|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-17-2009, 11:52 PM
|
#1 |
|
member
Join Date: Dec 2003
Location: Silver Spring Md.20901
Posts: 2,031
|
1967-68 front bumper guards.
I'm trying to locate the correct location to install the bumper guards. Does anyone have the factory location measurements or pictures of trucks with them installed. Any help is appreciated. Thanks
John
__________________
1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide |
|
|
|
11-18-2009, 12:00 AM
|
#2 |
|
Roadtrip!
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,717
|
Re: 1967-68 front bumper guards.
I have seen quite a few in both locations. Centered under the turn signals, and over the bumper bolts. I believe either way is acceptable.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
|
|
|
|
11-18-2009, 12:38 AM
|
#3 |
|
Account Suspended
Join Date: Nov 2008
Location: Prunedale California
Posts: 782
|
Re: 1967-68 front bumper guards.
I have a couple of pics of my 68 CST with the front guards still on it, hope this helps
Last edited by Puropedo; 02-25-2011 at 02:02 PM. |
|
|
|
|
11-18-2009, 08:29 AM
|
#4 |
|
trucks72
Join Date: Jul 2002
Location: Crossville
Posts: 315
|
Re: 1967-68 front bumper guards.
The pictures are the factory place for those. But if you put them on a 69-72 the turn signal light is in the way. So they get put where the 69-72 bumper guard is suppost to go. Over the center bumper bolt holes.
|
|
|
|
|
11-18-2009, 08:54 AM
|
#5 | |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,861
|
Re: 1967-68 front bumper guards.
Quote:
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
|
11-18-2009, 08:10 PM
|
#6 |
|
Currently Blazerless
Join Date: Apr 2000
Location: St. Joseph Mo.
Posts: 4,826
|
Re: 1967-68 front bumper guards.
John, here are the ones on my 68, I used the instructions that came with the NOS set when I put them on. They are 9" out from the inside set of bumper bolts and 8.25" inward of the outside bumper brace bolts..these measurements are from center of bolt to center of guard. Hope this helps
__________________
1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C |
|
|
|
|
11-19-2009, 02:25 AM
|
#7 |
|
member
Join Date: Dec 2003
Location: Silver Spring Md.20901
Posts: 2,031
|
Re: 1967-68 front bumper guards.
Thanks for everyone who took the time to help me out! Especally you Tim.
John
__________________
1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
