AZ Shortbed upper/lower moulding set - The 1947 - Present Chevrolet & GMC Truck Message Board Network

duceducenine · 11-06-2009, 01:32 AM

so you have all the clips
or at least enough to make
them work ...to install.....?

**t korinek** · 11-06-2009, 03:10 AM

I have all the clips you would need to install this trim, upper & lower, the metal clips were used if you had the trim originally & had all the holes drilled in the body, the plastic seems to be used when you don't have/want holes drilled, but still usually have at least 1 metal clip at each end of the trim.
Tom

I'll be away from the board this weekend, but if you want them post here to hold them.

11-06-2009, 01:32 AM	#1
duceducenine Registered User Join Date: Nov 2006 Location: el sobrante CA 94803 Posts: 284	Re: Shortbed upper/lower moulding set so you have all the clips or at least enough to make them work ...to install.....?

11-06-2009, 03:10 AM	#2
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: Shortbed upper/lower moulding set I have all the clips you would need to install this trim, upper & lower, the metal clips were used if you had the trim originally & had all the holes drilled in the body, the plastic seems to be used when you don't have/want holes drilled, but still usually have at least 1 metal clip at each end of the trim. Tom I'll be away from the board this weekend, but if you want them post here to hold them. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.