4" angled lower blocks and u bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phantom dually · 04-28-2003, 11:35 PM

This is a set of 4" angled lower blocks that are powder coated black. They are aluminum blocks with steel center pin. U bolts have also been powdered to resist rust. $26.00 shipped in the lower 48 only. These will fit all trucks with leafs and possibly others.

phantom dually · 05-03-2003, 02:59 AM

TTT

phantom dually · 05-08-2003, 07:26 AM

ttt

Bobs76 · 05-08-2003, 08:19 AM

Hey phantom, would you want to trade for a crossmember? I was going to make my own lowerin blocks an flip kit, but if I could get those it would make it easier..

phantom dually · 05-08-2003, 06:19 PM

I actually just bought a crossmember from Turners a few weeks ago. The bad thing is I paid about $150 for it. What else can you make up??

Bobs76 · 05-08-2003, 07:38 PM

I can weld almost anything you can think of, What do you need?

Bobs76 · 05-08-2003, 07:40 PM

I forgot to tell you a buddy of mine has a lathe I can use anytime I need.

Bobs76 · 05-08-2003, 08:43 PM

Would you happen to have a pic of thier mount? I would like to see how they make it.

phantom dually · 05-10-2003, 11:01 AM

I will try to get a pic in the nexy day or so and post it. Thanks

phantom dually · 05-13-2003, 04:38 PM

TTT

trukkers69 · 05-14-2003, 08:55 PM

You can use them for lift blocks too can't you? If you can im interested in them.

phantom dually · 05-14-2003, 10:07 PM

Yes I assume that you can!!

04-28-2003, 11:35 PM	#1
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	4" angled lower blocks and u bolts This is a set of 4" angled lower blocks that are powder coated black. They are aluminum blocks with steel center pin. U bolts have also been powdered to resist rust. $26.00 shipped in the lower 48 only. These will fit all trucks with leafs and possibly others. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-03-2003, 02:59 AM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-08-2003, 07:26 AM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-08-2003, 08:19 AM	#4
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Hey phantom, would you want to trade for a crossmember? I was going to make my own lowerin blocks an flip kit, but if I could get those it would make it easier.. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-08-2003, 06:19 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I actually just bought a crossmember from Turners a few weeks ago. The bad thing is I paid about $150 for it. What else can you make up?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-08-2003, 07:38 PM	#6
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I can weld almost anything you can think of, What do you need? __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-08-2003, 07:40 PM	#7
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I forgot to tell you a buddy of mine has a lathe I can use anytime I need. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-08-2003, 08:43 PM	#8
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Would you happen to have a pic of thier mount? I would like to see how they make it. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-10-2003, 11:01 AM	#9
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I will try to get a pic in the nexy day or so and post it. Thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-13-2003, 04:38 PM	#10
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-14-2003, 08:55 PM	#11
trukkers69 Registered User Join Date: Jan 2003 Location: Sebastopol Miss. Posts: 169	You can use them for lift blocks too can't you? If you can im interested in them. __________________ EXPERIMENTAL STAGES OF SANITY _____________________________ Run whatcha brung, and hope you brung enuff

05-14-2003, 10:07 PM	#12
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Yes I assume that you can!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.