|
02-26-2010, 09:43 PM
|
#1 |
|
Registered User
Join Date: Apr 2008
Location: VA
Posts: 9
|
electrical
What size fusibl link is used from starter to alt. on a 85 k10?
|
|
|
|
02-27-2010, 10:41 AM
|
#2 |
|
One shot, one kill.
Join Date: Dec 2007
Location: Saratoga Springs NY
Posts: 859
|
Re: electrical
Short answer is 10ga. Make sure when you replace it\them that you have eliminated the cause of the short\failure first, then solder the replacements(s) in. Also solder the eyelets to the link and using a good heat shrink, cover the solder joints. jim
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shot  Jim or Paladin whichever you choose.
|
|
|
|
|
02-27-2010, 11:52 AM
|
#3 |
|
Registered User
Join Date: Apr 2008
Location: VA
Posts: 9
|
Re: electrical
What is the amp ratting of the fusible link and what gauge wire is that line to the alt..
14ga? Thanks Last edited by malgieri4; 02-27-2010 at 11:53 AM. |
|
|
|
|
02-27-2010, 12:03 PM
|
#4 |
|
One shot, one kill.
Join Date: Dec 2007
Location: Saratoga Springs NY
Posts: 859
|
Re: electrical
All of the wireing (red in color and attached to the alt or starter) under the hood is 10ga as are all of the fuse links.
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shot Jim or Paladin whichever you choose.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
