1970 Blazer Part out or sell whole - The 1947 - Present Chevrolet & GMC Truck Message Board Network

extd56 · 10-24-2009, 10:40 AM

I picked up a 1970 Blazer that I thought was in a lot better shape than it was. It has rust by the drivers side kick panel and some on the bed by the tailgate. The rockers and the rocker boxes look to be in pretty good condition. I have not played with the Blazers before so I thought to ask here. I was going to take a few parts for my crew cab buildup and then???

Longhorn Man · 10-24-2009, 10:43 AM

dude... please do not kill that truck.
Sell it on line an dlet someone get it who does not have access to low amounts of rust.
It boils down to do what ever the heck you want.... you own it. BUT... That thing is FAR from being junk.

extd56 · 10-24-2009, 10:56 AM

I found some money on the floor. I did not want to do another project, just wanted to get a nice driver.

extd56 · 10-24-2009, 11:17 AM

I found some rust behind the passenger door that was covered up by the panels that the Po told me was there and was not fixed when it was painted. It was a A/C cab but is missing a lot of parts now.

extd56 · 10-24-2009, 11:18 AM

More pics

extd56 · 10-24-2009, 11:20 AM

The axles are from a 72 Blazer and I was told that the rear end is a posi. The front and rear fenders were cut to fit 38" tires but now has 35" tires.

turp mcspray · 10-24-2009, 12:01 PM

Too saveable to part! I say either sell it and buy a better one to drive, or start the repair process. Either way, if you want a better blazer, it's gonna cost more money.

**Classic Heartbeat** · 10-24-2009, 12:19 PM

It's up to you. If you need parts from it for one of your builds then part it out. You could try to sell it as a whole tub and chassis once you take the parts you need first and if it doesn't work out then part it. It takes nice parts to restore other Blazers so it's not like it would be just killing another Blazer. And heck, I would be interested in the windshield frame if it is in good condition so I can have them reproduced. WES

cdowns · 10-24-2009, 12:21 PM

make yourself the most money possible chop it up and sell the parts

**leddzepp** · 10-24-2009, 12:23 PM

I would take what I needed and sell the rest. Good luck with whatever you decide to do.

extd56 · 10-24-2009, 12:26 PM

Quote:

Originally Posted by Classic Heartbeat

It's up to you. If you need parts from it for one of your builds then part it out. You could try to sell it as a whole tub and chassis once you take the parts you need first and if it doesn't work out then part it. It takes nice parts to restore other Blazers so it's not like it would be just killing another Blazer. And heck, I would be interested in the windshield frame if it is in good condition so I can have them reproduced. WES

The only parts that I would use is the front light bar, the inside roll cage and the steps. I was looking for a nice driver and was told that this truck had no rust and drove a couple of hours in the mountains to look at it only to find rust. I have never done a Blazer before but I do not have my crew cab done yetand I was not looking for a project and I am not going to be doing a project anytime soon.

**68350** · 10-24-2009, 02:39 PM

Personally, you could probably sell it for what you bought it for if thats all you are taking off of it. However, if it doesn't sell, don't lower your price right away, part it because blazer parts usually go for some good money.

**Thealien** · 10-24-2009, 03:26 PM

Quote:

Originally Posted by Classic Heartbeat

It's up to you. If you need parts from it for one of your builds then part it out. You could try to sell it as a whole tub and chassis once you take the parts you need first and if it doesn't work out then part it. It takes nice parts to restore other Blazers so it's not like it would be just killing another Blazer. And heck, I would be interested in the windshield frame if it is in good condition so I can have them reproduced. WES

I was going to ask about the WS frame but you beat me to it. I don't "need" one but they are getting harder to find. If you are going to get them made I WANT you to get it

69TowRig · 10-24-2009, 03:52 PM

Sell it whole, it's a lot more complete than most are buying nowadays. You should get your money back no sweat.

extd56 · 10-24-2009, 06:00 PM

Quote:

Originally Posted by 68350

Personally, you could probably sell it for what you bought it for if thats all you are taking off of it. However, if it doesn't sell, don't lower your price right away, part it because blazer parts usually go for some good money.

I got the Blazer at a good price, seeing as I had to tow it 160 miles. What do you think it would be worth?

extd56 · 10-24-2009, 09:07 PM

Cleaned out the Blazer today to see how bad it really looks and it looked worse before I cleaned it.

extd56 · 10-24-2009, 09:10 PM

I also throw out the van seats and put in for now some 2003 seats.

