67 cheby's Dropmember build thread (CLOUD 9) - Page 293 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

watahyahknow · 11-29-2012, 06:31 PM

prolly a th700 trans , looks to me like a good choice the fuelinjection prolly makes it run a little cheaper

who knows the trans might just need oil in it

**superflysteiny** · 11-29-2012, 08:09 PM

You better get moving you don't have 10 years on this one
Posted via Mobile Device

**Dieselwrencher** · 11-29-2012, 09:35 PM

I'm assuming you're ditching the 4x4 stuff too, correct?

**67cheby** · 11-29-2012, 09:39 PM

Yes it will be a 2wd when we are done ! And looks like I will be stating a new thread , I just bought it !
Posted via Mobile Device

Zoomin · 11-30-2012, 12:47 AM

Quote:

Originally Posted by 67cheby

no rust at all, it is a 4x4 fuel injected 350 (1987), and it is all there the transmission is bad ! Very solid truck !

Quote:

Originally Posted by 67cheby

Yes it will be a 2wd when we are done ! And looks like I will be stating a new thread , I just bought it !

Tranny is just like Cloud 9. Name this one Cloud 9R1
Posted via Mobile Device

pickup67man · 11-30-2012, 01:02 AM

Quote:

Originally Posted by 67cheby

Yes it will be a 2wd when we are done ! And looks like I will be stating a new thread , I just bought it !
Posted via Mobile Device

Yay. Is it done yet. Need the link to the build. No hurry just don't want to find it when you are on page 285 like Cloud9.
Posted via Mobile Device

**Dieselwrencher** · 11-29-2012, 09:42 PM

Well congrats!!!

FRENCHBLUE72 · 11-29-2012, 09:50 PM

Congrats.... Wheres the new thread =)

El Campo · 11-29-2012, 09:52 PM

I think you will be very happy with it! Less years to rust with one that new!! My brother had an 86 C10 and it was amazing how clean it was even though it lived all its life in South Texas! Looking great

BB72CHEVKT · 11-29-2012, 09:52 PM

I thought this thread would be locked by now.

LODI3QTR · 11-29-2012, 10:39 PM

Look who's on AccuAir's 2012 SEMA Experience in Review.COOOOOL..........

**67cheby** · 11-29-2012, 10:47 PM

Awesome ! Thanks for posting it !
Posted via Mobile Device

RRC · 11-29-2012, 10:49 PM

Congrats on the new ride,looking forward to the new build!!!!
Posted via Mobile Device

**oldman3** · 11-30-2012, 12:23 AM

Mike, starting with decent material, looking forward to you new vision for it....Jim

**screaminchevypickup** · 11-30-2012, 12:50 AM

Looks like a good start!!
Posted via Mobile Device

butternut1972 · 11-30-2012, 01:02 AM

Cool I am looking foward to the blazer build, you better get busy sema is less than a year away.
Posted via Mobile Device

VA72C10 · 11-30-2012, 01:35 AM

Looking forward to it. Waiting for the link

Posted via Mobile Device

watahyahknow · 11-30-2012, 04:29 AM

looking forward to the conversion , i wouldnt be suprized if nathan makes a prototype dropmember / bodydrop setup for it , or are you going to put a 2wd frame under it ?

gringoloco · 11-30-2012, 10:11 AM

We need more pics and a build thread

Posted via Mobile Device

**67cheby** · 11-30-2012, 10:22 AM

Quote:

Originally Posted by Dieselwrencher

Well congrats!!!

thanks !

Quote:

Originally Posted by FRENCHBLUE72

Congrats.... Wheres the new thread =)

coming today !

Quote:

Originally Posted by El Campo

I think you will be very happy with it! Less years to rust with one that new!! My brother had an 86 C10 and it was amazing how clean it was even though it lived all its life in South Texas! Looking great

no rust at all...even in the rockers !! LOL amazing for a chevy/gmc

Quote:

Originally Posted by RRC

Congrats on the new ride,looking forward to the new build!!!!
Posted via Mobile Device

thanks man , me too !

Quote:

Originally Posted by oldman3

Mike, starting with decent material, looking forward to you new vision for it....Jim

Thank you, yes a great starting platform !

Quote:

Originally Posted by Zoomin

Tranny is just like Cloud 9. Name this one Cloud 9R1
Posted via Mobile Device

LOL, project "Square Peg"
[QUOTLOE=screaminchevypickup;5731302]Looks like a good start!!
Posted via Mobile Device[/QUOTE]
The body is super clean....should make it easy for you !

Quote:

Originally Posted by pickup67man

Yay. Is it done yet. Need the link to the build. No hurry just don't want to find it when you are on page 285 like Cloud9.LOL....almost !
Posted via Mobile Device

Quote:

Originally Posted by butternut1972

Cool I am looking foward to the blazer build, you better get busy sema is less than a year away.
Posted via Mobile Device

LOL...yep this one is going to have to come together quick !

Quote:

Originally Posted by VA72C10

Looking forward to it. Waiting for the link

Posted via Mobile Device

today !

