|
02-26-2010, 02:57 PM
|
#1 |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
20 years later
After being parked at a ranch in NV for 20+ years this project is headed for WA.
It ran when it was parked and has a 427cid 425HP L-72 under the hood. Photos attached (I hope)
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973  I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010 
|
|
|
|
02-26-2010, 04:14 PM
|
#2 |
|
Registered User
Join Date: Sep 2008
Location: Bailey, NC
Posts: 2,462
|
Re: 20 years later
Nice find! What's the plans?
__________________
Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT |
|
|
|
|
02-26-2010, 07:30 PM
|
#3 |
|
I have car A.D.D.
Join Date: Feb 2009
Location: Greeley, Northern Colorado
Posts: 4,147
|
Re: 20 years later
Looks like I very nice start. Give us the story. How'd you find it? What are you gonna do with it? Yadda Yadda Yadda.
__________________
-Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. |
|
|
|
|
02-26-2010, 09:14 PM
|
#4 |
|
Registered User
Join Date: May 2008
Location: Waukesha, WI
Posts: 904
|
Re: 20 years later
Looks like its got a dana 60 under the front
__________________
70 stepside 76 blazer 86 Silverado 20 Max Trailering 6.2 Crew 71 Nova SS My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=363634 |
|
|
|
|
02-26-2010, 10:14 PM
|
#5 | |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
Re: 20 years later
Quote:
What I don't know is do I lift it a little and put big tires or do I street it and lower it even thought it is 4X4. I havent decied on that yet.
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010
|
|
|
|
|
|
02-26-2010, 10:15 PM
|
#6 | |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
Re: 20 years later
Quote:
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010
|
|
|
|
|
|
02-26-2010, 10:21 PM
|
#7 |
|
Registered User
Join Date: May 2009
Location: Loganville, Ga.
Posts: 1,408
|
Re: 20 years later
Great find.....The 427 - 425 hp motors are getting hard to find.
__________________
My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl |
|
|
|
|
02-26-2010, 10:24 PM
|
#8 | |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
Re: 20 years later
Quote:
This truck belonged to a good friend. He is a batchler and the owner of 3 ranches in NV and CA. About 20 years ago he went out and bought a new Ford and just parked this truck in the back yard. Prior to that he bought the truck with this motor in it. He took out the motor and changed the pistons to 10:1 because gas had been degraded so much it would no longer run on pump gas At the same time he put in new bearings and did a valve job. That was about it. Same cam and all the other goodies it came from the factory with are still in the motor. One day I was down visiting and I asked him what he was going to do with that truck. I know the history and had even driven the truck a few times years ago. His answer " I don't know, you want it?" "If you think you can do something with it take it." That was last Nov and in Feb I took the trailer down and he helped me load it up, signed off the title and it is now in WA in my shop. That is the story and all it cost me was the fuel to drive down and back.
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010
|
|
|
|
|
|
02-26-2010, 10:24 PM
|
#9 |
|
Easy Rider
 
Join Date: Feb 2010
Location: Arlington, TN.
Posts: 21
|
Re: 20 years later
Very nice, rock on.
 I'm currently doing a frame off on my 85. Start a build thread on it so we can watch the progress.
__________________
Jeremy  '85 GMC swb (project) 07 Harley  '09 Ford Escape ( the family car) |
|
|
|
|
02-26-2010, 11:09 PM
|
#10 |
|
Registered User
Join Date: Oct 2009
Location: Jay, Fl
Posts: 126
|
Re: 20 years later
" I am looking at finding a next genaration (89-98) stepside bed for it."
Please please please don't! |
|
|
|
|
02-26-2010, 11:11 PM
|
#11 |
|
Registered User
Join Date: Oct 2009
Location: Jay, Fl
Posts: 126
|
Re: 20 years later
Nice truck though. Should be fun!
|
|
|
|
|
02-26-2010, 11:39 PM
|
#12 |
|
I have car A.D.D.
Join Date: Feb 2009
Location: Greeley, Northern Colorado
Posts: 4,147
|
Re: 20 years later
That's a great story! Good buddy. And great deal on your behalf. I think a lowered 4x4 would be a cool change.
__________________
-Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. |
|
|
|
|
02-27-2010, 12:49 AM
|
#13 | |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
Re: 20 years later
Quote:
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010
|
|
|
|
|
|
02-27-2010, 01:25 AM
|
#14 |
|
I have car A.D.D.
Join Date: Feb 2009
Location: Greeley, Northern Colorado
Posts: 4,147
|
Re: 20 years later
And hey, 4 tires grabbin' pavement will only help with transferring that power.
__________________
-Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. |
|
|
|
|
02-27-2010, 10:34 PM
|
#15 | |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
Re: 20 years later
Quote:
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010
|
|
|
|
|
|
02-27-2010, 10:40 PM
|
#16 |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
Re: 20 years later
I got her up on the lift today and got a good look at her underside. Found a TH350 and a NP205 transfer case. Not sure that TH350 is strong enough to hold this motor. Any tips on how to beef it up are sure welcome.
A lot of funky wiring from end to end. I think a new wire harness is in order. Also found the dash and instruments are toast. All cracked and broken plastic for the most part. It was hacked up to add a gauge at one time also.
