value of Eaton 3/4 locker - The 1947 - Present Chevrolet & GMC Truck Message Board Network

griesel72 · 03-17-2010, 01:18 PM

I have a Eaton 3/4 ton Locker out of a 68 truck that a guy wants to buy from me. What is the value of these? Thanks

Sinister · 03-17-2010, 02:01 PM

No idea on value, but I do know they are scarce.

griesel72 · 03-20-2010, 10:57 AM

Doese anyone have a range for me on pricing this?

thanks
David

Shaky · 03-20-2010, 03:04 PM

I believe the factory name for this is "no-spin". Maybe that will help you with googling it. I'm always on the lookout for one, but they're rarely around here...

griesel72 · 03-20-2010, 09:03 PM

Yeah, it is listed on the options sheet at a "no spin" , maybe someone on here knows what it is worth.
thanks
David

factorystock · 03-20-2010, 09:22 PM

It would depend on what ratio it is also. IMO, if its 4.11 complete pumpkin, it would easily be worth $150-250, if it is the 4.57, lucky to get $100.

72swb_327stroker_? · 03-20-2010, 09:24 PM

I would say anywhere between $350-650 depending on its condition.

I paid $150 from Bill for a regular 1/2 ton posi unit...I thought that was super cheap!
You can find these everywhere...

But yours is rare, so this should set the bar for your pricing.

Good luck!

vectorit · 03-20-2010, 09:35 PM

They are pretty scarce... But if I found one for my H052, and it was just a used one that I had no idea about. Truthfully, I'd only pay a scrap price for it if came straight out of a junk axle. Meaning that I would have no idea about if it actually worked correctly...
Good trading fodder though!

justcuz · 03-21-2010, 10:57 AM

If they are in good shape thay can go for 100 to 500 dollars. I would not pay more than 150 dollars for one. Why, because you can take a No-Spin (Detroit Locker) from a newer GM 14 bolt full floater and install it and 14 bolt axles. In doing so you get 30 spline axles and a cheaper locker. The 14 bolt detroit fits right into the HO52/72 carrier. The axles may need a slight trim, I've forgotten how much if any.

Most guys think these lockers for the old axle are worth gold. They really are not. The old axles have 17 splines and are not as strong as the 14 bolts axle with 30 splines. So don't let anybody BS you that these things are worth a ton of money. You can buy a brand new Detroit Locker for a 14 bolt for 350 dollars.

*sharpie1972* · 03-21-2010, 11:02 AM

I agree with Factorystock, gear ratio is an important factor if your selling complete. Some were even 5.14 ratio! $200-300 range seems to be pretty fair for one. Sharpie

**special-K** · 03-21-2010, 11:34 PM

I`ve never paid more than $125.

03-17-2010, 01:18 PM	#1
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	value of Eaton 3/4 locker I have a Eaton 3/4 ton Locker out of a 68 truck that a guy wants to buy from me. What is the value of these? Thanks __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

03-17-2010, 02:01 PM	#2
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: value of Eaton 3/4 locker No idea on value, but I do know they are scarce. __________________ Beat it to fit, Paint it to match...

03-20-2010, 10:57 AM	#3
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Re: value of Eaton 3/4 locker Doese anyone have a range for me on pricing this? thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

03-20-2010, 03:04 PM	#4
Shaky Six in a row makes it go... Join Date: Mar 2009 Location: Vacationland: Maine Posts: 1,346	Re: value of Eaton 3/4 locker I believe the factory name for this is "no-spin". Maybe that will help you with googling it. I'm always on the lookout for one, but they're rarely around here... __________________ 67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce

03-20-2010, 09:03 PM	#5
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Re: value of Eaton 3/4 locker Yeah, it is listed on the options sheet at a "no spin" , maybe someone on here knows what it is worth. thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

03-20-2010, 09:22 PM	#6
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,396	Re: value of Eaton 3/4 locker It would depend on what ratio it is also. IMO, if its 4.11 complete pumpkin, it would easily be worth $150-250, if it is the 4.57, lucky to get $100.

03-20-2010, 09:24 PM	#7
72swb_327stroker_? knuckle buster.. Join Date: Oct 2007 Location: Frisco Posts: 613	Re: value of Eaton 3/4 locker I would say anywhere between $350-650 depending on its condition. I paid $150 from Bill for a regular 1/2 ton posi unit...I thought that was super cheap! You can find these everywhere... But yours is rare, so this should set the bar for your pricing. Good luck! __________________ _______________________________________________________________________________ Eric THIS SITE ROCKS!!! Check out my suburban on 20's with fresh paint! Click here to support the site Check out the Member Photo Gallery here StreetCruizin FAQ thread Site vendors list (scroll down to vendors in red) join the the smilies fight club Last edited by 72swb_327stroker_?; 03-20-2010 at 09:26 PM.

03-20-2010, 09:35 PM	#8
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: value of Eaton 3/4 locker They are pretty scarce... But if I found one for my H052, and it was just a used one that I had no idea about. Truthfully, I'd only pay a scrap price for it if came straight out of a junk axle. Meaning that I would have no idea about if it actually worked correctly... Good trading fodder though! __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

03-21-2010, 10:57 AM	#9
justcuz Registered User Join Date: May 2008 Location: Alta Loma, Ca. Posts: 930	Re: value of Eaton 3/4 locker If they are in good shape thay can go for 100 to 500 dollars. I would not pay more than 150 dollars for one. Why, because you can take a No-Spin (Detroit Locker) from a newer GM 14 bolt full floater and install it and 14 bolt axles. In doing so you get 30 spline axles and a cheaper locker. The 14 bolt detroit fits right into the HO52/72 carrier. The axles may need a slight trim, I've forgotten how much if any. Most guys think these lockers for the old axle are worth gold. They really are not. The old axles have 17 splines and are not as strong as the 14 bolts axle with 30 splines. So don't let anybody BS you that these things are worth a ton of money. You can buy a brand new Detroit Locker for a 14 bolt for 350 dollars.

03-21-2010, 11:02 AM	#10
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: value of Eaton 3/4 locker I agree with Factorystock, gear ratio is an important factor if your selling complete. Some were even 5.14 ratio! $200-300 range seems to be pretty fair for one. Sharpie

03-21-2010, 11:34 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: value of Eaton 3/4 locker I`ve never paid more than $125. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.