73-87 Parts F/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hardrock2 · 02-05-2003, 12:30 AM

Hi all!
Been rummaging through my stash of parts and found some stuff
I need to move.
Found a set of 5 NOS hubcaps for 77-? I think I ordered them for a
78. can't be sure! great for resto. or even a nice car trailer or???? $50.00 + shipping for all 5 or split for $10.00 each

One pretty nice dark saddle 77 silverado dash pad, great for driver, no cracks, nice around speaker grille. $75.00 + shipping
SOLD

Two good dash pads 75-80 (1 dark saddle, 1 med. blue) no cracks, good around speaker grilles. $45.00 each + shipping
SOLD
Two power window setups, 79+80 complete.( regulators, motors, door wiring, boots, under dash harness, switches, etc.) $150.00 each set + shipping
SOLD

One super nice 8' fleetside bed floor and wheel tubs. (bed mat since new, hardly a scratch!) the mat just wore the paint thin in spots, no rust, 81-up galva- dipped. If you've ever spent weeks (or paid someone else to) trying to smooth one of these floors out,you'll know it's a steal at this price.) $250.00 + shipping With tubs!! Might split? Edit: (wheeltubs SOLD,)

This is just a quick "sort through" to get started, I know I'll find tons more if I keep digging!!!!!

I know I have a few tach/ guage dashes for these trucks, just can't remember where I hid'em!!! LOL!! Look for updated post when I find'em!
SOLD
Thanks,
Mike

E-mail me at: 69Pace@ctitech.com

bigblock73 · 02-05-2003, 12:46 AM

Sent you an E-mail...thanks.

-Jeff

MAC67 · 02-05-2003, 01:32 AM

hey hardrock,,whered the pics come from ?

Hardrock2 · 02-05-2003, 01:55 AM

Well, Hey, Mac67, a camera, I rekkon,LOL! I had to begit,borrowit from the Roundman.(Dave)
He brings his Digi home from work on the weekends.

Why don't you buy some parts from me so I can buy my ownDC!!HeHe!!

Mike

Showme-K-20 · 02-05-2003, 08:00 AM

PM'd you.

*rayville body* · 02-05-2003, 09:15 AM

hey! i need a tach dash for my 80.has to have the 85 mph speedo. if you find them how much and pics please.

Hardrock2 · 02-05-2003, 11:07 AM

Hello rayville body,

Got ya down for a tach dash! '80, 85 MPH

Bear with me, there's alot of stuff here,
will sort through more tonight, after work.
I'll get you a price and condition then.

Thanks,

Mike

*stepside68* · 02-09-2003, 11:06 PM

what color is that brow looking one is a dark tan or just brown

Hardrock2 · 02-09-2003, 11:27 PM

stepside68

It's the earlier darker brown.
I took it from a 1975 GMC "gentleman Jim"
I believe GM called it Carmel, not sure.

Depending on what year you had, they differ.
Usually, earlier trucks had the dark carmel interiors,
later trucks had med. carmel. later trucks had buckskin,etc.

As with most of these year trucks nothing in the interiors ever
matched even when new. I had a black 77 Silverado with buckskin interior.It was light tan,buckskin,faded pink,dark brown carpet, light brown door carpets,etc. nothing matched, and it was only a two year old truck at the time! late buckskin was the worst
to fade!!

Edit: BTW, I stuck a woodgrain silverado insert in it (77)
It just looked nicer!!
Mike

**smokinn** · 02-10-2003, 04:43 PM

Hey there

I'm looking for pw motor for right and left side for a 82. Hope you can help me out.

Jason

Hardrock2 · 02-10-2003, 05:07 PM

smokinn,

Let me see what I can find.

One PW setup above is sold, other is pending.

Only truck with PW I have left is my 83 6.2L farm buggy!!!
Hate to pull them, it's around 19 degrees right now!! HaHa!!

If memory serves, I believe some mid 70's GM full size cars had the same motors. I know 75 Caprice 4 door, the REAR's are the same as 77-80 truck, but left is right, and right is left. Usually, rear windows don't get 1/2 the workout that front's do!!!
If i can dig some up I'll let ya know!
Thanks,
Mike

bigblock73 · 02-11-2003, 12:46 AM

Mike, e-mailed you on the parts I was interested in...still interested! Please write back.