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010
|
|
|
|
|
02-28-2010, 11:55 AM
|
#17 |
|
Registered User
Join Date: May 2008
Location: Waukesha, WI
Posts: 904
|
Re: 20 years later
Ah, I see now that its 6 lug and not 8. Please dont put the newer stepside bed on it, they just dont look right on an older truck.
__________________
70 stepside 76 blazer 86 Silverado 20 Max Trailering 6.2 Crew 71 Nova SS My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=363634 |
|
|
|
|
02-28-2010, 12:07 PM
|
#18 | |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
Re: 20 years later
Quote:
I thought it would look nice with the smoother lines. I will have to morph some photos in photoshop and see what it looks like before I buy one. If not I will still go stepside. the fleetside is just boring to me.
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010
|
|
|
|
|
|
02-28-2010, 12:28 PM
|
#19 |
|
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: 20 years later
What a great score. The price is unbeatable. I do agree a newer style bed wouldn't be my choice. However, it's your truck, do what you like. My thoughts are that the center piece will be under the hood. Who cares what bed you have when you have that 427. incredible!!
|
|
|
|
|
02-28-2010, 01:25 PM
|
#20 | |
|
Chevy Lover Till The End.
Join Date: Dec 2009
Location: Mascot TN.
Posts: 795
|
Re: 20 years later
Quote:
__________________
1969 Chevy SWB Big Block - Under the knife as of 12/26/2011 1989 Chevy Silverado, 4X4 - Daily Driver 1996 Chevy Suburban K1500 - 4-Wheeler, Campin Truck 1968 Chevrolet Impala Sport Coupe - 327/350hp, TH400, all original. Members I've met: BamaBaxter, My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=500359 |
|
|
|
|
|
02-28-2010, 05:15 PM
|
#21 | |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
Re: 20 years later
Quote:
When it comes time to find a bed the determining factor will be what I can find for a good price and how much work it will need.
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010
|
|
|
|
|
|
02-28-2010, 09:07 PM
|
#22 |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
Project Ranch Hand
Well Project Ranch Hand hit its first major snag today.
The plan was to pressurize the oil system and while the drill was turning the oil pump I was going to turn the motor over by hand so I could get to all the bolt on the flex plate prior to pulling the motor out. I took all the rockers off so no pressure on the camshaft first. Then took out the spark plugs....First bad sign....Rust on the end of two of the plugs. Squirted a bunch of penetrating oil in all the plug holes to give some protection to the cylinders. Now the moment of truth. Pumping the oil I had 50 pound of good pressure. When I tried to turn the crank is when I found the big problem...it won't tun over! Well I support the transmission and very carefully slid the motor out with the torque converter still attached to the flex plate since I could not get to 2/3 of the bolts. Okay it came out smooth and clean so I don't think I did any damage. A new torque Converter is on the play anyway and I will check out the flex plate or replace it also so no harm no foul I guess. Now it is time to get it on a motor stand and tare down the motor. I suspect it is rust in the block is the problem and that will require a line bore to clean it up and a new set of pistons A guess. Planed on a valve job also so when I get done I will have a good fresh motor. It will just take longer and co$t a bit more.
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010
|
|
|
|
|
03-02-2010, 12:22 AM
|
#23 |
|
Registered User
Join Date: Feb 2010
Location: Poulsbo, wa
Posts: 42
|
Re: 20 years later
More bad news:
The heads came off tonight and the #8 hole was not only sezed up tight but even had dirt on top of the piston. The inside of the head on that hole had rust scale that had fallen down on top of the piston. The ex valve had been ope all those years and the heat and cooling cycles had moved air in and out. The block will need to be bored out to clean it up but shold not be a problem. The other bad thing was one of the heads is not from this motor. It has a different casting number and when looked up it has a bigger combustion chamber by 2.1cc. That is if it was not properly matched when it was put on and I won't know that until I get the heads reworked. The motor was also to have a solid lifter cam in it, but nope a hyd cam was in it instead. I don't know the specs on that cam yet. In the end I will have a fine running 427 that is for sure but not an all original motor as I had hoped it would be.
__________________
07 Chev 2500HD Classic Project Ranch Hand, Hauling A$$ since 1973 I was told this Project had a L-72 427 425HP, It did not. It does have a 427 block and parts from various 427 motors. It will end up with a nice strong 454 in the end. It has not been run for 20+ years Frame up restoration started2/15/2010
|
|
|
|
|
03-02-2010, 10:04 AM
|
#24 |
|
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: 20 years later
Your doing something wrong if everything goes as planned.
|
|
|
|
|
03-02-2010, 02:45 PM
|
#25 |
|
Registered User
Join Date: Apr 2009
Location: Edmonton, Alberta
Posts: 279
|
Re: 20 years later
Another member on the board 85_praireboy has done the newer bed swap, http://67-72chevytrucks.com/vboard/s...d.php?t=371586 IMHO it looks pretty good, enough of the bodylines match up so that it doesnt look too unnatural. The new box would probably require some tweaking to look perfect but it could be done.
By the way sweet find!
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
