Spedometer Cable Routing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Deryl · 04-08-2010, 08:56 PM

I'm finally going to put a speedometer cable in my 63, but I forgot where it goes through the firewall. There is a round hole to the lower right of the steering column looking from the drivers seat. Is that where it goes?

Big Fenders · 04-08-2010, 09:35 PM

Yes, that's where it goes. A grommet is made to snug in up too. One thing that I learned is to fasten the speedo cable to frame etc. to prevent it from wipping around which leads to trouble.
Bob

Deryl · 04-08-2010, 09:40 PM

Thanks Big Fenders. Good tip on fastening the cable too.

04-08-2010, 08:56 PM	#1
Deryl Registered User Join Date: Oct 2003 Location: Douglasville, Ga. Posts: 125	Spedometer Cable Routing I'm finally going to put a speedometer cable in my 63, but I forgot where it goes through the firewall. There is a round hole to the lower right of the steering column looking from the drivers seat. Is that where it goes? __________________ D's 63

04-08-2010, 09:35 PM	#2
Big Fenders Registered User Join Date: Mar 2008 Location: Tucson Arizona Posts: 264	Re: Spedometer Cable Routing Yes, that's where it goes. A grommet is made to snug in up too. One thing that I learned is to fasten the speedo cable to frame etc. to prevent it from wipping around which leads to trouble. Bob

04-08-2010, 09:40 PM	#3
Deryl Registered User Join Date: Oct 2003 Location: Douglasville, Ga. Posts: 125	Re: Spedometer Cable Routing Thanks Big Fenders. Good tip on fastening the cable too. __________________ D's 63

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.