-Jeff

Hardrock2 · 02-11-2003, 01:05 AM

Yes Jeff,

Glad I caught you here!
Just E-mailed ya back about 10 min. ago.

Packed and ready to go, Can ship tomorrow morning.

Mike

bigblock73 · 02-11-2003, 01:14 AM

Quote:

Originally posted by Hardrock2
Yes Jeff,

Glad I caught you here!
Just E-mailed ya back about 10 min. ago.

Packed and ready to go, Can ship tomorrow morning.

Mike

Mike, not sure what is going on but I haven't recv'd your e-mail yet...something is wrong on one of our ends. Can you PM me with the info so i can get you the $$$?

-Jeff

Hardrock2 · 02-11-2003, 03:47 AM

Jeff,

PM'd ya, re-sent E-mail, got yours. Everything's good to go!
Thanks for your business!
( I think you'll like'm!!)
Mike

Hey, anybody want those NOS hubcaps????
My dog, Cheyenne, is houndin' me for a new water bowl!!
Sure don't want to let'em end up yard art!

*rayville body* · 02-11-2003, 09:43 AM

hardrock, any luck on the tach dash yet?

87gmc · 02-11-2003, 10:44 AM

i am looking for the aluminum tailgate band that fit into the indent on the tailgate i was wondering if you had one of those in good condition.

TIA,
Cameron

Hardrock2 · 02-11-2003, 12:04 PM

Hi all,

Sorry, rayville, no luck finding a tach that year (80) with
correct MPH, and the right style faces. PM sent. Got ya down for one when I do. though!!!! I think 80-82 might be unique to itself.
Mine are all 73-79 style. 100 MPH units.
Had several inquiries about tachs for 83-90 trucks.
I think GM dropped the tach option around 83, if i'm not
wrong. Anybody remember trying to order a new 83-87-90(old style) truck with tach??? Anyone seen or have a truck those
years with a factory tach???

Hi to Cameron!

Got a few early style tailgate bands for chevrolet (73-80)
but, no can do on 81-87 style or GMC's, Sorry!

PS: The hot ticket used to be, get a tailgate band from a
74 or 75 GMC. they had GMC stamped into the upper left
corner of the tailgate itself, and the band was emblem free!!
Did this on my 77 Chevy, and everybody wondered how the heck I
shaved the trim holes in the brushed alum.!!

Mike

bigblock73 · 02-13-2003, 09:37 PM

To everyone considering purchasing parts from Mike...have no worries, he is a first class business man...Thanks again Mike for the awesome service and parts!!!

-Jeff

Hardrock2 · 02-14-2003, 04:30 AM

Glad I could help.

Mike

**crossy** · 02-14-2003, 09:58 PM

Mike , whenever it's convenient for you . door panel pics and all the tach dashes , thanx , DAVE

Hardrock2 · 02-15-2003, 01:28 AM

crossy, Hi,

Looks like all my tachs are "pending sale."
An earlier E-mail wanted them all.
Would have liked to post here, and let the
board take their pick, but deal came before I could
get my new camera.
Should have it this this weekend, so I can post pics
then. I'll get shots of door panels and more!

BTW, before I blow my money on the wrong one,
anybody have suggestions on a good Digi?
(I'm a truck guy, not a photography bug!!!)

Mike

jimmygrey · 05-13-2003, 02:20 PM

i am looking for a pair of door panels for my Gentleman Jim. If you happen to have some please e-mail a pic to jimmy@deerestore.net when you get a chance .
Thanks