Rokcrln · 10-24-2009, 09:27 PM

Quote:

Originally Posted by Classic Heartbeat

It's up to you. If you need parts from it for one of your builds then part it out. You could try to sell it as a whole tub and chassis once you take the parts you need first and if it doesn't work out then part it. It takes nice parts to restore other Blazers so it's not like it would be just killing another Blazer. And heck, I would be interested in the windshield frame if it is in good condition so I can have them reproduced. WES

How much of one do you need? I have two up in the rafters and the larger section one is in good shape if I remember right and the other one is better then most bad ones I have seen.

Kevin
LFD Inc.

[IMG]

[/IMG]

sleepertruck72 · 10-25-2009, 01:26 AM

Take that thing and play in the mud before you decide to keep it or sell it

local13hutch · 10-27-2009, 08:55 AM

I agree it looks alot better cleaned out and the replacement panels are cheap it wouldnt take to much to seal it up and make it road worthy and have some fun ..I just got my sons k/5 back on the road again and I had forgot how much fun these short wheel base trucks are off road its been a long time it's like drivin a jeep compared to my sub...I say make her road worthy and have some fun...Just my two cents worth...

independentcustoms · 10-27-2009, 09:50 AM

I would do some quick patch work and make it driveable, and drive it. Doesn't look bad at all (then again, I'm in NY and that's what our nice trucks look like!)

mclairmo · 10-27-2009, 02:46 PM

Quote:

Originally Posted by independentcustoms

I would do some quick patch work and make it driveable, and drive it. Doesn't look bad at all (then again, I'm in NY and that's what our nice trucks look like!)

X2, a day of cutting and welding and that floor will look like new again. Patch panels are not hard to do. Fix the rust and drive it or sell it.

JimmyFloyd · 10-27-2009, 04:58 PM

Quote:

Originally Posted by independentcustoms

I would do some quick patch work and make it driveable, and drive it. Doesn't look bad at all (then again, I'm in NY and that's what our nice trucks look like!)

I agree. I bought the best one I could find locally and still isn't that nice.

extd56 · 10-27-2009, 05:07 PM

Well I have spent some time on the Blazer and have got it running but it will need a new carb or rebuild the one on it. I want to drive it hopefully by the end of the week but will be selling it I am sure once my crew cab comes back home from paint. Too many trucks I was told from the boss but I just hate seeing them neglected.

extd56 · 10-27-2009, 06:13 PM

Quote:

Originally Posted by local13hutch

I agree it looks alot better cleaned out and the replacement panels are cheap it wouldnt take to much to seal it up and make it road worthy and have some fun ..I just got my sons k/5 back on the road again and I had forgot how much fun these short wheel base trucks are off road its been a long time it's like drivin a jeep compared to my sub...I say make her road worthy and have some fun...Just my two cents worth...

My parking space is always tight around the house ad I have already filled up the garge at my daughters house. Are you coming up this week to get the Suburban? I am getting new blades for the sawzall, always love cutting up things.

10-24-2009, 10:40 AM	#1
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	1970 Blazer Part out or sell whole I picked up a 1970 Blazer that I thought was in a lot better shape than it was. It has rust by the drivers side kick panel and some on the bed by the tailgate. The rockers and the rocker boxes look to be in pretty good condition. I have not played with the Blazers before so I thought to ask here. I was going to take a few parts for my crew cab buildup and then??? Attached Images Last edited by extd56; 11-10-2009 at 12:02 AM.

10-24-2009, 10:43 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: 1970 Blazer Part out or sell whole dude... please do not kill that truck. Sell it on line an dlet someone get it who does not have access to low amounts of rust. It boils down to do what ever the heck you want.... you own it. BUT... That thing is FAR from being junk.

10-24-2009, 10:56 AM	#3
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 1970 Blazer Part out or sell whole I found some money on the floor. I did not want to do another project, just wanted to get a nice driver. Attached Images Last edited by extd56; 11-10-2009 at 12:03 AM.

10-24-2009, 11:17 AM	#4
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 1970 Blazer Part out or sell whole I found some rust behind the passenger door that was covered up by the panels that the Po told me was there and was not fixed when it was painted. It was a A/C cab but is missing a lot of parts now. Attached Images Last edited by extd56; 10-24-2009 at 11:18 AM.

