02-14-2010, 01:35 PM | #1 |
Registered User
Join Date: Dec 2009
Location: diamond bar, calif.
Posts: 206
|
spindle question??
do any of you guys know if the '84 3/4 ton chevy front spindles are the same as the 1/2 ton spindles? i have 3/4 ton spindles and want run 1/2 tonrotors to get a 5 lug instead of the 8 lug i have. thanks guys.
__________________
'66 c10ish straight 292 power! |
02-14-2010, 04:15 PM | #2 |
STILL PLAYS WITH TRUX
Join Date: Nov 2002
Location: Melbourne, Fla.
Posts: 2,764
|
Re: spindle question??
Im not 100% sure of this but i think the 3/4 ton spindle has a larger axel shaft than a 1/2 ton this is why it will handle heavier loads.
|
02-14-2010, 05:20 PM | #3 |
dang its hot
Join Date: Nov 2006
Location: frankfort kentucky
Posts: 1,349
|
Re: spindle question??
ball joints are different....find a donor truck, change the spindles and lower control arms
|
02-14-2010, 05:53 PM | #4 |
Registered User
Join Date: Nov 2008
Location: Bako,CA
Posts: 64
|
Re: spindle question??
Buy a set of 3/4 ton drop spindles from early classic they are made to take the 5 lug rotors and use your existing a arms,ball joints and steering links...plus you get a 2 1/2" drop.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|