02-05-2003, 12:30 AM	#1
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	73-87 Parts F/s Hi all! Been rummaging through my stash of parts and found some stuff I need to move. Found a set of 5 NOS hubcaps for 77-? I think I ordered them for a 78. can't be sure! great for resto. or even a nice car trailer or???? $50.00 + shipping for all 5 or split for $10.00 each One pretty nice dark saddle 77 silverado dash pad, great for driver, no cracks, nice around speaker grille. $75.00 + shipping SOLD Two good dash pads 75-80 (1 dark saddle, 1 med. blue) no cracks, good around speaker grilles. $45.00 each + shipping SOLD Two power window setups, 79+80 complete.( regulators, motors, door wiring, boots, under dash harness, switches, etc.) $150.00 each set + shipping SOLD One super nice 8' fleetside bed floor and wheel tubs. (bed mat since new, hardly a scratch!) the mat just wore the paint thin in spots, no rust, 81-up galva- dipped. If you've ever spent weeks (or paid someone else to) trying to smooth one of these floors out,you'll know it's a steal at this price.) $250.00 + shipping With tubs!! Might split? Edit: (wheeltubs SOLD,) This is just a quick "sort through" to get started, I know I'll find tons more if I keep digging!!!!! I know I have a few tach/ guage dashes for these trucks, just can't remember where I hid'em!!! LOL!! Look for updated post when I find'em! SOLD Thanks, Mike E-mail me at: 69Pace@ctitech.com Attached Images __________________ hardrock2 Last edited by Hardrock2; 03-01-2003 at 04:23 AM.

02-05-2003, 01:55 AM	#4
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	Well, Hey, Mac67, a camera, I rekkon,LOL! I had to begit,borrowit from the Roundman.(Dave) He brings his Digi home from work on the weekends. Why don't you buy some parts from me so I can buy my ownDC!!HeHe!! Mike __________________ hardrock2

02-05-2003, 11:07 AM	#7
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	Hello rayville body, Got ya down for a tach dash! '80, 85 MPH Bear with me, there's alot of stuff here, will sort through more tonight, after work. I'll get you a price and condition then. Thanks, Mike __________________ hardrock2

02-09-2003, 11:27 PM	#9
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	stepside68 It's the earlier darker brown. I took it from a 1975 GMC "gentleman Jim" I believe GM called it Carmel, not sure. Depending on what year you had, they differ. Usually, earlier trucks had the dark carmel interiors, later trucks had med. carmel. later trucks had buckskin,etc. As with most of these year trucks nothing in the interiors ever matched even when new. I had a black 77 Silverado with buckskin interior.It was light tan,buckskin,faded pink,dark brown carpet, light brown door carpets,etc. nothing matched, and it was only a two year old truck at the time! late buckskin was the worst to fade!! Edit: BTW, I stuck a woodgrain silverado insert in it (77) It just looked nicer!! Mike __________________ hardrock2 Last edited by Hardrock2; 02-09-2003 at 11:32 PM.

02-10-2003, 05:07 PM	#11
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	smokinn, Let me see what I can find. One PW setup above is sold, other is pending. Only truck with PW I have left is my 83 6.2L farm buggy!!! Hate to pull them, it's around 19 degrees right now!! HaHa!! If memory serves, I believe some mid 70's GM full size cars had the same motors. I know 75 Caprice 4 door, the REAR's are the same as 77-80 truck, but left is right, and right is left. Usually, rear windows don't get 1/2 the workout that front's do!!! If i can dig some up I'll let ya know! Thanks, Mike __________________ hardrock2

02-05-2003, 12:46 AM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Sent you an E-mail...thanks. -Jeff

02-05-2003, 01:32 AM	#3
MAC67 " SHOW ME" Join Date: Jan 2003 Location: shelbyville illinois Posts: 2,624	hey hardrock,,whered the pics come from ?

02-05-2003, 08:00 AM	#5
Showme-K-20 Registered User Join Date: Feb 2001 Location: Southwest Missouri Posts: 153	PM'd you.

02-05-2003, 09:15 AM	#6
rayville body Account Suspended Join Date: Nov 2002 Location: rayville,LA Posts: 226	hey! i need a tach dash for my 80.has to have the 85 mph speedo. if you find them how much and pics please.

