no wonder i cant find a kragan or schucks or anything like that here.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Fast68Chevy* · 03-19-2002, 03:36 PM

http://csk.know-where.com/CSKauto/

they dont exist here, surprise.......

all you westerners and southwesterners are lucky.. decent parts stores are a ***** to find, most any part has to be ordered in order to get it, aftermarket parts like manifolds and carbs and such arent easy to find in stores, i hear thta parts liek that are on shelves in stores elsewhere ? what about camshafts and heads and such ? stuff like that exist on store shelves anywhere ? that would be freaky to see, if so.,..

------------------
-71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it-
-'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies

-79 G20 pass van, 350/th350/10bolt,
paint is overrated
Randy- Lincoln, IL
randy@ccaonline.com
© RSS Enterprises 2000

mtdave2 · 03-19-2002, 03:41 PM

i hear that! im in south texas. even though there is several chain stores, pepboy.oreily, and even a napa (my fav). they all suck. rude, unknowledgable, and over priced... wish montana wasnt so dam cold all the time, im missing normal people.

bouncytruck · 03-19-2002, 04:51 PM

You think that Schucks is a decent auto parts store? The only thing they are good for is oil, cleaners, cheap tools, etc. If you have to ask them for a part, forget about it. They have no clue what-so-ever. Of course, my parents own an auto parts store so I have high standards! If I want real parts, I either phone my parents or visit the local NAPA store.

------------------
'69 K-5 Blazer - 350/TH350, 6" lift, 35" tires
Bothell, WA

Brad · 03-19-2002, 05:20 PM

Schucks=Schmucks

lux hauler · 03-19-2002, 05:24 PM

You can almost never go wrong with NAPA.

**COBALT** · 03-19-2002, 05:45 PM

Napa is the best place I'd HOPE to get the parts I need (notice I reserve the right to trash them too). Sometime's they've let me down hard.

There's only one Schucks in all of Washington state I'll go to. It's the one just north of Seattle on Aurora (hwy 99) past 85th as you near the turn to go to Northgate. There's a guy in there that races hotrods, and he works the parts counter. He's always in there working on someone's flywheel, or telling someone how to adjust their carb. There's this anoyingly slow check-out lady, though. She's wired to only run on 1/2 speed.

Every other schucks is a waste of time.

------------------
'69 3/4 ton C20 2wd w/ 350ci/400THM and a wood bed!
'69 3/4 ton Custom 20 2wd w/ ORIGINAL 350ci/4sp Manual and a wood bed (parts beast).
Seattle, WA.

*See pics of my trucks and project at www.webshots.com!

Maximum Overdrive · 03-19-2002, 05:57 PM

They got a couple of checkers (same company) close to here but there prices are just about the same as NAPA here. The only good thing is they will beat anyones price by 5% so it can be of some benifit to shop there.

------------------
1960 El Camino
1968 Chevy 2wd fleetside
1969 Chevy 2wd fleetside
1969 Chevy 4x4 fleetside
1970 GMC 3/4 fleetside

O2Bsogood · 03-19-2002, 07:06 PM

We don't have a kragan or schucks around here. I only go to a place called Hammon's. It's a privately owned parts store. Everyone who works there knows there cars. Even the owners wife knows more than I'll probably ever know. Theres only about 8 people who work there and they've been there as long as I can remember. Great people too. Everytime I went to O'Reileys or Auto Zone I got the wrong parts.

------------------
Alma, AR
70' Chevy Shortwide Fleetside-bagged front and rear, 350/350
69' Chevelle
96' Camaro
My Website

RainDog · 03-19-2002, 07:58 PM

Don't be too upset about not having a Schuck's near you. They're kind of the McDonald's of the auto parts business. I don't go there unless I know EXACTLY the part I need, or just need to pick up something basic like motor oil or an air filter.
I've always been very happy with NAPA. I was trying to find a part once for my front brake calipers, and I couldn't explain very well what I was looking for, so the guy behind the counter had the shop next door put my truck up on the lift and pulled one of the tires so I could show him.

just my 3 cents

busterwivell · 03-19-2002, 08:14 PM

I'm not proud to say we have Checker and Auto Zone here, either. I go to NAPA! My business helps sponser one of their employees at the local circle track, so I probably get special handling. Checkers is only good for oil. You can't even go there and ask for a set of Autolite #26 plugs, they have to know what it's for. I tell them my 56 Studebaker and they tell me the computer doesn't go back that far. Hell, they can't spell Studebaker!

