Blown heater core turned new cab floor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RaVeNlI666 · 03-31-2010, 02:57 AM

my heater core went kaput over the weekend and this is what i found when i peeled the carpet back to dry things out........

RaVeNlI666 · 03-31-2010, 03:08 AM

the cracked section there is this right here when peeled back

the p/o lowered the rear the wrong way

cut and re-welded as high up on the frame as they could..... problem is they moved differently on all 4 of them. I have a 3" block between the rear end and spring on ONE side

and for s&g front end pic form a few years back before i sorta redid the motor

03-31-2010, 02:57 AM	#1
RaVeNlI666 Registered User Join Date: Oct 2009 Location: Auburn wa Posts: 16	Blown heater core turned new cab floor my heater core went kaput over the weekend and this is what i found when i peeled the carpet back to dry things out........

03-31-2010, 03:08 AM	#2
RaVeNlI666 Registered User Join Date: Oct 2009 Location: Auburn wa Posts: 16	Re: Blown heater core turned new cab floor the cracked section there is this right here when peeled back the p/o lowered the rear the wrong way cut and re-welded as high up on the frame as they could..... problem is they moved differently on all 4 of them. I have a 3" block between the rear end and spring on ONE side and for s&g front end pic form a few years back before i sorta redid the motor

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.