The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-17-2009, 12:40 PM   #1
jimmybeus
Registered User
 
jimmybeus's Avatar
 
Join Date: Nov 2008
Location: La Barge Wyoming
Posts: 63
Going to pick up my '67

I'm going over to my parents house where my '67 has been sitting for the last ten years. I was going to try and put the '94 TBI motor in it but after reading all that is involved I think I will just carb it out till I can get a better fuel inj. motor. Questions: Where is the best place to get the motor mounts that will go from a 292 to a 350? Or do I take the blocks off the 67 frame rails and then will it be set up for a 350? Is there a place that sells intake and carb set up for this conversion or does someone know what I will need? Can I use the old 4 speed transmission with newer motor? Eventually I want to put a 4l60e behind it but for now just want to get it running and driveable. I dont have a lot of money to work with right now so I am trying to get by with what I have at my disposal. The donor truck is a 1994 chev 4x4. I figured the 5 speed out of that truck wont work where it has a transfer case on it. Any suggestions or advice greatly appreciated. Try and post some pics tomorrow after I get it home.
Sorry if this is long winded but after looking at the post and pics on here, it has really got me pumped to start on the ol project again. Thanks
jimmybeus is offline   Reply With Quote
Old 09-17-2009, 04:09 PM   #2
19673ontree
CAN'T FIX NOTHIN
 
19673ontree's Avatar
 
Join Date: Sep 2006
Location: SOUTHRUST VIRGINIA !!!
Posts: 2,112
Talking Re: Going to pick up my '67

it is a $100 fine and six month's in jail to make a post like this without pic's
better get some pic's QUICK before someone see's this
__________________
1967 C10 Shortbed Fleetside Small back glass
6 cyl 3spd on the tree 3.08 gears
underdash AC
19673ontree is offline   Reply With Quote
Old 09-18-2009, 10:00 PM   #3
jimmybeus
Registered User
 
jimmybeus's Avatar
 
Join Date: Nov 2008
Location: La Barge Wyoming
Posts: 63
Re: Going to pick up my '67

Well I got the '67 home today. Here are some pictures of the ol gal. My grandfather purchased new then gave it to my dad and then, before I was old enough to drive, it was handed down to me. It hasn't ran in about 15 years. I tried replacing the fuel pump, cleaned the tank, rebuilt the carb but still couldnt get it running. Now that I have this donor truck I want to put a whole different set up in it.
Attached Images
     
jimmybeus is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:28 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com