TX Parting out 1968 truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

altunaa · 03-29-2010, 04:58 PM

Quote:

Originally Posted by yellowGT

There is no price on the trim pieces because people want individual pieces and not all. Now if I was selling all trim together I would price it as a whole.

hi yellow,
how much for the whole side trim shipped to fl?
thank you, best regards,
arturo

**NGN** · 03-29-2010, 10:15 PM

Is that a inline 6 or V8 ? interested in some parts . I need the throttle bracket (not really sure what it's called) that sits on top of the manifold of a six cyl and with the linkage going to the carb, it's also used for the down shift cable (or rod) off the auto trans. And if it is a 6cyl with a/c I'd be interested in pulleys and all a/c stuff . Got to go wife's talking . Thanks

03-29-2010, 10:15 PM	#2
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 840	Re: Parting out 1968 truck Is that a inline 6 or V8 ? interested in some parts . I need the throttle bracket (not really sure what it's called) that sits on top of the manifold of a six cyl and with the linkage going to the carb, it's also used for the down shift cable (or rod) off the auto trans. And if it is a 6cyl with a/c I'd be interested in pulleys and all a/c stuff . Got to go wife's talking . Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.