02-09-2003, 11:06 PM	#8
stepside68 Account Suspended Join Date: Feb 2002 Location: Jonesville NC Posts: 149	what color is that brow looking one is a dark tan or just brown

02-10-2003, 04:43 PM	#10
smokinn Senior Member Join Date: Aug 2002 Location: omaha,Ne Posts: 617	Hey there I'm looking for pw motor for right and left side for a 82. Hope you can help me out. Jason

02-11-2003, 12:46 AM	#12
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Mike, e-mailed you on the parts I was interested in...still interested! Please write back. -Jeff

02-11-2003, 01:05 AM	#13
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	Yes Jeff, Glad I caught you here! Just E-mailed ya back about 10 min. ago. Packed and ready to go, Can ship tomorrow morning. Mike __________________ hardrock2

02-11-2003, 03:47 AM	#15
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	Jeff, PM'd ya, re-sent E-mail, got yours. Everything's good to go! Thanks for your business! ( I think you'll like'm!!) Mike Hey, anybody want those NOS hubcaps???? My dog, Cheyenne, is houndin' me for a new water bowl!! Sure don't want to let'em end up yard art! __________________ hardrock2 Last edited by Hardrock2; 02-11-2003 at 03:53 AM.

02-11-2003, 09:43 AM	#16
rayville body Account Suspended Join Date: Nov 2002 Location: rayville,LA Posts: 226	hardrock, any luck on the tach dash yet?



Register or Log In To remove these advertisements.

02-11-2003, 10:44 AM	#17
87gmc I Got My Engine!!!!! Join Date: Oct 2002 Location: Palmer, AK Posts: 253	i am looking for the aluminum tailgate band that fit into the indent on the tailgate i was wondering if you had one of those in good condition. TIA, Cameron __________________ F.O.R.D. "F*cked Over Rebuilt Dodge" -+-+-+-+Cameron+-+-+-+- 1987 GMC HIGH SIERRA LWB 1500 32X11.50 383 TBI/Vortec Heads/Intake MSD Ignition Dual Exhaust Custom Pinstriping Sweet interior & stereo http://www.cgalvin29.freehomepage.com

02-11-2003, 12:04 PM	#18
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	Hi all, Sorry, rayville, no luck finding a tach that year (80) with correct MPH, and the right style faces. PM sent. Got ya down for one when I do. though!!!! I think 80-82 might be unique to itself. Mine are all 73-79 style. 100 MPH units. Had several inquiries about tachs for 83-90 trucks. I think GM dropped the tach option around 83, if i'm not wrong. Anybody remember trying to order a new 83-87-90(old style) truck with tach??? Anyone seen or have a truck those years with a factory tach??? Hi to Cameron! Got a few early style tailgate bands for chevrolet (73-80) but, no can do on 81-87 style or GMC's, Sorry! PS: The hot ticket used to be, get a tailgate band from a 74 or 75 GMC. they had GMC stamped into the upper left corner of the tailgate itself, and the band was emblem free!! Did this on my 77 Chevy, and everybody wondered how the heck I shaved the trim holes in the brushed alum.!! Mike __________________ hardrock2

02-13-2003, 09:37 PM	#19
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	To everyone considering purchasing parts from Mike...have no worries, he is a first class business man...Thanks again Mike for the awesome service and parts!!! -Jeff

02-14-2003, 04:30 AM	#20
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	Glad I could help. Mike __________________ hardrock2

02-14-2003, 09:58 PM	#21
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Mike , whenever it's convenient for you . door panel pics and all the tach dashes , thanx , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

02-15-2003, 01:28 AM	#22
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	crossy, Hi, Looks like all my tachs are "pending sale." An earlier E-mail wanted them all. Would have liked to post here, and let the board take their pick, but deal came before I could get my new camera. Should have it this this weekend, so I can post pics then. I'll get shots of door panels and more! BTW, before I blow my money on the wrong one, anybody have suggestions on a good Digi? (I'm a truck guy, not a photography bug!!!) Mike __________________ hardrock2

05-13-2003, 02:20 PM	#23
jimmygrey Registered User Join Date: May 2003 Location: Arkansas Posts: 16	door panels i am looking for a pair of door panels for my Gentleman Jim. If you happen to have some please e-mail a pic to jimmy@deerestore.net when you get a chance . Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.