Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!

[Hottrucks]

also I added a 1" block but you have to notice that the bar is backwards from stock (you can see stock the frame hanger in the pic) I fabbed up a quick mount on the outside of the frame on the other side ..mt P bar is 42" long and works like a charm if you look you can see where he weld is glueing 2 bars together to make 1 new bar long enough...adjustable is easy to install but why spend $$ for something adjustable that you never adjust??...I flipped the stock shock mounts so shock travel is great...once my wheels are here I will locate the E brake cable hanger to clear the wheel...

I will say this was the best $$$ I have spent on a mod total cost...$100 and a few hours labor and fab work

I doing the motor transplant now I'm sure that will be $$ well spent but not nearly as easy

[383Chevy]

85' chevy stepside,33x18.5x15 M&H and she aint tubbed either

[Hottrucks]

ok here how it goes when you have a budget ( I'm going to do a build on it but you guys are getting the sneak peak!!!) keep in mind I could have spent more time on cleaning but I want them on the truck this weekend ( its going to be near 80* for the first time....time to cruz)

I think its self explanitory.... cost to for widening was stupid cheap compaired to a new wheel..your going to have to follow my build and wait for prices,names and address's but I can say its not me...tires will go on tomorrow as soon as the paint has time to dry a bit after another couple coats..

to bad I can't post pics on this freak'n page WTF!!!!!!!

5 min later same pics no problem??

[Hottrucks]

CAN I hang with you guys now...PLEASE!!!

[midevil1]

Originally Posted by Hottrucks

CAN I hang with you guys now...PLEASE!!!

If you lose the "Service Truck" rear bumper.....Yes you can. LOL. Lookin good.

[Hottrucks]

Originally Posted by midevil1

If you lose the "Service Truck" rear bumper.....Yes you can. LOL. Lookin good.

I use it for weight transfer...(read as) to tranfer my fat Azz from the ground to the truck!!
LMAO....

[drag_72]

dood really? i mean if thats what you like thats cool? but you need to tubbed it and lower it just my opinion

[Hottrucks]

Originally Posted by drag_72

dood really? i mean if thats what you like thats cool? but you need to tubbed it and lower it just my opinion

Shhh don't tell him but someone put his tubs on the outside of his bed



but that would look kool with a straight axle under it !!!!

[383Chevy]

Originally Posted by Hottrucks

Shhh don't tell him but someone put his tubs on the outside of his bed



but that would look kool with a straight axle under it !!!!

Don't hate,it was a one day thing i took em off

[1Bad62Pro/Street]

If I had that year and body style truck she would look like this....
Well...... I if I had the money that is...
http://www.eurodragster.com/news/fea...up/default.asp

[Hottrucks]

Originally Posted by 383Chevy

Don't hate,it was a one day thing i took em off

trust me theres no hate I would put some 4" rims on it up front spray the rear quarters with Pam and take it to the track for a good ass woop'n

Highboy's where all the rage back in the day..its a very retro look thats why I said put a straight axle on it!!! and a big 671 out of the hood!!

[Hottrucks]

dam you ! bad I din't hit enter fast enough!!l LMAO...I'd love to be blown!!

[drag_72]

short lil burnout... didnt wanna hit the car parked in the middle of the damn road.. bad quality also... it was taken off of a buddies phone

[team39763]

Where do you guys get the material for the bed floor? I'm wanting to do my bed, but our local places want $100 for a 24X40" piece of aluminum sheet(steel isn't much cheaper). I considered doing the bed floor with lexan since it's $58 for 26X72, but I don't think that would work too good.

[djracer]

Originally Posted by team39763

Where do you guys get the material for the bed floor? I'm wanting to do my bed, but our local places want $100 for a 24X40" piece of aluminum sheet(steel isn't much cheaper). I considered doing the bed floor with lexan since it's $58 for 26X72, but I don't think that would work too good.

I'm doing the fake wood and stainless strips in my sons truck.

[fiddy9apache]

Originally Posted by djracer

I'm doing the fake wood and stainless strips in my sons truck.

i kinda did the same with a piece of 3/4in treated plywood and the layed fence wood over it and stained it. its hinged so i can get under it to get to my battery and adj coil overs when that time comes.

[prostreetC-10]

Call me a butcher cuz I like the meats!!!

[Hottrucks]

hey PSC10 are those radial's....I noticed that my new sneakers make my truck wonder pretty badly..I was woundering if it was because of the radial fronts and bias back or wether it was due to low air on the rear??

[djracer]

Originally Posted by Hottrucks

hey PSC10 are those radial's....I noticed that my new sneakers make my truck wonder pretty badly..I was woundering if it was because of the radial fronts and bias back or wether it was due to low air on the rear??

His are bias. How low are you running them on the street?

[Hottrucks]

20/25 lbs the tires are 31x15.5 15 mickey thompsons

[prostreetC-10]

Originally Posted by Hottrucks

hey PSC10 are those radial's....I noticed that my new sneakers make my truck wonder pretty badly..I was woundering if it was because of the radial fronts and bias back or wether it was due to low air on the rear??

They are bias ply sportsman. You are actually running too much air. I believe the tires are only rated at 20 psi max which would be under max load rating. When I ran them at 18, they got worse. It causes the tire to crown real bad. I run 16 in mine and it's about what the truck likes. They are going to feel like they are walking on you no matter what pressure you run. I am on the hunt for either M/T radials or Hoosier radials. I have talked to a lot of people that started with the sportsmans and switched to radials. They say you won't believe the differences. It's not so much that you are running radials with bias as the fact that the bias are so wide and not much of a sidewall. You really have to choose the "look" or ride quality. I chose the look.

[djracer]

read on the side of the tire and I would run max pressure or close to it when not at the track then let them down.

20 is not enough on the street. I didn't have a problem when I ran sportsman pro's and radials.

[Hottrucks]

thanx I guess I'll air them up...I hate to the foot print is even and I dont want to wear the middles out anymore than I do already.....

[bigsnookmaster]

Here's a few of mine:

[Hottrucks]

hey Greg I'd love to check out your truck I'm going to be in St Pete next week( wednesday)..theres a show in Oldsmar saturday (17th) I'm going to check out..the rest of the time I'll be at the Under Tow,Jimmy B's or some where on Gulf Blvd...hiding behind a beer..yea I spend alot of time in your neck of the woods......