Shaved gas filler-pics - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RACING29 · 01-24-2003, 09:35 PM

how much would it cost to get that done? give me a rough estimate. cause I just took my tank out and put a fuel cell in and need to fill that hole up. THANKS.

ol skool 68 · 01-25-2003, 02:14 AM

me too.......i would like to get one of those for my truck too!

justin · 01-25-2003, 05:05 AM

Sweet work!!
Here is a pic of mine.

Did you get those 6 inch drop coils on yet??

hobby67stepside · 01-25-2003, 04:43 PM

Just thought I'd show my gas fill hole closure:

hobby67stepside · 01-25-2003, 04:45 PM

Next step:

hobby67stepside · 01-25-2003, 04:48 PM

I would like to be able to do the quality work of fabman, but for me this will have to do.

ebfabman · 02-03-2003, 03:15 PM

Those look good you guys. I posted it in a separate post but I thought it might go good here also.

To those who want one of the fuel filler blank out patches, send $11 (that includes shipping) to

ebfabman
11 Concord Commons Pl SW #167
Concord, NC 28027-5025

To anyone I quoted a different price on the first ones I cut out, I will honor it just let me know.

These are contoured to the shape of the area of the cab where the hole is and have locater tangs to hold them in place while you weld. They are also the same gauge as OE sheetmetal.

Thank you for your patience.......eb

JHickson6 · 02-03-2003, 04:24 PM

What about shipping to Canada? Winnipeg, Manitoba to be exact! Postal code is R2Y 0R9 if that helps. Thanks ebfabman!

Jared

69 Short Fleet · 02-03-2003, 07:07 PM

Super JOB !!!

Rod · 04-28-2003, 08:04 PM

To the top.

pat · 04-28-2003, 11:04 PM

I dont know much of anything about body work, but I want to learn. What do you use to grind and finish the weld off?
Thanks
Do you still have blanks efabman?, i may want one.

Iron-Butt · 04-29-2003, 02:35 AM

looks great

VTKidder · 05-14-2003, 02:25 PM

well played...

dons72 · 05-14-2003, 03:12 PM

wow no putty. Nice work.

fast67chevy2002 · 05-14-2003, 03:58 PM

that filler job looked great. I hope that when I get to mine it will come out just as well.

01-24-2003, 09:35 PM	#51
RACING29 Registered User Join Date: Jul 2002 Location: Tennessee, Morristown Posts: 355	how much would it cost to get that done? give me a rough estimate. cause I just took my tank out and put a fuel cell in and need to fill that hole up. THANKS. __________________ 1967 Chevy truck, R1 racing seats, 4 point racing harness, 4/6 drop, primered blue, soon to be shaved, 350- 060. over, flat top pistons, Eagle rods, Edelbrock Aluminum heads, 1.5 Scorpion roller rockers, Lunati 515" cam, mallory ignition, Holley 750 double pumper carb, Built 350 turbo trans, 2500-2800 boss hog stall, 20 gallon aluminum fuel cell!!!

01-25-2003, 02:14 AM	#52
ol skool 68 turnin wrenches Join Date: Dec 2002 Location: my garage Posts: 260	me too.......i would like to get one of those for my truck too! __________________ "three can keep a secret if two are dead" -unknown hell's angel- D.M.C. -FF- 68 SWB full frame off (project ol skool) 2000 s-10 formally bagged but now my daily driver...

01-25-2003, 05:05 AM	#53
justin PROJECT LO-LYF Join Date: Jul 2002 Location: MO. Posts: 283	Sweet work!! Here is a pic of mine. Did you get those 6 inch drop coils on yet?? Attached Images __________________ FOUNDING MEMBER OF THE "O-SH*T, THAT TRUCK IS LOW" CLUB PROJECT: LO-LYF Bagged 68 Shorty home.att.net/~justin.lewis

02-03-2003, 03:15 PM	#57
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	Those look good you guys. I posted it in a separate post but I thought it might go good here also. To those who want one of the fuel filler blank out patches, send $11 (that includes shipping) to ebfabman 11 Concord Commons Pl SW #167 Concord, NC 28027-5025 To anyone I quoted a different price on the first ones I cut out, I will honor it just let me know. These are contoured to the shape of the area of the cab where the hole is and have locater tangs to hold them in place while you weld. They are also the same gauge as OE sheetmetal. Thank you for your patience.......eb Attached Images

02-03-2003, 04:24 PM	#58
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	What about shipping to Canada? Winnipeg, Manitoba to be exact! Postal code is R2Y 0R9 if that helps. Thanks ebfabman! Jared __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

01-25-2003, 04:43 PM	#54
hobby67stepside Registered User Join Date: Dec 2001 Location: NW Iowa Posts: 952	Just thought I'd show my gas fill hole closure:

01-25-2003, 04:45 PM	#55
hobby67stepside Registered User Join Date: Dec 2001 Location: NW Iowa Posts: 952	Next step:

01-25-2003, 04:48 PM	#56
hobby67stepside Registered User Join Date: Dec 2001 Location: NW Iowa Posts: 952	I would like to be able to do the quality work of fabman, but for me this will have to do.

02-03-2003, 07:07 PM	#59
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Super JOB !!!

04-28-2003, 08:04 PM	#60
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	To the top. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

04-28-2003, 11:04 PM	#61
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	I dont know much of anything about body work, but I want to learn. What do you use to grind and finish the weld off? Thanks Do you still have blanks efabman?, i may want one. __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

04-29-2003, 02:35 AM	#62
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	nice looks great __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

05-14-2003, 02:25 PM	#63
VTKidder Registered User Join Date: May 2003 Location: Vermont Posts: 996	well played...

05-14-2003, 03:12 PM	#64
dons72 Registered User Join Date: Mar 2003 Location: Newport News, Va Posts: 230	wow no putty. Nice work. __________________ 72 cheyenne super

05-14-2003, 03:58 PM	#65
fast67chevy2002 Dad's little helper Join Date: Apr 2003 Location: Helena, MT Posts: 194	that filler job looked great. I hope that when I get to mine it will come out just as well.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.