O'l Buck · 03-20-2002, 02:02 AM

Napa gets 99.8%of my business. I spend alot of money in there. My father in law is always telling me to drive the extra 40 miles to go to O'reily, but every time I do, I have to order the part and it doesn't save me enough money to drive up there twice. Most of the time I have to order from Napa too, there isn't a very big demand for older parts in my area though. but I'm in town every day anyway.

------------------
'72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84
ralleys and 31/10.5s

67 Cutlass convertible
330, 3spd stick

90 GMC Jimmy
350/auto
Chad Stephens
Orleans,NE

**67 cst swb** · 03-20-2002, 02:19 AM

YA'LL ARE MAKIN' ME FEEL BAD...
I just quit my job of 5 years at a NAPA store. I went to a local wholesale auto warehouse that sells to the local parts stores... I have been in the Parts business for 16 years... hell, If I had sold parts to all ya'll, I would not have quit. I got tired of people asking for "that little silver thing with the wire on it, thats under my car. my mechanic says I need, and where does it go?" only to find out its the oxygen sensor... Or...get this
A guy bought a can of R-134 freon and wanted a screwdriver to poke a hole in the top of the can,to pour into his compressor he had just taken' the lines off the back off in the parking lot... now I sell to the knowledgeable parts guys/gals...lot less headache's....but I do agree NAPA does have good parts, and usually better parts people. If not, Hell, tell the owner, they are all mostly independently owned, let them know its the people that make you go there, it might help get better people, or help pay to keep the better people there.
Bryan in So.Dak

------------------
Bryan in South Dakota
-67 CST(CE147J122461)327-4bbl(missing) w/TH400 w/AC,PS,PB,3pc bench/bucket seat,small window,LWB. orig. blue/blue. needs serious restoration
-67 CST(plain janer) 283/MT LWB ---soon to look like 68 with 350/TH350 ShortWide Box
-2000 Silverado 1/2ton 2wd x-cab w/4th door
***future projects***
A 67/68 CST,SWB,350/TH350,Lowered 5/7, rollin' on 17's, not air bagged.using above listed 67 CST (janer)

68 Suburban · 03-20-2002, 02:20 AM

NAPA is a little more expensive, but it is worth it.

------------------
Check out other members trucks

1968 50th Anniversary C-10 Suburban (Tows all these cars all over the place)
1968 50th Anniversary C-10 Pickup
1968 50th Anniversary C-20 Pickup CST
1969 SS Camaro Conv't
2000 Chevy Malibu (Suppose to be daily driver, but the Burb is)

Phoenix, AZ.

Click Here for Parts and Venicles I have Available

THINGS I AM LOOKING FOR:
67-68 SUBURBAN TRIM. $$$$ Reward
for finding the 3rd door trim piece
and the small piece that goes on
the 1/4 panel right behind the
3rd door.

bobs409 · 03-20-2002, 07:57 AM

The Napa vendors in my area are alot more expensive! I just can't afford to pay top dollar all the time so im forced to do what most do. Buy at the chain type stores.

I miss the good old days before chain stores.

------------------
63 Impala*66 Chevelle SS*69 Chevelle*69 C10 Stepside*71 Cheyenne 20*72 Chevelle

Parts for sale:
http://www.angelfire.com/trek/mr409/items4sale.html

**StingRay** · 03-20-2002, 11:07 AM

Around here the chain stores really suck. prices are cheap but you get the junk that you pay for. More and more of the professional parts stores, many independant ones, are disappearing and good quality yet affordable parts are going with them. Quality parts are getting harder to find in general. In the last 7 years I have had to replace my water pump five times, my clutch fan 3 times (no the fan is not bent or out of balance),the starter 3 times, my HEI module 4 times and the distributor pick up coil 3 times. On a Toyota I have I replaced the water pump 3 times in two years and the clutch fan as many times. I have gotten tired of this and now spend more money at the GM and Toyota dealers. I pay more up front but it has ended up cheaper in the long run. I still do trust brands like Federal Mogul, Moog, CR, etc but good struff is definetly harder to find no matter where you are.

mtdave2 · 03-20-2002, 11:16 AM

i will never, ever, buy from the cheap parts store.. major parts that is. sure some my have a life time warenty..lol i changed my alternator 6 dam times in 3 years.. ended up buying a good one. i got tired of changing the thing. not worth it

you get what you pay for. napa does cost more, but its cheaper to do things one right. then 10 times the cheap way. not to mention if you sell your truck, its a major plus when they see napa part recepts.. at least it is to me..

