that house without two new projects?? LOL!

nuke1 · 07-14-2009, 02:56 PM

WOW, what are you aiting for, that engine alone is worth over half that. if it were me i would not have even thout 1 second for that. i would have done it by now, just like a teenage kid getting his first kiss, all horned up and rearing to go. DO IT!

Longhorn Man · 07-14-2009, 05:13 PM

did you swap yet?

sqrbdy · 07-14-2009, 06:16 PM

The deal is in the making. The blazer is currently located about 2hrs south of him now at a friend of his' body shop. he went to pick it up today but ran into some complications. Most of the stuff is 2hrs north of me. I am pretty sure I am going to have to rent a uhaul to transports the parts. there is a lot of them. he leaves to go offshore this sunday, so we are trying to get everything done between then and now. I havent seen the truck in person yet, so not sure which one I will build. I have this thing for blazers, but we will see.

landsurvey1 · 07-14-2009, 07:29 PM

Man, that is one smoking deal!

sqrbdy · 08-25-2009, 06:49 PM

The deal is 95% done. I really feel like I got a smoking deal. The guy I was dealing with is super cool to boot. I have taken possession of everything except the Blazer and I will pick it up on Thursday. It looks like they have started some of the cancer treatment and replaced a few panels. This ought to be a pretty nice project when I am done. I am still undecided if I am going to sell the 67 but will probably do so as I am more interested in the Blazer. Here are a few pics of my recently acquired loot.

BAGNDRAGIT · 08-25-2009, 10:16 PM

WOW!!!!!

what a score.

dan42 · 08-26-2009, 12:11 AM

I'd say you did good. Anything you don't use you can sell. Very nice trade and we're lookin' forward watching your progress on your build.

Jacfourteen · 08-26-2009, 12:39 AM

looks like you have a corvette to match all the parts that were robbed from a corvette (background of first pic in post #17). Great score, now get to work so we can see how it turns out!

Otsa580 · 08-26-2009, 01:40 AM

Well maybe you can build the rare Corvette Option Blazer!

I am jealous!

texanidiot25 · 08-26-2009, 02:31 AM

I'd trade it almost in heart beat. And I LOVE his gauges.

I've seen your truck on CL. I dig it.

sqrbdy · 08-26-2009, 08:36 AM

It should be pretty nice when I finish. I wasnt really looking for a project, but it would have been hard to pass this up. It wont be a fast build, but it will be built right!

A continuation of this thread will be over in the Blazer section after I take possession of the Blazer. I went and looked at it yesterday and a portion of the work has been done.

07-13-2009, 11:53 PM	#2
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: This is a long story, need opinions. the Blazer has got some rot, but if you like the journey of building a project, then it's a perfect candidate. Hopefully the 2wd conversion wasn't a butcher shop job. As for that parts list, WOW!!!!! That 67 cleaned up, slammed with the wheels on it, 73-87 crossmember and that LS6 would be SWEET!!! I'd make that baby a Pro Touring beast and never look back!!! btw, I LOVE 2wd Blazers, any year, and job well done on the '96. It'd be a tough decision (hence your post) but I too love the 67-72's and the square bodies. If it makes you feel better, I sold my pimped out '92 xcab C1500 to finance my '69 build, so I've been there bro. HTH... __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

07-13-2009, 11:56 PM	#3
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: This is a long story, need opinions. you my friend have been presented with an awesome deal....If you have the skill what are you waiting for...good luck __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

07-14-2009, 12:47 AM	#4
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: This is a long story, need opinions. with the parts that are included you can't lose...that is if you are willing to take on the project and have the time and skill. The way I look at it you see tahoes every day, if you build the blazer or the truck you will have something different that still has all the modern day benifits of EFI and most of the parts are new to boot. Go for it! __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

07-14-2009, 06:03 AM	#5
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: This is a long story, need opinions. Go for it you were wanting to sell the tahoe anyways __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

07-14-2009, 07:29 AM	#6
sqrbdy Registered User Join Date: Mar 2008 Location: Spring, Texas Posts: 207	Re: This is a long story, need opinions. Just what I figured. You guys are all as crazy as me. __________________ Ain't Nobody Like a Square Body sqrbdy myspace

