dodge steelies - The 1947 - Present Chevrolet & GMC Truck Message Board Network

silvervic99stang · 02-04-2010, 09:45 PM

DODGE 1500 PICKUP 02-08 20" BLACK STEEL WHEELS ok will these fit the 73-87 chevy bolt pattern? i like the way these wheels look, and where can i find the for a decent price

**N2TRUX** · 02-04-2010, 09:52 PM

No they will not fit. It's a different bolt pattern so you will need to modify the wheel or run an adapter.

silvervic99stang · 02-04-2010, 10:23 PM

is there another steel wheel in a 20 that will fit this bolt pattern?

oldblue1968chevy · 02-04-2010, 11:19 PM

17 inch toyota FJ, there 6 lug, tcb has a set they look good!!!

**N2TRUX** · 02-05-2010, 12:46 AM

Quote:

Originally Posted by oldblue1968chevy

17 inch toyota FJ, there 6 lug, tcb has a set they look good!!!

Those are 6 lug, and he is asking about 5 lug.

What exactly are you after, a cheap 20 or a steel wheel?

franky69c10 · 02-05-2010, 03:28 AM

what's the bolt pattern on them anyways and where can u find a adapter 2 make these work

70scrapper · 02-05-2010, 04:28 AM

there 5 on 5 1/2 i was looking at getting some too, maybe an adapter would work but not to sure on how safe they are i already broke spacers before idk how the adapters would hold up.

70scrapper · 02-05-2010, 04:30 AM

o ya go to www.finishlinewheels.com and look under 07 dodge 1500 i think there like $95 apiece

silvervic99stang · 02-05-2010, 07:17 AM

i like the steel wheel look it fill real well, i looked in finishlinewheels and the bolt pattern said 5X5.5 is that not the same as 5 x 5 1/2

Tx Firefighter · 02-05-2010, 07:48 AM

Your GM truck bolt pattern is 5 on 5.

**N2TRUX** · 02-05-2010, 09:25 AM

Quote:

Originally Posted by silvervic99stang

i like the steel wheel look it fill real well, i looked in finishlinewheels and the bolt pattern said 5X5.5 is that not the same as 5 x 5 1/2

Yes, 5x5.5 or 5x51/2" are the same thing. As Tx Firefighter pointed out, "Your GM truck bolt pattern is 5 on 5. ". You can have the wheels redrilled, your axles replaced or redrilled, or run adapters. I'm sure there might be another way, but they WILL NOT bolt up as they are.

silvervic99stang · 02-05-2010, 09:34 AM

Oh ok I see. Just did not pay attention lol. Thanks.

**N2TRUX** · 02-05-2010, 09:41 AM

There was a guy in the 67-72 forum that was going to run a set. I "think" he had planned to use adapters, but that didn't work out because he had clearence issues with his stepside bed.

Don't give up if you really want them.They are a clean looking wheel. I think he bought his off of eBay and got them fairly cheap.

silvervic99stang · 02-05-2010, 06:38 PM

ok so i found this site that sell adapters what will the chevy bolt pattern be in metric? is this correct chevy 5x120.7 to dodge 5x139.

I doubled checked it its 5 X 127. To 5 X 139.
Please correct me if I'm wrong.

oldblue1968chevy · 02-05-2010, 07:19 PM

let us know how much $ ya get in it completed id like a set

hows the safety factor on adaptors? whats the total look like tires wheels adaptors

nickp51chevy · 02-05-2010, 07:43 PM

Check out sgtusmc's truck. He has the 20's for a Dodge.
He had to use adapters for them.

http://67-72chevytrucks.com/vboard/s...&postcount=156

Tx Firefighter · 02-05-2010, 10:57 PM

Just remember that an inch equals 25.2 millimeters when converting anything to metric.

NZSquare · 02-06-2010, 06:00 PM

I ordered a set of these things and should be picking them up next week (on the slow boat from the States to New Zealand).

I got them from a guy in texas called Novus Wheels for $190 for the set (from Ebay), I plan on getting them redrilled and powdercoated.
The offset from what I can tell is +20 vs +10 for the stock rallye on a c10. I believe they are around 5.75" BS, if anyone knows different Id be keen to know. Ill be running 255/35/20 all round, Ill let you know in a couple of weeks if and how they fit.

64shortc10 · 02-06-2010, 06:33 PM

They look kinda cool with white walls on the 20 inch steelies!

tcb-1 · 02-06-2010, 06:45 PM

^^^^ now that's s i c k!!

NZSquare · 02-06-2010, 06:47 PM

Yeah that looks cool, I was planning on getting my tires striped white aswell.

franky69c10 · 02-06-2010, 07:01 PM

64shortc10 r u using any adapter 2 run those steelies where can i find sum i wanna pick up a set steelies real soon 4 my 69

jmedero · 02-06-2010, 09:29 PM

Omg!

GRIMSS · 02-07-2010, 12:18 AM

Quote:

Originally Posted by franky69c10

64shortc10 r u using any adapter 2 run those steelies where can i find sum i wanna pick up a set steelies real soon 4 my 69

This is the guy that I got mine from. Mine went from s-10 to dodge and they added 2" per side.

http://www.wheeladapter.com/index.php

**wancosc356** · 02-07-2010, 12:24 AM

Quote:

Originally Posted by tcb-1

^^^^ now that's s i c k!!

Agreed!

