Suspension parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MOTHERTRUCKERS · 04-06-2003, 10:14 AM

All used checked for wear lower/upper a arms for 67-72 c-10 and c-20 25.00 each. All 67-72 c-10 spindles 25.00 each, c-20 35.00 each. Trailing arms 40.00 each, coil springs 10.00. 67-70 front backing plates 5.00 each. Tons of frame parts and frames, no 4x4 parts. e-mail for availibility and shipping quote

jayssunm · 04-18-2003, 02:03 AM

Have any 5 lug axles for a 67 rear end? Or have inexpensive suggestions to convert to 5 from 6 lug?

MOTHERTRUCKERS · 04-18-2003, 06:08 AM

Yes we have axles or complete rearends but shipping to Ca is a killer. The cheapest way is pulling axles at bone yards or if you can't find them redrilling yours for 5 lug.

71custominworks · 04-18-2003, 01:43 PM

Needing 5-lug rear axle for my 71 1/2 ton. How much to 66762?

MOTHERTRUCKERS · 04-19-2003, 07:39 AM

Used axles 30.00 each, new 110.00 each, shipping guess 25.00.

pat · 04-23-2003, 05:20 PM

Do you have any dropped spindles or front drop springs?

MOTHERTRUCKERS · 04-23-2003, 05:53 PM

Yes we carry WESTERN drop spindles and EIBACH coils in our online catalog.

HotRod929 · 04-23-2003, 06:46 PM

Do you have any drop rear leaf springs???

Thanks
HotRod

Iron-Butt · 05-02-2003, 07:33 PM

are the western drop spindles good?

MOTHERTRUCKERS · 05-03-2003, 06:51 AM

WESTERN is the highest quality forged spindle on the market. They are a direct bolt in with no balljoint or tierod changes or alignment needed and converts your truck to disc brakes with a 2 1/2" drop. They carry a lifetime warranty.

john j · 05-03-2003, 07:15 AM

Has anyone "left" any 55-58 mono leafs there?

MOTHERTRUCKERS · 05-03-2003, 09:31 AM

No but we have new ones.

john j · 05-03-2003, 10:27 AM

Sorry mother i thought you only dealt in 67-72 stuff. When the front axel gets here i will be ordering a set of mono leafs. Thanks johnj

MOTHERTRUCKERS · 05-03-2003, 09:39 PM

No problem we have parts for 41-72 just not all of them in our catalog yet.

john j · 05-04-2003, 06:08 PM

Ok i just finished dropping the front axel and springs out. The pins a screw in type, top and bottom. With the new mono leafs will i use the same screw in type or just a regular pin? Also what about the top mount? Will i have to change to a new type of bushing? The back seem to just have a bolt type of pin it it. johnj

04-06-2003, 10:14 AM	#1
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Suspension parts for sale All used checked for wear lower/upper a arms for 67-72 c-10 and c-20 25.00 each. All 67-72 c-10 spindles 25.00 each, c-20 35.00 each. Trailing arms 40.00 each, coil springs 10.00. 67-70 front backing plates 5.00 each. Tons of frame parts and frames, no 4x4 parts. e-mail for availibility and shipping quote __________________ Rest in Peace Ed. Thanks for all the good times.

04-18-2003, 02:03 AM	#2
jayssunm Registered User Join Date: Jan 2003 Location: San Diego, CA Posts: 98	Have any 5 lug axles for a 67 rear end? Or have inexpensive suggestions to convert to 5 from 6 lug? __________________ 67 Fleetside Shortie, small window, slip & slide tranny Upgrades--small block, tilt column, disc 5 lug conversion (front and rear), Future Projects--suburban gas tank under the bed, rear roll pan, better gas mileage (currently about 6-10 MPG)

04-18-2003, 06:08 AM	#3
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Yes we have axles or complete rearends but shipping to Ca is a killer. The cheapest way is pulling axles at bone yards or if you can't find them redrilling yours for 5 lug. __________________ Rest in Peace Ed. Thanks for all the good times.

04-19-2003, 07:39 AM	#5
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Used axles 30.00 each, new 110.00 each, shipping guess 25.00. __________________ Rest in Peace Ed. Thanks for all the good times.

04-23-2003, 05:20 PM	#6
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	Do you have any dropped spindles or front drop springs? __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

04-18-2003, 01:43 PM	#4
71custominworks Junior Member Join Date: Nov 2002 Location: Columbus, KS Posts: 83	Needing 5-lug rear axle for my 71 1/2 ton. How much to 66762?

04-23-2003, 05:53 PM	#7
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Yes we carry WESTERN drop spindles and EIBACH coils in our online catalog. __________________ Rest in Peace Ed. Thanks for all the good times.

04-23-2003, 06:46 PM	#8
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	Do you have any drop rear leaf springs??? Thanks HotRod __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

05-02-2003, 07:33 PM	#9
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	are the western drop spindles good? __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

05-03-2003, 06:51 AM	#10
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	WESTERN is the highest quality forged spindle on the market. They are a direct bolt in with no balljoint or tierod changes or alignment needed and converts your truck to disc brakes with a 2 1/2" drop. They carry a lifetime warranty. __________________ Rest in Peace Ed. Thanks for all the good times.

05-03-2003, 07:15 AM	#11
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	Has anyone "left" any 55-58 mono leafs there? __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same

05-03-2003, 09:31 AM	#12
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	No but we have new ones. __________________ Rest in Peace Ed. Thanks for all the good times.

05-03-2003, 10:27 AM	#13
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	Sorry mother i thought you only dealt in 67-72 stuff. When the front axel gets here i will be ordering a set of mono leafs. Thanks johnj __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same

05-03-2003, 09:39 PM	#14
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	No problem we have parts for 41-72 just not all of them in our catalog yet. __________________ Rest in Peace Ed. Thanks for all the good times.

05-04-2003, 06:08 PM	#15
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	Ok i just finished dropping the front axel and springs out. The pins a screw in type, top and bottom. With the new mono leafs will i use the same screw in type or just a regular pin? Also what about the top mount? Will i have to change to a new type of bushing? The back seem to just have a bolt type of pin it it. johnj __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.