Tightening Bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dabeers · 05-10-2003, 09:27 AM

I had to replace my timing chain and gears on my 402. My question is how tight should I tighten the bolts on the sprocket that goes on the camshaft? It seemed like they were real tight coming off, but I don't want to screw something up. Any help would be appreciated.

tom hand · 05-10-2003, 10:49 AM

http://www.2quicknovas.com/torque.html

dabeers · 05-10-2003, 11:14 AM

Thanks, that's exactly what I needed.

You guys still amaze me how you come up with stuff like this, and so quick!!!!

This site is a life saver.

05-10-2003, 09:27 AM	#1
dabeers Registered User Join Date: Apr 2003 Location: Syracuse, NE Posts: 33	Tightening Bolts I had to replace my timing chain and gears on my 402. My question is how tight should I tighten the bolts on the sprocket that goes on the camshaft? It seemed like they were real tight coming off, but I don't want to screw something up. Any help would be appreciated. __________________ '72 Chev 3/4 T Long Box Stepside

05-10-2003, 10:49 AM	#2
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	http://www.2quicknovas.com/torque.html __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

05-10-2003, 11:14 AM	#3
dabeers Registered User Join Date: Apr 2003 Location: Syracuse, NE Posts: 33	Thanks, that's exactly what I needed. You guys still amaze me how you come up with stuff like this, and so quick!!!! This site is a life saver. __________________ '72 Chev 3/4 T Long Box Stepside

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.