03-19-2002, 03:36 PM	#1
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	no wonder i cant find a kragan or schucks or anything like that here.... http://csk.know-where.com/CSKauto/ they dont exist here, surprise....... all you westerners and southwesterners are lucky.. decent parts stores are a ***** to find, most any part has to be ordered in order to get it, aftermarket parts like manifolds and carbs and such arent easy to find in stores, i hear thta parts liek that are on shelves in stores elsewhere ? what about camshafts and heads and such ? stuff like that exist on store shelves anywhere ? that would be freaky to see, if so.,.. ------------------ -71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it- -'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies -79 G20 pass van, 350/th350/10bolt, paint is overrated Randy- Lincoln, IL randy@ccaonline.com © RSS Enterprises 2000

03-19-2002, 04:51 PM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	You think that Schucks is a decent auto parts store? The only thing they are good for is oil, cleaners, cheap tools, etc. If you have to ask them for a part, forget about it. They have no clue what-so-ever. Of course, my parents own an auto parts store so I have high standards! If I want real parts, I either phone my parents or visit the local NAPA store. ------------------ '69 K-5 Blazer - 350/TH350, 6" lift, 35" tires Bothell, WA __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-19-2002, 05:20 PM	#4
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Schucks=Schmucks __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

03-19-2002, 05:24 PM	#5
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	You can almost never go wrong with NAPA. __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

03-19-2002, 05:45 PM	#6
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Napa is the best place I'd HOPE to get the parts I need (notice I reserve the right to trash them too). Sometime's they've let me down hard. There's only one Schucks in all of Washington state I'll go to. It's the one just north of Seattle on Aurora (hwy 99) past 85th as you near the turn to go to Northgate. There's a guy in there that races hotrods, and he works the parts counter. He's always in there working on someone's flywheel, or telling someone how to adjust their carb. There's this anoyingly slow check-out lady, though. She's wired to only run on 1/2 speed. Every other schucks is a waste of time. ------------------ '69 3/4 ton C20 2wd w/ 350ci/400THM and a wood bed! '69 3/4 ton Custom 20 2wd w/ ORIGINAL 350ci/4sp Manual and a wood bed (parts beast). Seattle, WA. *See pics of my trucks and project at www.webshots.com! __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

03-19-2002, 03:41 PM	#2
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	i hear that! im in south texas. even though there is several chain stores, pepboy.oreily, and even a napa (my fav). they all suck. rude, unknowledgable, and over priced... wish montana wasnt so dam cold all the time, im missing normal people. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

03-19-2002, 05:57 PM	#7
Maximum Overdrive December 21, 2012 Join Date: Apr 2000 Location: Black Eagle, Montana Posts: 1,633	They got a couple of checkers (same company) close to here but there prices are just about the same as NAPA here. The only good thing is they will beat anyones price by 5% so it can be of some benifit to shop there. ------------------ 1960 El Camino 1968 Chevy 2wd fleetside 1969 Chevy 2wd fleetside 1969 Chevy 4x4 fleetside 1970 GMC 3/4 fleetside __________________ *"!Ama Sua, Ama Kjella, Ama Lllulla!"*

03-19-2002, 07:06 PM	#8
O2Bsogood Registered User Join Date: Oct 2001 Location: Charleston, Arkansas USA Posts: 599	We don't have a kragan or schucks around here. I only go to a place called Hammon's. It's a privately owned parts store. Everyone who works there knows there cars. Even the owners wife knows more than I'll probably ever know. Theres only about 8 people who work there and they've been there as long as I can remember. Great people too. Everytime I went to O'Reileys or Auto Zone I got the wrong parts. ------------------ Alma, AR 70' Chevy Shortwide Fleetside-bagged front and rear, 350/350 69' Chevelle 96' Camaro My Website __________________ 70' C-10 SWB 71' C-10 SWB 2001 Audi S4 1994 Ford F-150 1974 Gremlin 1959 Apache (Will be For Sale soon) 1972 Chevelle (Will also be For Sale soon)

03-19-2002, 07:58 PM	#9
RainDog Registered User Join Date: Mar 2001 Location: Burien, WA, USA Posts: 391	Don't be too upset about not having a Schuck's near you. They're kind of the McDonald's of the auto parts business. I don't go there unless I know EXACTLY the part I need, or just need to pick up something basic like motor oil or an air filter. I've always been very happy with NAPA. I was trying to find a part once for my front brake calipers, and I couldn't explain very well what I was looking for, so the guy behind the counter had the shop next door put my truck up on the lift and pulled one of the tires so I could show him. just my 3 cents __________________ "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats."

