will 33's fit a 3/4 2wd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BB72CHEVKT · 03-23-2010, 04:28 PM

Pics if you have them.

Wideopenracing15 · 03-23-2010, 07:58 PM

I think it would be a bit close if they do.

culp7 · 03-23-2010, 08:12 PM

i am pretty sure i have 32's on my 68 c20 and they fit alright

72freak · 03-23-2010, 08:30 PM

Im fairly sure they will rub in tight turns!! Depending on the width of the rims and how worn out your springs are will also play a role in the equasion........

BB72CHEVKT · 03-23-2010, 09:05 PM

Any one running 32's then? I know 31's are no prob cause I run them on the 1/2 ton. Any one know of a 2wd lift kit? I have searched and found nothing.

72freak · 03-23-2010, 09:35 PM

Quote:

Originally Posted by BB72CHEVKT

Any one running 32's then? I know 31's are no prob cause I run them on the 1/2 ton. Any one know of a 2wd lift kit? I have searched and found nothing.

Aim is not recomended but they will have what you need

culp7 · 03-23-2010, 09:38 PM

lmc sells a 3 inch body lift. and as above i am pretty sure i run 32's, and they work fine on my 68 c20

BB72CHEVKT · 03-23-2010, 09:41 PM

Thanks 72Freak but I will pass on AIM.

CE20934 · 03-23-2010, 09:58 PM

Quote:

Originally Posted by BB72CHEVKT

Any one running 32's then? I know 31's are no prob cause I run them on the 1/2 ton. Any one know of a 2wd lift kit? I have searched and found nothing.

I'm running LT235/85R-16s (31.75" on paper, 32.5" measured) on mine without any rubbing. Even with the old, tired springs up front I had no rubbing.

dougo · 03-23-2010, 10:23 PM

I've got 33's on a 4 inch lift... and rubbing in a tight turn. I'd have to measure the tire width...cannot recall of hand. I can also take a pic if you want. I actually need to figure out what's going on...it's driving me crazy. I want to make sure I can run a 33 with steelies... as that is the path I'm taking.

ERASER5 · 03-23-2010, 10:54 PM

You can run 33 on a stock C10. A C20 will do fine. I looked for an old thread about 2WD lifts and the lack of them. I could not find it. One of our members runs a C10 on 33s without any lift. C20s have more clearance.

Rim offset is often the problem

pmpski_1 · 03-24-2010, 10:25 AM

I'm going this route and worried about the same thing. Look for posts by stllookn, he has 33s on a C20. I've test fitted the 33s on mine but for various reasons wasn't able to check if they rub in tight turns.

I'm hoping to get things sorted out and do a proper test this weekend. You can see there is a lot of clearance, but turning will be tight.

69GMCLonghorn · 03-24-2010, 12:32 PM

A neighbor had a 70 3/4 ton 396 with factory "wide" rims all the way around. The stock tire size was 33 x 12.50 x 16.5 with no rubbing... I'm not sure what the spacing on the rims is to allow for this, but it didn't stick out and looked fine. I ran 275/85/16's on my 1 ton. On the right side, I had to trim about a 1/2" off of... something, don't remember what, but I think that is because my rim spacing was for narrower tires.

**leddzepp** · 03-24-2010, 12:37 PM

Here is my 72 C/20 2WD with 33 x 12.50 x 16.5 tires. It rubbed slightly when I made a right turn, but I attribute that to 40yr old ball joints, springs, etc. It had no rubbing when turning to the left.

BB72CHEVKT · 03-24-2010, 01:32 PM

Thanks guy and thanks for the pic leddzepp. I think 32/10.5 is about max for me.

Mike C · 03-24-2010, 02:32 PM

265 75 16 is pretty much a 32 11.5 16. I ran those on my 70 C2500 Sierra Grande and they were fine. No rubbing and a good size IMO. I ran mine on 16x7 Alcoas.

03-23-2010, 04:28 PM	#1
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	will 33's fit a 3/4 2wd Pics if you have them. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

03-23-2010, 07:58 PM	#2
Wideopenracing15 Registered User Join Date: Aug 2009 Location: Des Moines, IA Posts: 299	Re: will 33's fit a 3/4 2wd I think it would be a bit close if they do. __________________ 1969 C/20:

03-23-2010, 08:12 PM	#3
culp7 HickTown Join Date: Apr 2009 Location: ANDOVER, Kansas Posts: 355	Re: will 33's fit a 3/4 2wd i am pretty sure i have 32's on my 68 c20 and they fit alright __________________ 1993 Ford Mustang Vert w/ 2.3 1969 Chevy C/10 w/350 1968 Chevy C-20 w/250 1976 Dodge Aspen W/ 225 2000 Toyota Tundra w/4.7 1987 Dodge Ram D-100 w/360 255/70-15 ___________ (oo)══╬══(oo) ‾‾‾‾‾‾‾‾‾‾‾

03-23-2010, 08:30 PM	#4
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: will 33's fit a 3/4 2wd Im fairly sure they will rub in tight turns!! Depending on the width of the rims and how worn out your springs are will also play a role in the equasion........ __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

03-23-2010, 09:05 PM	#5
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: will 33's fit a 3/4 2wd Any one running 32's then? I know 31's are no prob cause I run them on the 1/2 ton. Any one know of a 2wd lift kit? I have searched and found nothing. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 03-23-2010 at 09:26 PM. Reason: add info

03-23-2010, 09:38 PM	#7
culp7 HickTown Join Date: Apr 2009 Location: ANDOVER, Kansas Posts: 355	Re: will 33's fit a 3/4 2wd lmc sells a 3 inch body lift. and as above i am pretty sure i run 32's, and they work fine on my 68 c20 __________________ 1993 Ford Mustang Vert w/ 2.3 1969 Chevy C/10 w/350 1968 Chevy C-20 w/250 1976 Dodge Aspen W/ 225 2000 Toyota Tundra w/4.7 1987 Dodge Ram D-100 w/360 255/70-15 ___________ (oo)══╬══(oo) ‾‾‾‾‾‾‾‾‾‾‾

03-23-2010, 09:41 PM	#8
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: will 33's fit a 3/4 2wd Thanks 72Freak but I will pass on AIM. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

03-23-2010, 10:23 PM	#10
dougo Registered User Join Date: Feb 2010 Location: Southern California Posts: 543	Re: will 33's fit a 3/4 2wd I've got 33's on a 4 inch lift... and rubbing in a tight turn. I'd have to measure the tire width...cannot recall of hand. I can also take a pic if you want. I actually need to figure out what's going on...it's driving me crazy. I want to make sure I can run a 33 with steelies... as that is the path I'm taking. __________________ Doug '72 GMC K2500 Suburban 4x4

03-23-2010, 10:54 PM	#11
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: will 33's fit a 3/4 2wd You can run 33 on a stock C10. A C20 will do fine. I looked for an old thread about 2WD lifts and the lack of them. I could not find it. One of our members runs a C10 on 33s without any lift. C20s have more clearance. Rim offset is often the problem __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60 Last edited by ERASER5; 03-23-2010 at 10:57 PM.

03-24-2010, 10:25 AM	#12
pmpski_1 Registered User Join Date: Jan 2006 Location: Seattle WA Posts: 505	Re: will 33's fit a 3/4 2wd I'm going this route and worried about the same thing. Look for posts by stllookn, he has 33s on a C20. I've test fitted the 33s on mine but for various reasons wasn't able to check if they rub in tight turns. I'm hoping to get things sorted out and do a proper test this weekend. You can see there is a lot of clearance, but turning will be tight. __________________ Curry in a Hurry: SB rebuild for my 71 C20

03-24-2010, 12:32 PM	#13
69GMCLonghorn Registered User Join Date: Dec 2006 Location: Porter Ranch, CA Posts: 978	Re: will 33's fit a 3/4 2wd A neighbor had a 70 3/4 ton 396 with factory "wide" rims all the way around. The stock tire size was 33 x 12.50 x 16.5 with no rubbing... I'm not sure what the spacing on the rims is to allow for this, but it didn't stick out and looked fine. I ran 275/85/16's on my 1 ton. On the right side, I had to trim about a 1/2" off of... something, don't remember what, but I think that is because my rim spacing was for narrower tires.

03-24-2010, 12:37 PM	#14
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: will 33's fit a 3/4 2wd Here is my 72 C/20 2WD with 33 x 12.50 x 16.5 tires. It rubbed slightly when I made a right turn, but I attribute that to 40yr old ball joints, springs, etc. It had no rubbing when turning to the left. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

03-24-2010, 01:32 PM	#15
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: will 33's fit a 3/4 2wd Thanks guy and thanks for the pic leddzepp. I think 32/10.5 is about max for me. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

03-24-2010, 02:32 PM	#16
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,715	Re: will 33's fit a 3/4 2wd 265 75 16 is pretty much a 32 11.5 16. I ran those on my 70 C2500 Sierra Grande and they were fine. No rubbing and a good size IMO. I ran mine on 16x7 Alcoas. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.