'68 C10 project for Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue68 · 05-01-2003, 11:11 AM

The decision has been made to sell my project. I'm starting the asking price at $4000. Here is a list of what's been done, started, undone and bought. Let's make a deal. It's a 1998 C-10 LWB.

700r4 tranny installed
U.S. Radiator 4core
1998 Chevy 350 (Z-71 truck) w/Comp Cams Extreme 4x4 roller cam #08-411-8 (not radical at all), Edelbrock Vortec Performer intake, Edelbrock 1405 (600cfm) carb w/Electric choke topped off with a K&N Filter. Check out http://www.sallee-chevrolet.com/Chev...e_4x4_350.html for a basis. New timing gear and chain and chrome cover too. The engine has not been rebuilt, just modded to run carbed. Serpentine setup.
Doug Thorley Tri-Y Headers.
1975 C-10 crossmember for Disc Brakes.
Vintage air, installed and removed. Compressor is gone, intended to use compressor on '98 engine.
Power steering.
Have windows, doors, front and rear glass rubber seals, felt, and runners.
Wheel vintique wheels (steel rally) 5 lug front 15x7 , 6 lug rear 15x8.
Carter electric fuel pump.
ACC Carpet (blue).
3 pt seat belts and center belt that work with....
'98 Chevy bench seat.
Oringinal bench seat, with new cover.
Spare Auto column out of unknow year chevy.
Kugel arm shift linkage so auto is shifted with original 3 in tree column.
Patch panels for inner/outer rockers, kick panel, and front pillar.
New chrome door sills.
Inside handle and cranks.
A/C dash controls.
Replaced core with oem core in good shape. With core mount hardware.
Replaced battery tray
Replaced Inner fenders
Poly graphite cab mounts.
Front sway bar from Early Classic.

There may be more, but these are the highlights that I can either think of or see on the truck. Thanks for your interest.

Todd.

Blue68 · 05-01-2003, 11:12 AM

another

Blue68 · 05-01-2003, 11:14 AM

again

Blue68 · 05-01-2003, 11:15 AM

helps with the pic

Blue68 · 05-01-2003, 11:15 AM

and one more

Blue68 · 05-01-2003, 11:16 AM

I'll try to borrow a digital camera and take more current photos for anyone interested.

Blue68 · 05-01-2003, 11:17 AM

forgot one

Blue68 · 05-01-2003, 12:46 PM

Oh yeah, make an offer too. Just be prepared to pick it up. It runs, but the front clip isn't well secured and the seat isn't bolted down.

Blue68 · 05-02-2003, 11:25 AM

Come on, 200 posts and no comment on price or anything? Is no one looking for a project?

Blue68 · 05-03-2003, 10:24 AM

ttt

jayssunm · 05-05-2003, 11:10 AM

Great looking truck! Would be interested if it were a shortbed. I really love a clean shortbed!

Good luck! Lots of great parts in her.

Blue68 · 05-06-2003, 11:21 PM

^^^^^

05-01-2003, 11:11 AM	#1
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	'68 C10 project for Sale The decision has been made to sell my project. I'm starting the asking price at $4000. Here is a list of what's been done, started, undone and bought. Let's make a deal. It's a 1998 C-10 LWB. 700r4 tranny installed U.S. Radiator 4core 1998 Chevy 350 (Z-71 truck) w/Comp Cams Extreme 4x4 roller cam #08-411-8 (not radical at all), Edelbrock Vortec Performer intake, Edelbrock 1405 (600cfm) carb w/Electric choke topped off with a K&N Filter. Check out http://www.sallee-chevrolet.com/Chev...e_4x4_350.html for a basis. New timing gear and chain and chrome cover too. The engine has not been rebuilt, just modded to run carbed. Serpentine setup. Doug Thorley Tri-Y Headers. 1975 C-10 crossmember for Disc Brakes. Vintage air, installed and removed. Compressor is gone, intended to use compressor on '98 engine. Power steering. Have windows, doors, front and rear glass rubber seals, felt, and runners. Wheel vintique wheels (steel rally) 5 lug front 15x7 , 6 lug rear 15x8. Carter electric fuel pump. ACC Carpet (blue). 3 pt seat belts and center belt that work with.... '98 Chevy bench seat. Oringinal bench seat, with new cover. Spare Auto column out of unknow year chevy. Kugel arm shift linkage so auto is shifted with original 3 in tree column. Patch panels for inner/outer rockers, kick panel, and front pillar. New chrome door sills. Inside handle and cranks. A/C dash controls. Replaced core with oem core in good shape. With core mount hardware. Replaced battery tray Replaced Inner fenders Poly graphite cab mounts. Front sway bar from Early Classic. There may be more, but these are the highlights that I can either think of or see on the truck. Thanks for your interest. Todd. Attached Images __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades. Last edited by Blue68; 05-12-2003 at 09:13 PM.

05-01-2003, 11:12 AM	#2
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	another Attached Images __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-01-2003, 11:14 AM	#3
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	again __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-01-2003, 11:15 AM	#4
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	helps with the pic Attached Images __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-01-2003, 11:15 AM	#5
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	and one more Attached Images __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-01-2003, 11:16 AM	#6
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	I'll try to borrow a digital camera and take more current photos for anyone interested. __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-01-2003, 11:17 AM	#7
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	forgot one Attached Images __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-01-2003, 12:46 PM	#8
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	Oh yeah, make an offer too. Just be prepared to pick it up. It runs, but the front clip isn't well secured and the seat isn't bolted down. __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades. Last edited by Blue68; 05-01-2003 at 04:31 PM.

05-02-2003, 11:25 AM	#9
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	Come on, 200 posts and no comment on price or anything? Is no one looking for a project? __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-03-2003, 10:24 AM	#10
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	ttt __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-05-2003, 11:10 AM	#11
jayssunm Registered User Join Date: Jan 2003 Location: San Diego, CA Posts: 98	Great looking truck! Would be interested if it were a shortbed. I really love a clean shortbed! Good luck! Lots of great parts in her. __________________ 67 Fleetside Shortie, small window, slip & slide tranny Upgrades--small block, tilt column, disc 5 lug conversion (front and rear), Future Projects--suburban gas tank under the bed, rear roll pan, better gas mileage (currently about 6-10 MPG)

05-06-2003, 11:21 PM	#12
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	^^^^^ __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.