10-24-2009, 11:18 AM	#5
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 1970 Blazer Part out or sell whole More pics Attached Images Last edited by extd56; 10-24-2009 at 11:22 AM.

10-24-2009, 11:20 AM	#6
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 1970 Blazer Part out or sell whole The axles are from a 72 Blazer and I was told that the rear end is a posi. The front and rear fenders were cut to fit 38" tires but now has 35" tires. Attached Images

10-24-2009, 12:01 PM	#7
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: 1970 Blazer Part out or sell whole Too saveable to part! I say either sell it and buy a better one to drive, or start the repair process. Either way, if you want a better blazer, it's gonna cost more money. __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

10-24-2009, 12:19 PM	#8
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: 1970 Blazer Part out or sell whole It's up to you. If you need parts from it for one of your builds then part it out. You could try to sell it as a whole tub and chassis once you take the parts you need first and if it doesn't work out then part it. It takes nice parts to restore other Blazers so it's not like it would be just killing another Blazer. And heck, I would be interested in the windshield frame if it is in good condition so I can have them reproduced. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

10-24-2009, 12:21 PM	#9
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: 1970 Blazer Part out or sell whole make yourself the most money possible chop it up and sell the parts __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-24-2009, 12:23 PM	#10
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1970 Blazer Part out or sell whole I would take what I needed and sell the rest. Good luck with whatever you decide to do. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

10-24-2009, 02:39 PM	#12
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1970 Blazer Part out or sell whole Personally, you could probably sell it for what you bought it for if thats all you are taking off of it. However, if it doesn't sell, don't lower your price right away, part it because blazer parts usually go for some good money. __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

10-24-2009, 03:52 PM	#14
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: 1970 Blazer Part out or sell whole Sell it whole, it's a lot more complete than most are buying nowadays. You should get your money back no sweat. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

10-24-2009, 09:07 PM	#16
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 1970 Blazer Part out or sell whole Cleaned out the Blazer today to see how bad it really looks and it looked worse before I cleaned it. Attached Images

10-24-2009, 09:10 PM	#17
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 1970 Blazer Part out or sell whole I also throw out the van seats and put in for now some 2003 seats. Attached Images

10-25-2009, 01:26 AM	#19
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 1970 Blazer Part out or sell whole Take that thing and play in the mud before you decide to keep it or sell it __________________ 72 C20 Longbed 05 1500 Z71



Register or Log In To remove these advertisements.

10-27-2009, 08:55 AM	#20
local13hutch MEMBER Join Date: Mar 2006 Location: garden grove, ca Posts: 185	Re: 1970 Blazer Part out or sell whole I agree it looks alot better cleaned out and the replacement panels are cheap it wouldnt take to much to seal it up and make it road worthy and have some fun ..I just got my sons k/5 back on the road again and I had forgot how much fun these short wheel base trucks are off road its been a long time it's like drivin a jeep compared to my sub...I say make her road worthy and have some fun...Just my two cents worth... __________________ 86 sub 4wd, 1 ton, duallie, big block th475 72 c10 short fleet, pro street 72 K/5 blazer,2x4 almost stock 72 3/4 ton sub 4x4 61 morris minor pickup, chevy 4.3 v6 03 escalade, 24" momo's wifes 96 2wd 2door tahoe 67 2wd suburban 72 4wd k5 99 vortec 14bolt/d60 205/th400- 72 4wd crewcab 1 ton sb cummins allison -2012 2ss camaro black hard top- 8 yamaha quads- 05 4wd one ton duramax dually, family limo.

10-27-2009, 09:50 AM	#21
independentcustoms Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 133	Re: 1970 Blazer Part out or sell whole I would do some quick patch work and make it driveable, and drive it. Doesn't look bad at all (then again, I'm in NY and that's what our nice trucks look like!)

10-27-2009, 05:07 PM	#24
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 1970 Blazer Part out or sell whole Well I have spent some time on the Blazer and have got it running but it will need a new carb or rebuild the one on it. I want to drive it hopefully by the end of the week but will be selling it I am sure once my crew cab comes back home from paint. Too many trucks I was told from the boss but I just hate seeing them neglected.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.