#1 Essential Garage Tool - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shyguy · 12-18-2009, 09:45 PM

I sure wish I had an insulated and heated garage.

A few days ago I gave my son the new torpedo kerosene heater I bought a while back.

His garage is larger than mine and he works in it more often.

I have mine insulated up to 10 ft, but need to close off the upper part.

I did manage to get it cleaned out and straighened up enough to be able to put my '71 C-10 in it a few days ago.

Hopefully after the holidays I will be able to start working on it.

**too much stuff** · 12-18-2009, 11:57 PM

Sure enjoying my second year with a heated garage. Should have done it years ago!!! So now that you almost have heat, i assume your projects will get done this winter???

Yeah right, me too!

12-18-2009, 11:57 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,706	Re: #1 Essential Garage Tool Sure enjoying my second year with a heated garage. Should have done it years ago!!! So now that you almost have heat, i assume your projects will get done this winter??? Yeah right, me too! __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-18-2009, 09:45 PM	#1
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: #1 Essential Garage Tool I sure wish I had an insulated and heated garage. A few days ago I gave my son the new torpedo kerosene heater I bought a while back. His garage is larger than mine and he works in it more often. I have mine insulated up to 10 ft, but need to close off the upper part. I did manage to get it cleaned out and straighened up enough to be able to put my '71 C-10 in it a few days ago. Hopefully after the holidays I will be able to start working on it. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.