Oil Problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wxman1 · 05-09-2003, 03:14 PM

I've noticed an oil stain on the side of the
intake manifold just below the carb on
both sides of the manifold. This has been
happening ever since I installed the
new Holley manifold. Has anyone else
had/seen this problem? Cure?

See link below:

[URL=http://mywebpages.comcast.net/wxgeek/p5090058.jpg[/URL]

Jim M.
Mt Juliet, TN

wxman1 · 05-09-2003, 03:17 PM

Sorry...link didn't quite work.

Try this:

http://mywebpages.comcast.net/wxgeek/p5090058.jpg

sneakysnake · 05-09-2003, 03:34 PM

Are you sure its oil and not fuel ?maybe running out around the butterfly, does the intake have the exaust byway that warms the intake may be discoloring your intake?

sneakysnake · 05-09-2003, 03:37 PM

pcv valve hose, blowby, bad fitting

Mike Culpepper · 05-09-2003, 03:37 PM

Check out this thread:

http://67-72chevytrucks.com/vboard/s...ntake+manifold

crazy4chevs · 05-09-2003, 04:44 PM

Try using silicone sealant on the center bolts on each side as Thats pretty comon.

cdowns · 05-09-2003, 07:37 PM

when installing intake manifold you MUST use thread sealer or you get an oil leak

05-09-2003, 03:14 PM	#1
wxman1 Senior Member Join Date: May 2002 Location: mt juliet, tennessee, usa Posts: 237	Oil Problem I've noticed an oil stain on the side of the intake manifold just below the carb on both sides of the manifold. This has been happening ever since I installed the new Holley manifold. Has anyone else had/seen this problem? Cure? See link below: [URL=http://mywebpages.comcast.net/wxgeek/p5090058.jpg[/URL] Jim M. Mt Juliet, TN

05-09-2003, 03:37 PM	#5
Mike Culpepper Red Join Date: Feb 2003 Location: Llano... Texas Hill Country Posts: 448	Check out this thread: http://67-72chevytrucks.com/vboard/s...ntake+manifold __________________ '72 Cheyenne LWB 350/350 "The sun don't shine on the same dog's ass all the time." - Catfish Hunter (commenting on why he was not able to pitch another perfect game).

05-09-2003, 04:44 PM	#6
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	Try using silicone sealant on the center bolts on each side as Thats pretty comon. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

05-09-2003, 07:37 PM	#7
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	when installing intake manifold you MUST use thread sealer or you get an oil leak __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-09-2003, 03:17 PM	#2
wxman1 Senior Member Join Date: May 2002 Location: mt juliet, tennessee, usa Posts: 237	Sorry...link didn't quite work. Try this: http://mywebpages.comcast.net/wxgeek/p5090058.jpg

05-09-2003, 03:34 PM	#3
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Are you sure its oil and not fuel ?maybe running out around the butterfly, does the intake have the exaust byway that warms the intake may be discoloring your intake?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.