03-19-2002, 08:14 PM	#10
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	I'm not proud to say we have Checker and Auto Zone here, either. I go to NAPA! My business helps sponser one of their employees at the local circle track, so I probably get special handling. Checkers is only good for oil. You can't even go there and ask for a set of Autolite #26 plugs, they have to know what it's for. I tell them my 56 Studebaker and they tell me the computer doesn't go back that far. Hell, they can't spell Studebaker! __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

03-20-2002, 02:02 AM	#11
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	Napa gets 99.8%of my business. I spend alot of money in there. My father in law is always telling me to drive the extra 40 miles to go to O'reily, but every time I do, I have to order the part and it doesn't save me enough money to drive up there twice. Most of the time I have to order from Napa too, there isn't a very big demand for older parts in my area though. but I'm in town every day anyway. ------------------ '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84 ralleys and 31/10.5s 67 Cutlass convertible 330, 3spd stick 90 GMC Jimmy 350/auto Chad Stephens Orleans,NE __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

03-20-2002, 02:19 AM	#12
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	YA'LL ARE MAKIN' ME FEEL BAD... I just quit my job of 5 years at a NAPA store. I went to a local wholesale auto warehouse that sells to the local parts stores... I have been in the Parts business for 16 years... hell, If I had sold parts to all ya'll, I would not have quit. I got tired of people asking for "that little silver thing with the wire on it, thats under my car. my mechanic says I need, and where does it go?" only to find out its the oxygen sensor... Or...get this A guy bought a can of R-134 freon and wanted a screwdriver to poke a hole in the top of the can,to pour into his compressor he had just taken' the lines off the back off in the parking lot... now I sell to the knowledgeable parts guys/gals...lot less headache's....but I do agree NAPA does have good parts, and usually better parts people. If not, Hell, tell the owner, they are all mostly independently owned, let them know its the people that make you go there, it might help get better people, or help pay to keep the better people there. Bryan in So.Dak ------------------ Bryan in South Dakota -67 CST(CE147J122461)327-4bbl(missing) w/TH400 w/AC,PS,PB,3pc bench/bucket seat,small window,LWB. orig. blue/blue. needs serious restoration -67 CST(plain janer) 283/MT LWB ---soon to look like 68 with 350/TH350 ShortWide Box -2000 Silverado 1/2ton 2wd x-cab w/4th door *future projects* A 67/68 CST,SWB,350/TH350,Lowered 5/7, rollin' on 17's, not air bagged.using above listed 67 CST (janer) __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

03-20-2002, 02:20 AM	#13
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	NAPA is a little more expensive, but it is worth it. ------------------ Check out other members trucks 1968 50th Anniversary C-10 Suburban (Tows all these cars all over the place) 1968 50th Anniversary C-10 Pickup 1968 50th Anniversary C-20 Pickup CST 1969 SS Camaro Conv't 2000 Chevy Malibu (Suppose to be daily driver, but the Burb is) Phoenix, AZ. Click Here for Parts and Venicles I have Available THINGS I AM LOOKING FOR: 67-68 SUBURBAN TRIM. $$$$ Reward for finding the 3rd door trim piece and the small piece that goes on the 1/4 panel right behind the 3rd door. __________________ Just sitting here contemplating contemplation.

03-20-2002, 07:57 AM	#14
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	The Napa vendors in my area are alot more expensive! I just can't afford to pay top dollar all the time so im forced to do what most do. Buy at the chain type stores. I miss the good old days before chain stores. ------------------ 63 Impala66 Chevelle SS69 Chevelle69 C10 Stepside71 Cheyenne 20*72 Chevelle Parts for sale: http://www.angelfire.com/trek/mr409/items4sale.html __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

03-20-2002, 11:07 AM	#15
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Around here the chain stores really suck. prices are cheap but you get the junk that you pay for. More and more of the professional parts stores, many independant ones, are disappearing and good quality yet affordable parts are going with them. Quality parts are getting harder to find in general. In the last 7 years I have had to replace my water pump five times, my clutch fan 3 times (no the fan is not bent or out of balance),the starter 3 times, my HEI module 4 times and the distributor pick up coil 3 times. On a Toyota I have I replaced the water pump 3 times in two years and the clutch fan as many times. I have gotten tired of this and now spend more money at the GM and Toyota dealers. I pay more up front but it has ended up cheaper in the long run. I still do trust brands like Federal Mogul, Moog, CR, etc but good struff is definetly harder to find no matter where you are. __________________ Saskatoon, Saskatchewan Canada



Register or Log In To remove these advertisements.

03-20-2002, 11:16 AM	#16
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	i will never, ever, buy from the cheap parts store.. major parts that is. sure some my have a life time warenty..lol i changed my alternator 6 dam times in 3 years.. ended up buying a good one. i got tired of changing the thing. not worth it you get what you pay for. napa does cost more, but its cheaper to do things one right. then 10 times the cheap way. not to mention if you sell your truck, its a major plus when they see napa part recepts.. at least it is to me.. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.