02-04-2010, 09:45 PM	#1
silvervic99stang Registered User Join Date: Oct 2008 Location: Beckville TX. Posts: 65	dodge steelies DODGE 1500 PICKUP 02-08 20" BLACK STEEL WHEELS ok will these fit the 73-87 chevy bolt pattern? i like the way these wheels look, and where can i find the for a decent price

02-04-2010, 09:52 PM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: dodge steelies No they will not fit. It's a different bolt pattern so you will need to modify the wheel or run an adapter. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-04-2010, 10:23 PM	#3
silvervic99stang Registered User Join Date: Oct 2008 Location: Beckville TX. Posts: 65	Re: dodge steelies is there another steel wheel in a 20 that will fit this bolt pattern?

02-04-2010, 11:19 PM	#4
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: dodge steelies 17 inch toyota FJ, there 6 lug, tcb has a set they look good!!! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

02-05-2010, 03:28 AM	#6
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: dodge steelies what's the bolt pattern on them anyways and where can u find a adapter 2 make these work __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

02-05-2010, 04:28 AM	#7
70scrapper Registered User Join Date: Mar 2008 Location: Redding CA Posts: 18	Re: dodge steelies there 5 on 5 1/2 i was looking at getting some too, maybe an adapter would work but not to sure on how safe they are i already broke spacers before idk how the adapters would hold up.

02-05-2010, 04:30 AM	#8
70scrapper Registered User Join Date: Mar 2008 Location: Redding CA Posts: 18	Re: dodge steelies o ya go to www.finishlinewheels.com and look under 07 dodge 1500 i think there like $95 apiece

02-05-2010, 07:17 AM	#9
silvervic99stang Registered User Join Date: Oct 2008 Location: Beckville TX. Posts: 65	Re: dodge steelies i like the steel wheel look it fill real well, i looked in finishlinewheels and the bolt pattern said 5X5.5 is that not the same as 5 x 5 1/2 Last edited by silvervic99stang; 02-05-2010 at 07:35 AM.

02-05-2010, 07:48 AM	#10
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: dodge steelies Your GM truck bolt pattern is 5 on 5. __________________ I'm on the Instagram- @Gearhead_Kevin

02-05-2010, 09:34 AM	#12
silvervic99stang Registered User Join Date: Oct 2008 Location: Beckville TX. Posts: 65	Re: dodge steelies Oh ok I see. Just did not pay attention lol. Thanks.

02-05-2010, 09:41 AM	#13
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: dodge steelies There was a guy in the 67-72 forum that was going to run a set. I "think" he had planned to use adapters, but that didn't work out because he had clearence issues with his stepside bed. Don't give up if you really want them.They are a clean looking wheel. I think he bought his off of eBay and got them fairly cheap. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-05-2010, 06:38 PM	#14
silvervic99stang Registered User Join Date: Oct 2008 Location: Beckville TX. Posts: 65	Re: dodge steelies ok so i found this site that sell adapters what will the chevy bolt pattern be in metric? is this correct chevy 5x120.7 to dodge 5x139. I doubled checked it its 5 X 127. To 5 X 139. Please correct me if I'm wrong. Last edited by silvervic99stang; 02-07-2010 at 08:30 PM.

02-05-2010, 07:19 PM	#15
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: dodge steelies let us know how much $ ya get in it completed id like a set hows the safety factor on adaptors? whats the total look like tires wheels adaptors __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

02-05-2010, 07:43 PM	#16
nickp51chevy Registered Chevy Owner Join Date: Aug 2008 Location: Snohomish, wa Posts: 1,557	Re: dodge steelies Check out sgtusmc's truck. He has the 20's for a Dodge. He had to use adapters for them. http://67-72chevytrucks.com/vboard/s...&postcount=156 __________________ Love is fleeting, but Chevy trucks are forever!!!! 1970 Chevy CST C10 long box 350/400 2008 Chevy Silverado short box 4x4 Had; 1951 Chevy short box 307/T5 1988 Chevy shot box 4x4 350/350 1971 Chevy C10 long box 4x4 350/350 1971 Chevy C20 long box 350/350 1971 Chevy C10 long box 350/350 Last edited by nickp51chevy; 02-05-2010 at 07:44 PM.

02-05-2010, 10:57 PM	#17
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: dodge steelies Just remember that an inch equals 25.2 millimeters when converting anything to metric. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

02-06-2010, 06:00 PM	#18
NZSquare Registered User Join Date: Oct 2008 Location: Queenstown Posts: 132	Re: dodge steelies I ordered a set of these things and should be picking them up next week (on the slow boat from the States to New Zealand). I got them from a guy in texas called Novus Wheels for $190 for the set (from Ebay), I plan on getting them redrilled and powdercoated. The offset from what I can tell is +20 vs +10 for the stock rallye on a c10. I believe they are around 5.75" BS, if anyone knows different Id be keen to know. Ill be running 255/35/20 all round, Ill let you know in a couple of weeks if and how they fit.

02-06-2010, 06:33 PM	#19
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: dodge steelies They look kinda cool with white walls on the 20 inch steelies! Attached Images

02-06-2010, 06:45 PM	#20
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: dodge steelies ^^^^ now that's s i c k!! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

02-06-2010, 06:47 PM	#21
NZSquare Registered User Join Date: Oct 2008 Location: Queenstown Posts: 132	Re: dodge steelies Yeah that looks cool, I was planning on getting my tires striped white aswell.

02-06-2010, 07:01 PM	#22
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: dodge steelies 64shortc10 r u using any adapter 2 run those steelies where can i find sum i wanna pick up a set steelies real soon 4 my 69 __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

02-06-2010, 09:29 PM	#23
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: dodge steelies Omg! __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.