Quote:

Originally Posted by watahyahknow

looking forward to the conversion , i wouldnt be suprized if nathan makes a prototype dropmember / bodydrop setup for it , or are you going to put a 2wd frame under it ?

LOL, he probably already has one !

Quote:

Originally Posted by gringoloco

We need more pics and a build thread

Posted via Mobile Device

coming today, i will post a link ASAP ! THANKS EVERYONE !

**67cheby** · 11-30-2012, 10:56 AM

here it is ... http://67-72chevytrucks.com/vboard/s...01#post5731801

VA72C10 · 11-30-2012, 12:04 PM

Cool!
Posted via Mobile Device

**67cheby** · 11-30-2012, 01:46 PM

i have an original wheel that i have fixed all of the cracks in that will get painted and some point and that button put back on !

jlsanborn · 11-30-2012, 02:01 PM

For Cloud 9? I think that'd be WAY cooler than the fancy one you've got on there now. Plus, think of the history you'd be hanging on to

**67cheby** · 11-30-2012, 02:15 PM

it will be on it a some point !maybe just switch it back and forth !

11-29-2012, 06:31 PM	#1
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread (CLOUD 9) prolly a th700 trans , looks to me like a good choice the fuelinjection prolly makes it run a little cheaper who knows the trans might just need oil in it __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-29-2012, 08:09 PM	#2
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 67 cheby's Dropmember build thread (CLOUD 9) You better get moving you don't have 10 years on this one Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-29-2012, 09:35 PM	#3
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 67 cheby's Dropmember build thread (CLOUD 9) I'm assuming you're ditching the 4x4 stuff too, correct? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-29-2012, 09:39 PM	#4
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) Yes it will be a 2wd when we are done ! And looks like I will be stating a new thread , I just bought it ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-29-2012, 09:42 PM	#7
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 67 cheby's Dropmember build thread (CLOUD 9) Well congrats!!! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-29-2012, 09:50 PM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 67 cheby's Dropmember build thread (CLOUD 9) Congrats.... Wheres the new thread =) __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-29-2012, 09:52 PM	#9
El Campo Registered User Join Date: Jul 2011 Location: El Campo, Tx Posts: 1,246	Re: 67 cheby's Dropmember build thread (CLOUD 9) I think you will be very happy with it! Less years to rust with one that new!! My brother had an 86 C10 and it was amazing how clean it was even though it lived all its life in South Texas! Looking great __________________ 72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!!

11-29-2012, 09:52 PM	#10
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: 67 cheby's Dropmember build thread (CLOUD 9) I thought this thread would be locked by now. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

11-29-2012, 10:39 PM	#11
LODI3QTR Registered User Join Date: Apr 2012 Location: Smithtown New York Posts: 156	Re: 67 cheby's Dropmember build thread (CLOUD 9) Look who's on AccuAir's 2012 SEMA Experience in Review.COOOOOL.......... __________________ LEFT LANE IS FOR PASSING!!!! SLOWER TRAFFIC KEEP RIGHT!!!! My C20 & Cars... http://67-72chevytrucks.com/gallery/...&ppuser=111212

11-29-2012, 10:47 PM	#12
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) Awesome ! Thanks for posting it ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-29-2012, 10:49 PM	#13
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: 67 cheby's Dropmember build thread (CLOUD 9) Congrats on the new ride,looking forward to the new build!!!! Posted via Mobile Device

11-30-2012, 12:23 AM	#14
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: 67 cheby's Dropmember build thread (CLOUD 9) Mike, starting with decent material, looking forward to you new vision for it....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

11-30-2012, 12:50 AM	#15
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 67 cheby's Dropmember build thread (CLOUD 9) Looks like a good start!! Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

11-30-2012, 01:02 AM	#16
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: 67 cheby's Dropmember build thread (CLOUD 9) Cool I am looking foward to the blazer build, you better get busy sema is less than a year away. Posted via Mobile Device __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

11-30-2012, 01:35 AM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 67 cheby's Dropmember build thread (CLOUD 9) Looking forward to it. Waiting for the link Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

11-30-2012, 04:29 AM	#18
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread (CLOUD 9) looking forward to the conversion , i wouldnt be suprized if nathan makes a prototype dropmember / bodydrop setup for it , or are you going to put a 2wd frame under it ? __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-30-2012, 10:11 AM	#19
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 67 cheby's Dropmember build thread (CLOUD 9) We need more pics and a build thread Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-30-2012, 10:56 AM	#21
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) here it is ... http://67-72chevytrucks.com/vboard/s...01#post5731801 __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-30-2012, 12:04 PM	#22
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 67 cheby's Dropmember build thread (CLOUD 9) Cool! Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-30-2012, 01:46 PM	#23
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) i have an original wheel that i have fixed all of the cracks in that will get painted and some point and that button put back on ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-30-2012, 02:01 PM	#24
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: 67 cheby's Dropmember build thread (CLOUD 9) For Cloud 9? I think that'd be WAY cooler than the fancy one you've got on there now. Plus, think of the history you'd be hanging on to __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

11-30-2012, 02:15 PM	#25
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) it will be on it a some point !maybe just switch it back and forth ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.