Electric Rear View Mirror - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1-PU70 · 02-17-2010, 05:52 PM

I just put a new rear view mirror in my 70. It had the one that is screwed to the roof but the new one is glued to the windshield. It has mape lights, compas, auto dim and outside temp. I need some ideas for running the wires from the mirror. I know I dont want to run the wires in the rubber seal of the windshield. I would like to run the wires into the roof where the old mirror was but need something to cover the hole . So anyone have any ideas?
Thanks

**71blksuper4x4** · 02-17-2010, 05:56 PM

Can you make a plastic piece with 3 holes drilled into the existing holes for the original mirror? Wouldn't be too hard. You will need some type of wire loom cover to cover the wires as it will be a hard thing to look at without something there hiding some of the wiring. Trevor

1-PU70 · 02-17-2010, 06:08 PM

The wiring will be covered with some kind of black loom, so it wont be to noticeable but the hole where it goes into the roof needs to be covered.

02-17-2010, 05:52 PM	#1
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Electric Rear View Mirror I just put a new rear view mirror in my 70. It had the one that is screwed to the roof but the new one is glued to the windshield. It has mape lights, compas, auto dim and outside temp. I need some ideas for running the wires from the mirror. I know I dont want to run the wires in the rubber seal of the windshield. I would like to run the wires into the roof where the old mirror was but need something to cover the hole . So anyone have any ideas? Thanks __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

02-17-2010, 05:56 PM	#2
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Electric Rear View Mirror Can you make a plastic piece with 3 holes drilled into the existing holes for the original mirror? Wouldn't be too hard. You will need some type of wire loom cover to cover the wires as it will be a hard thing to look at without something there hiding some of the wiring. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-17-2010, 06:08 PM	#3
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Re: Electric Rear View Mirror The wiring will be covered with some kind of black loom, so it wont be to noticeable but the hole where it goes into the roof needs to be covered. __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.