Insert witty title here....

[screamin_c10]

Mo pics

[screamin_c10]

Ok, just a couple more...can you tell I'm stoked....

[mikajo39]

Originally Posted by screamin_c10

Mikajo39 - What compression are you running? How well does it do on pump gas?

9.5-1 It runs alright on 91. wish I could run some more timing, but otherwise it's pretty solid On a 110 degree day if I'm running a few too many degrees of timing it'll ping.Otherwise runs good, most of my problems are with my carb(jetted too lean), edelbrock 600cfm, definitely not suited for the cam and quite a choke on the engine, since Edelbrock flows their carbs dry(no wet flowing) which boosts the CFM rating falsely. I have a 2500 Rpm stall converter and even with the 3.08 gear in the back it has plenty of get up and go and I can roast my right rear tire for 4 city blocks

[mikajo39]

WOOHOO! Stoked for you! can't wait till it's up and running! It's gonna be a solid and powerful motor you can enjoy for many miles!