07-13-2009, 11:41 PM	#1
sqrbdy Registered User Join Date: Mar 2008 Location: Spring, Texas Posts: 207	This is a long story, need opinions. Ok, here's the deal. I have been on this board for over a year and a half now and are faced with a huge dilemma. Several months ago I sold my 84 SWB for good money and decided to start a 2wd blazer project, mid 80's style. I bought an 88 model 4wd k5 for $2500 and began the transformation. That project ran out of gas when I found a 96 2 door 2 wheel drive tahoe. I have always wanted a 2dohoe and this one was pretty clean. It needed a new interior, but that was cool because I can do that kind of stuff. Anyway, I managed to part out the K5 and make my money back. So the hoe project began and I finished it in about 2 months. Complete new interior and new 4/6 drop with 20" centerline archer wheels. As a frequent visitor to this board i always kepth the itch to have another square body, 67-72 or 73-87 works for me, it doesnt really matter. I decided to put the tahoe up for sale and have had some decent offers. (10-12.5k) I was asking 14k. I was seriously considering the 12.5k offer when a gentlemen approached me about trading a 67 chevy truck and 72 2wd converted blazer (the blazers have always gave me wood. I know TMI) and a whole pile of parts. The guy said he has all of these new parts for projects that he wanted to start but quite frankly didnt have the time. He has a beautiful nine month old daughter and he wants to spend time with her and the family. I can sympathize as I have a little girl myself. He said he wanted a 2wdhoe and he would trade me all of this stuff for mine. This all sounds crazy and he knows what he has and he knows he is taking a substantial loss money wise. He is not an idiot by any means. He said he wants a good clean custom driver he can get in and go. My dilemma is should i trade and start a new project? I know the answer really depends on me and the amount of time and money i can dedicate to a project. This will probably be a 1-2 year build and pretty sure I can pull it off. I guess what I am really asking is do you think the value is there for all of the parts listed below. I am certain the answer is yes, but would like to hear some input from you guys. BTW. I have met him and went to his house and saw a bunch of this stuff in person and he is one hell of a nice guy. Here is a partial parts list and pics of the vehicles involved. He has a lot of stuff not mentioned. Heck, we exchanged a bunch of emails and every other one he was adding stuff. I am going to have to print it out and reconcile the list just so when/if we do the deal i can get everything. My 2 door hoe Parts list and truck and blazer pics. The blazer does not look like the pics. It has had the firewall cut out and has not been replaced yet. plus some of the rusted panels have been cut out. 67 short and wide 70 model cab clean truck ran and drove when parked needed rotors and pads and exhaust 72 K5 roller good tub and floors and window frame new door skins Performa Built 4L65e 700RWHP rated new in box LS6 engine new wrapped in plastic New 243 Aluminum Heads New ARP Head Bolts and Engine Bolt Kit New Custom Ground Camshaft New LS6 Intake 20,000 Mile Fuel Injectors New Coil Packs Everything to put motor and tranny together with exception of Torque Converter Accessory Brackets for LS1 Wiring Harness and Computer for LS1 LS1 motor mounts for 67-72 All front end parts ball joint and things All rubbers for core support New radiator for K5 New cab mounts for K5 New firewall New core support not installed New inner fenders not installed New outer fenders not installed New bolts for the front end not installed New LED taillights not installed New Inner and outer rockers not installed Rocker boxes not installed Floor supports not installed Front and rear pillar parts not installed Rocker support panels not installed Original Blazer Bucket Seats with New Covers New Blazer Center Console Seat covers front and rear in plastic not installed New Complete wiring harness not installed New Tilt steering column not installed Complete 73-87 front cross member C notch kit New Roll Pan Headlight bezel Trim ring clips Trim Rings New Billet gauge holder New Bonspeed Vegas roulette wheel gauges 22 inch Lorinser Wheels Digital Air Ride Controller Re7 bags Front and Rear 3/8 Valves (qty 4) Chrome dual Viar 380 pumps Extra set of door skins Complete rubber kit for K5 New Dash Pad for K5 Extreme drop member for rear One off custom brakes for 5x5 C6 ZO6 by Kore 3 New Complete Interior for Truck (Carpet and Door Panels) Complete exhaust from C6 Z06 Complete Dash and Wiring from Z-28 Camaro 2 WD Trailing Arm Setup __________________ Ain't Nobody Like a Square Body sqrbdy myspace

07-14-2009, 07:47 AM	#7
arm51 beer me Join Date: Jun 2009 Location: west frankfort illinois Posts: 129	Re: This is a long story, need opinions. sounds like an awsome deal i would go for it __________________ 1969 c10 currently on hold because of a darn f**d 1986 f150 1986 silverado-my dads truck that i'm fixin up ill keep my freedom my guns my money my religion and you can keep your CHANGE-hank williams jr

07-14-2009, 10:56 AM	#8
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: This is a long story, need opinions. Sounds like a good trade. __________________ Beat it to fit, Paint it to match...

