Parting out soon: 1970 GMC Suburban 3/4 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimmyFloyd · 09-01-2009, 10:33 PM

ok, i got to look over my 1970 suburban and decided that there is a lot more rust on it than I want to deal with. Therefore, it is getting parted out.

I am keeping the front end to swap onto my blazer, and the motor/trans/transfer case to build up. Other than that, i believe i am going to sell everything.

Some of the parts I know will be sold:

Factory tow hooks - $275 shipped
radio delete plate - $25 shipped
gauge cluster with gauges, no tach ~60k showing. - 65 shipped

rear wheel tubs - Not ready yet
spare tire tubs - Not ready yet
green dash pad - Not ready yet
Speedostat Cruise Control system - Not ready yet
Trailer brake system - Not ready yet
Aftermarket underdash AC unit and parts - Not ready yet
rear door parts - Not ready yet
rear filler cover - Not ready yet
Eaton HO52 No-Spin rear end. 4:56's I believe - Not ready yet
Bolt on skid plate for above - Not ready yet
Rear side trim - Not ready yet
Rear carpet hold downs - Not ready yet
2nd gas tank under rear seat - Not ready yet
Dual tank selector switch and associated components - Not ready yet

Will sell the frame, with title, glove box, and driver's door pillar. Frame is in very good shape, no rot. just surface in a couple spots. Hitch welded to frame. Will include the remainder of the body too.

I will also cut out portions of the body for anyone who wants them, as I will be junking whatever isn't sold or in my garage.

prices will be added once I get pictures of the parts and they are ready to be removed. I can only get up there to remove parts once during the week, and once on the weekends, so bear with me. I will add prices and parts once I have them removed or ready to remove.

teeitup · 09-01-2009, 10:44 PM

how much for the towhooks? Thanks Randy

**too much stuff** · 09-01-2009, 11:05 PM

Towhooks and cruise setup? Eric

**too much stuff** · 09-01-2009, 11:06 PM

And a price on the lock out hubs...

olblue60@aol.com · 09-01-2009, 11:33 PM

The three doorlocks and keys ?

Thanks

John

*mickeymouse* · 09-02-2009, 07:44 AM

How's the left front fender?

I am not sure if you meant "front end" as the front axle or the hood, fenders and grill...

JimmyFloyd · 09-02-2009, 09:42 AM

I'll have to research the prices on some of these, as I don't have a clue what they are worth yet.

The Lock cylinders are there, but the key I have does not work them. Going to try and have a key made by a lock smith if possibly so I don't have to worry about people taking parts from it.

By front end, I mean the front clip, fenders, hood, grill, core, etc so I can swap my blazer to the GMC front end.

Lockout hubs turn freely. They say spicer on them. Will have to research their price too.

There are several people who have PMed me or posted here about the tow hooks. Once I figure out a price, I will either go in order that I received questions about them, or I can put them on ebay for free-market to make the decision. Not sure which way would be fairest.

And I was able to get more pictures last night. Take a look:

http://s282.photobucket.com/albums/k...82/70Suburban/

**71blksuper4x4** · 09-02-2009, 10:33 AM

how does the boot and metal ring look for the transfer case shifter that bolt to the carpet? Trevor

JimmyFloyd · 09-02-2009, 10:38 AM

Quote:

Originally Posted by 71blksuper4x4

how does the boot and metal ring look for the transfer case shifter that bolt to the carpet? Trevor

This is the only picture I have of it. I can look closer when I go back later this week.

As an FYI, The truck is located about 15 minutes from me at my parents house, since the City and the GF didn't want it in the driveway, and it doesn't quite fit in the garage at the moment. I tried to take a bunch of pictures, which are in the link in my previous post, but if there is something you need to see, let me know and I'll try and get it on my next trip there.

**71blksuper4x4** · 09-02-2009, 10:38 AM

Also, are you keeping the transfer case shifter? I would be interested in the transfer case knob (if the 4x4 pattern is on it) and shifter linkage Thanks

Mint68 · 09-02-2009, 11:29 AM

I'd be interested in the tow hooks aswell...

redneckgirl · 09-02-2009, 01:01 PM

This is just a reminder of the rules:
No PM sales are permitted
Prices MUST be included in for sale threads
No sales permitted where bidding is involved. Prices MUST be stated. 'Making an offer' is not acceptable.

Thank you....

JimmyFloyd · 09-02-2009, 02:21 PM

Asked to have this locked as I realize I won't be able to get back and remove stuff for atleast a week or two. Will come back with it more organized and prices added once stuff is off the truck.

