Quote:
Originally Posted by OrrieG
I was running the stock 6 cylinder radiator with a shroud and had no problems with my 283 (cam, 4bbl). This go around I picked up a larger radiator out of a 57 big truck, It is 1" thicker (3" total) a a little wider and a little taller. I am going to run it with the same shroud. Engine this time is a 350 but with air so I will have a condenser. The factory v8's had sheet metal that moved the radiator about 4-5" behind the support and closer to the engine. I did not move mine. I figure if I have problems I will add an electric fan to it I have lots of room.
|
thanks everyone
i will get all of the engine swap work leading up to rad done first!