Rear seat mounts question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hertzdaddy · 12-04-2009, 10:32 AM

I have what I think are the original rear seat mounts for my 73 Jimmy. One set is longer than the other. The seat was narrowed to fit inside the mini-tub and now I have to bolt it back into the bed. Since the brackets were removed at some point I'm trying to figure out where they attach. It looks like the longer set should go on the back of the seat but I'm not positive. It may go on the front in order to get some more rearward lean to the seat. Does anyone know for sure?

Thanks.

Jonboy · 12-04-2009, 01:36 PM

I think the longer ones go on the front, to get the seat to lean back. It's been a while since I have paid attention to the fixed rear seat in a Blazer, though. I might still have the one out of my 77 in storage, don't remember right off hand.

scrool down to the pics towards the bottom: http://67-72chevytrucks.com/vboard/s...d.php?t=361288

Damien · 12-06-2009, 02:02 AM

The front brackets are taller then the rears so the seat tilts rearward.

tvblazer78 · 12-06-2009, 10:50 AM

They look to be bigger in the front..

Hertzdaddy · 12-07-2009, 10:34 AM

I put the long ones up front. Seems to be right.

Thanks everyone.

tvblazer78 · 12-07-2009, 02:04 PM

Thats what we are here for..

12-04-2009, 10:32 AM	#1
Hertzdaddy Registered User Join Date: Oct 2008 Location: Montpelier, VA Posts: 315	Rear seat mounts question I have what I think are the original rear seat mounts for my 73 Jimmy. One set is longer than the other. The seat was narrowed to fit inside the mini-tub and now I have to bolt it back into the bed. Since the brackets were removed at some point I'm trying to figure out where they attach. It looks like the longer set should go on the back of the seat but I'm not positive. It may go on the front in order to get some more rearward lean to the seat. Does anyone know for sure? Thanks.

12-04-2009, 01:36 PM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Rear seat mounts question I think the longer ones go on the front, to get the seat to lean back. It's been a while since I have paid attention to the fixed rear seat in a Blazer, though. I might still have the one out of my 77 in storage, don't remember right off hand. scrool down to the pics towards the bottom: http://67-72chevytrucks.com/vboard/s...d.php?t=361288 Last edited by Jonboy; 12-04-2009 at 01:37 PM.

12-06-2009, 02:02 AM	#3
Damien Registered User Join Date: Mar 2007 Location: Farmington, MN Posts: 928	Re: Rear seat mounts question The front brackets are taller then the rears so the seat tilts rearward. __________________ I can still count my vehicles on two... wait three hands.

12-06-2009, 10:50 AM	#4
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Rear seat mounts question They look to be bigger in the front.. Attached Images __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

12-07-2009, 10:34 AM	#5
Hertzdaddy Registered User Join Date: Oct 2008 Location: Montpelier, VA Posts: 315	Re: Rear seat mounts question I put the long ones up front. Seems to be right. Thanks everyone.

12-07-2009, 02:04 PM	#6
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Rear seat mounts question Thats what we are here for.. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.