09-01-2009, 10:33 PM	#1
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Parting out soon: 1970 GMC Suburban 3/4 ton ok, i got to look over my 1970 suburban and decided that there is a lot more rust on it than I want to deal with. Therefore, it is getting parted out. I am keeping the front end to swap onto my blazer, and the motor/trans/transfer case to build up. Other than that, i believe i am going to sell everything. Some of the parts I know will be sold: Factory tow hooks - $275 shipped radio delete plate - $25 shipped gauge cluster with gauges, no tach ~60k showing. - 65 shipped rear wheel tubs - Not ready yet spare tire tubs - Not ready yet green dash pad - Not ready yet Speedostat Cruise Control system - Not ready yet Trailer brake system - Not ready yet Aftermarket underdash AC unit and parts - Not ready yet rear door parts - Not ready yet rear filler cover - Not ready yet Eaton HO52 No-Spin rear end. 4:56's I believe - Not ready yet Bolt on skid plate for above - Not ready yet Rear side trim - Not ready yet Rear carpet hold downs - Not ready yet 2nd gas tank under rear seat - Not ready yet Dual tank selector switch and associated components - Not ready yet Will sell the frame, with title, glove box, and driver's door pillar. Frame is in very good shape, no rot. just surface in a couple spots. Hitch welded to frame. Will include the remainder of the body too. I will also cut out portions of the body for anyone who wants them, as I will be junking whatever isn't sold or in my garage. prices will be added once I get pictures of the parts and they are ready to be removed. I can only get up there to remove parts once during the week, and once on the weekends, so bear with me. I will add prices and parts once I have them removed or ready to remove. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3 Last edited by JimmyFloyd; 09-02-2009 at 02:18 PM. Reason: posting violation

09-01-2009, 10:44 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out soon: 1970 GMC Suburban 3/4 ton how much for the towhooks? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-01-2009, 11:05 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	Re: Parting out soon: 1970 GMC Suburban 3/4 ton Towhooks and cruise setup? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-01-2009, 11:06 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	Re: Parting out soon: 1970 GMC Suburban 3/4 ton And a price on the lock out hubs... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-01-2009, 11:33 PM	#5
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Parting out soon: 1970 GMC Suburban 3/4 ton The three doorlocks and keys ? Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

09-02-2009, 07:44 AM	#6
mickeymouse Account Suspended Join Date: Nov 2005 Location: Where ever the Navy sends me. Posts: 116	Re: Parting out soon: 1970 GMC Suburban 3/4 ton How's the left front fender? I am not sure if you meant "front end" as the front axle or the hood, fenders and grill...

09-02-2009, 09:42 AM	#7
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Parting out soon: 1970 GMC Suburban 3/4 ton I'll have to research the prices on some of these, as I don't have a clue what they are worth yet. The Lock cylinders are there, but the key I have does not work them. Going to try and have a key made by a lock smith if possibly so I don't have to worry about people taking parts from it. By front end, I mean the front clip, fenders, hood, grill, core, etc so I can swap my blazer to the GMC front end. Lockout hubs turn freely. They say spicer on them. Will have to research their price too. There are several people who have PMed me or posted here about the tow hooks. Once I figure out a price, I will either go in order that I received questions about them, or I can put them on ebay for free-market to make the decision. Not sure which way would be fairest. And I was able to get more pictures last night. Take a look: http://s282.photobucket.com/albums/k...82/70Suburban/ __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3 Last edited by redneckgirl; 09-02-2009 at 12:56 PM. Reason: posting violation

09-02-2009, 10:33 AM	#8
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,152	Re: Parting out soon: 1970 GMC Suburban 3/4 ton how does the boot and metal ring look for the transfer case shifter that bolt to the carpet? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

09-02-2009, 10:38 AM	#10
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,152	Re: Parting out soon: 1970 GMC Suburban 3/4 ton Also, are you keeping the transfer case shifter? I would be interested in the transfer case knob (if the 4x4 pattern is on it) and shifter linkage Thanks __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

09-02-2009, 11:29 AM	#11
Mint68 Registered User Join Date: Nov 2004 Location: Nebraska Posts: 762	Re: Parting out soon: 1970 GMC Suburban 3/4 ton I'd be interested in the tow hooks aswell...

09-02-2009, 01:01 PM	#12
redneckgirl Registered User Join Date: Jun 2006 Location: Bel Air, Maryland Posts: 4,853	Re: Parting out soon: 1970 GMC Suburban 3/4 ton This is just a reminder of the rules: No PM sales are permitted Prices MUST be included in for sale threads No sales permitted where bidding is involved. Prices MUST be stated. 'Making an offer' is not acceptable. Thank you.... __________________ The place where you made your stand never mattered. Only that you were there... and still on your feet. Stephen King

09-02-2009, 02:21 PM	#13
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Parting out soon: 1970 GMC Suburban 3/4 ton Asked to have this locked as I realize I won't be able to get back and remove stuff for atleast a week or two. Will come back with it more organized and prices added once stuff is off the truck. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.