project INCREDIBLE HULK 6.2L with 6L80E

[68 short step]

welp after installing the PB rear suspension, the added drop put the rear end at a crazy bad angle...so the rear end was pulled out, mounting pads cut off, set proper pinion angle at ride height, and weld them back on.... also the shocks bottomed out before the bags were fully compressed (also do to the added drop of the PB arms)... so the old shock mounts were removed, new ones made, and installed on the bridge....now with the taken care of, since the 6L80E is so big and the new PB setup, we're gonna have to tunnel the cab (all this will be hidden under the center console), and make the hoop bigger on the PB crossmember.. ill get pics of that when the time comes...