07-14-2009, 11:08 AM	#9
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Re: This is a long story, need opinions. I wouldn't have left his house after looking at all that stuff, I'd be scared that he'd change his mind if he slept on it.... __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

07-14-2009, 11:40 AM	#10
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: This is a long story, need opinions. go for it sweet hoe __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-14-2009, 01:53 PM	#11
mikajo39 Gearhead and audio junkie Join Date: Aug 2008 Location: nunyah Posts: 452	Re: This is a long story, need opinions. DO IT NOW! (Arnold Schwarzenegger voice) Sounds like apretty awesome deal!

07-14-2009, 02:19 PM	#12
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: This is a long story, need opinions. Like said already...WTF were you thinkin' leavin that house without two new projects?? LOL! __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

07-14-2009, 02:56 PM	#13
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: This is a long story, need opinions. WOW, what are you aiting for, that engine alone is worth over half that. if it were me i would not have even thout 1 second for that. i would have done it by now, just like a teenage kid getting his first kiss, all horned up and rearing to go. DO IT! __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

07-14-2009, 05:13 PM	#14
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: This is a long story, need opinions. did you swap yet?

07-14-2009, 06:16 PM	#15
sqrbdy Registered User Join Date: Mar 2008 Location: Spring, Texas Posts: 207	Re: This is a long story, need opinions. The deal is in the making. The blazer is currently located about 2hrs south of him now at a friend of his' body shop. he went to pick it up today but ran into some complications. Most of the stuff is 2hrs north of me. I am pretty sure I am going to have to rent a uhaul to transports the parts. there is a lot of them. he leaves to go offshore this sunday, so we are trying to get everything done between then and now. I havent seen the truck in person yet, so not sure which one I will build. I have this thing for blazers, but we will see. __________________ Ain't Nobody Like a Square Body sqrbdy myspace



Register or Log In To remove these advertisements.

07-14-2009, 07:29 PM	#16
landsurvey1 Registered User Join Date: Jan 2009 Location: Arizona Posts: 404	Re: This is a long story, need opinions. Man, that is one smoking deal!

08-25-2009, 06:49 PM	#17
sqrbdy Registered User Join Date: Mar 2008 Location: Spring, Texas Posts: 207	Re: This is a long story, need opinions. The deal is 95% done. I really feel like I got a smoking deal. The guy I was dealing with is super cool to boot. I have taken possession of everything except the Blazer and I will pick it up on Thursday. It looks like they have started some of the cancer treatment and replaced a few panels. This ought to be a pretty nice project when I am done. I am still undecided if I am going to sell the 67 but will probably do so as I am more interested in the Blazer. Here are a few pics of my recently acquired loot. __________________ Ain't Nobody Like a Square Body sqrbdy myspace Last edited by sqrbdy; 08-25-2009 at 06:53 PM.

08-25-2009, 10:16 PM	#18
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Re: This is a long story, need opinions. WOW!!!!! what a score. __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

08-26-2009, 12:11 AM	#19
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: This is a long story, need opinions. I'd say you did good. Anything you don't use you can sell. Very nice trade and we're lookin' forward watching your progress on your build. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

08-26-2009, 12:39 AM	#20
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: This is a long story, need opinions. looks like you have a corvette to match all the parts that were robbed from a corvette (background of first pic in post #17). Great score, now get to work so we can see how it turns out! __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

08-26-2009, 01:40 AM	#21
Otsa580 I Love Rusty Chevys Join Date: Jan 2009 Location: Omaha, NE Posts: 617	Re: This is a long story, need opinions. Well maybe you can build the rare Corvette Option Blazer! I am jealous! __________________ 1969 K5 Blazer 1997 1500 Silverado Ext Cab Z71 2010 1500 Silverado Ext Cab Z71

08-26-2009, 02:31 AM	#22
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: This is a long story, need opinions. I'd trade it almost in heart beat. And I LOVE his gauges. I've seen your truck on CL. I dig it.

08-26-2009, 08:36 AM	#23
sqrbdy Registered User Join Date: Mar 2008 Location: Spring, Texas Posts: 207	Re: This is a long story, need opinions. It should be pretty nice when I finish. I wasnt really looking for a project, but it would have been hard to pass this up. It wont be a fast build, but it will be built right! A continuation of this thread will be over in the Blazer section after I take possession of the Blazer. I went and looked at it yesterday and a portion of the work has been done. __________________ Ain't Nobody Like a Square Body sqrbdy myspace

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.