![]() |
![]() |
#1 |
Registered User
Join Date: Mar 2010
Location: Wingate, NC
Posts: 117
|
what to do
hello im pretty new to this truck and this forum, ive only made a few threads. im in my early twenties and ive owned a straight 6 jeep and currnetly a 4 cyl 89 toyota. ive honestly never had to buy parts for a v8. ive had formal and informal education in body repair and work well mechanically. however i dont know much about engine building and am willin to learn just get lost sometimes. i have a 72 c10 that i got from my stepmothers family and its always been a farm truck. and the body shows. i sort of want to do a functional junker, almost like a rat rod but a rat rod has straight fenders. mainly just want this truck to run great and drive well and also be strong. Im going to take off the quadrajet and the manifold and get new ones. dont know if its worth it to port and polish the heads and upgrade the cam( Cause right now im not doing any bottom end work) Oh yea by the way the truck has 86k orig miles so im thinkin thats a good platform. tell me any ideas sugestions or advice ect.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2010
Location: Wingate, NC
Posts: 117
|
Re: what to do
some of my toyota
|
![]() |
![]() |
![]() |
#3 |
Big Red - Now its a SWB!
Join Date: Jun 2009
Location: Oroville, Ca
Posts: 1,624
|
Re: what to do
Welcome to the board! What motor do you have? You could run a compression test to get an idea of the condition of the bottom end, it should be fine though. You will definitely wake up the motor with a new cam, intake, etc. Depending on what heads you have they may not be worth much work, it may be cheaper to find new ones. When I had my motor built that is what my builder told me, he said the runners were to small to get good performance out of and I'd be better to buy some vortecs or something.
__________________
68 3/4 ton ![]() ![]() 41 3/4 ton ![]() 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2010
Location: Wingate, NC
Posts: 117
|
Re: what to do
i honestly have no idea what heads are on there i was told that the only thing thats been done to it is that the head gaskets have been changed (about 6 or 7 yrs ago) and the carb had a gasket kit done on it( any where from 10 to 15yrs ago) oh the 350 engine. i would assume that they are the stock heads, but you know what happens when you assume! i guess ill just say what i know its got. quadrajet thats a bit sluggish (plans for a 1411 eldebrock and a performer intake) stock heads (took covers off and not a speck of dust) stock bottom end, turbo hydramatic trans i want to say its got the 12bolt rearend.
|
![]() |
![]() |
![]() |
#5 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Re: what to do
Welcome to the forum camjck89. Most of us on here like trucks, cars, etc no matter what brand they are. We "prefer" old GM trucks, but if it's got a motor you have our attention.
Your best bet is to analyze what your truck needs to make sure it's safe. Check brakes, steering, etc for excessive play. Those are pretty straight forward and your mechanical aptitude should get you through the upgrades with a bit of guidance.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#6 |
Active Member
![]() Join Date: May 2005
Location: San Jose, CA
Posts: 235
|
Re: what to do
I'd suggest keeping that q-jet, giving it a rebuild. There is no matter carb for mileage and tune-a-bility. Just need to educate yourself about them.
J
__________________
Cadillac Powered |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2010
Location: Wingate, NC
Posts: 117
|
Re: what to do
id like to keep it cause i like the staggered carb for mileage, do you have any links to find out the mechanics of a qjet and how to tune it/ maintain it?
|
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: Mar 2010
Location: Wingate, NC
Posts: 117
|
Re: what to do
Quote:
|
|
![]() |
![]() |
![]() |
#9 | |
Active Member
![]() Join Date: May 2005
Location: San Jose, CA
Posts: 235
|
Re: what to do
Quote:
http://www.florida4x4.com/tech/quadrajet/index.php I suggest these 2 books. Both are very useful. ![]() ![]() It seems more complicated than it is. Take the time and do some studying. J
__________________
Cadillac Powered |
|
![]() |
![]() |
![]() |
#10 |
Grandpa in the rustmobile...
Join Date: Nov 2008
Location: Spokane WA/Viola TN
Posts: 11,422
|
Re: what to do
the chevy will be easier/cheaper to work on and (no offense lol) but you'll probably get more thumbs up with the chevy!!
sweet project what're the plans just make it a strait rat rod? paint it? build a motor bag it? more pics!
__________________
John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4 |
![]() |
![]() |
![]() |
#11 |
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
Re: what to do
Welcome to the board!
If in your position, I'd just clean up the truck and leave it until you get a good idea of whats out there. I'd start by upgrading the suspension, rebuild all four corners of brakes, change all fluids, pressure wash the engine, give the interior a good douche, and re do the seat. Drive it, and drive it some more. Go to a few truck shows, and see what others have done to their trucks. Ask a bunch of questions about how long it took, and how much money they spent. All that is what I did to my burb when my Dad gave it to me years ago, and I decided I liked the stock route for restoration after all that. As for the Toy, I have one too and the second gens are the best! Looking forward to seeing more of your plans and accomplishments on here!
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU |
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: Mar 2010
Location: Wingate, NC
Posts: 117
|
Re: what to do
Quote:
i just want for now to get that engine running real nice and of course be safe. but the outside if i can find a pass side fender the same color i would only do that to the outside untill i could do a complete resto. but that wont be for years so in the time being i just want you to be able to roll up and think nothin but not be able to get away ![]() |
|
![]() |
![]() |
![]() |
#13 | |
Registered User
Join Date: Mar 2010
Location: Wingate, NC
Posts: 117
|
Re: what to do
Quote:
your spot on im just trying to get this thing in good mechanical shape and then when the times right be able to take her out of commission and redo it oh and i also like the second gen. i couldnt find a stout of id be doing a diff rebuild |
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Mar 2010
Location: Wingate, NC
Posts: 117
|
Re: what to do
so im having a friend of mine who always does work on my 400ex rebuild my quadrajet. so im wondering do i need to get a new intake manifold? if i dont then i might think breaks ive never had a truck that they diddnt work great( i also never had manual power breaks) how should i check them??
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|