OR Blazer Frame Sections - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drunkbus · 03-31-2010, 01:18 PM

I have a 72 4x4 Blazer frame that is going to the scrap yard. Does anyone need any crossmembers or sections of frame before it goes?

JimmyFloyd · 04-01-2010, 12:29 AM

mounts? I could use some to make a dolly with. Rear frame rails if not cut?

72gmcshorty · 04-01-2010, 01:48 AM

if the front horns are the same as 2wd i could use the first 8" of both sides...

drunkbus · 04-01-2010, 11:06 PM

Quote:

Originally Posted by JimmyFloyd

mounts? I could use some to make a dolly with. Rear frame rails if not cut?

I do have the mounts cut off, I have them posted in a seperate thread. Rear frame rails are good, How much do you need?

drunkbus · 04-01-2010, 11:08 PM

Quote:

Originally Posted by 72gmcshorty

if the front horns are the same as 2wd i could use the first 8" of both sides...

I'm not sure if they are the same as 2wd, I would guess they are but you might want to make sure. I would do $30 shipped if you do want them.

MT300RUM · 04-02-2010, 09:34 PM

Do you have the rear rails from the crossmember behind the gas tank back? and also that crossmember itself ?
mine is a little tweaked and if it were cheap enough i might just buy yours rather than straightening mine, my zip is 59901

drunkbus · 04-02-2010, 10:16 PM

Quote:

Originally Posted by MT300RUM

Do you have the rear rails from the crossmember behind the gas tank back? and also that crossmember itself ?
mine is a little tweaked and if it were cheap enough i might just buy yours rather than straightening mine, my zip is 59901

Right now I still have the whole frame. If I don't hear anything from JimmyFloyd on the rear rails they are yours. I would have to knock the rivets out of the crossmember and break it down to ship it.

drunkbus · 04-02-2010, 10:30 PM

Quote:

Originally Posted by MT300RUM

Do you have the rear rails from the crossmember behind the gas tank back? and also that crossmember itself ?
mine is a little tweaked and if it were cheap enough i might just buy yours rather than straightening mine, my zip is 59901

Is this what you are looking for? I would do $65 shipped for the part from the red line back.

MT300RUM · 04-03-2010, 12:01 AM

Yeah that would be great , Put me in line

drunkbus · 04-03-2010, 04:01 PM

Quote:

Originally Posted by MT300RUM

Yeah that would be great , Put me in line

I'll give JimmyFloyd until Sunday afternoon to respond. If he passes or doesn't respond I can ship this stuff out to you on Monday.

69-72 · 04-04-2010, 08:34 PM

In line for the rear crossmember

drunkbus · 04-04-2010, 10:36 PM

Quote:

Originally Posted by 69-72

In line for the rear crossmember

MT300RUM is up next for the rear frame rails and crossmember. I'll let you know if he passes.

drunkbus · 04-24-2010, 12:33 PM

Rear frame rails and crossmember sold.

gm71jimmy · 04-27-2010, 06:29 PM

Quote:

Originally Posted by drunkbus

I'm not sure if they are the same as 2wd, I would guess they are but you might want to make sure. I would do $30 shipped if you do want them.

Hi drunkbus... Do you still have the front frame horns? If you do i will take them for the $30 shipped to Overton Nv 89040. Can paypal you the money
Please let me know. classichotrod@msn.com
Thanks

72gmcshorty · 04-27-2010, 08:37 PM

i will have to pass on the front horns

drunkbus · 04-28-2010, 02:17 PM

Quote:

Originally Posted by gm71jimmy

Hi drunkbus... Do you still have the front frame horns? If you do i will take them for the $30 shipped to Overton Nv 89040. Can paypal you the money
Please let me know. classichotrod@msn.com
Thanks

After looking at them closer, one of the front frame horns was cracked so I wasn't careful when I removed the front spring hangers and they are now trashed in that area. If you only need about the front 6-8" and don't mind welding up the crack they would be fine.

gm71jimmy · 04-28-2010, 03:31 PM

Quote:

Originally Posted by drunkbus

After looking at them closer, one of the front frame horns was cracked so I wasn't careful when I removed the front spring hangers and they are now trashed in that area. If you only need about the front 6-8" and don't mind welding up the crack they would be fine.

That is fine. I just need the first 5" of them. So if you cut them right in the middle of were the hangers go that would be great. Can paypal you the money. Thanks

drunkbus · 04-28-2010, 04:59 PM

Quote:

Originally Posted by gm71jimmy

That is fine. I just need the first 5" of them. So if you cut them right in the middle of were the hangers go that would be great. Can paypal you the money. Thanks

PM sent with payment info.

sylfred · 04-29-2010, 12:23 PM

in need of a good windshield frame, can you help

drunkbus · 04-29-2010, 12:39 PM

Quote:

Originally Posted by sylfred

in need of a good windshield frame, can you help

I have one but I'm keeping it until I know if I'll need it or not. I haven't had my top off yet.

03-31-2010, 01:18 PM	#1
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Blazer Frame Sections I have a 72 4x4 Blazer frame that is going to the scrap yard. Does anyone need any crossmembers or sections of frame before it goes?

04-01-2010, 12:29 AM	#2
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Blazer Frame Sections mounts? I could use some to make a dolly with. Rear frame rails if not cut? __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

04-01-2010, 01:48 AM	#3
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Blazer Frame Sections if the front horns are the same as 2wd i could use the first 8" of both sides... __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

04-02-2010, 09:34 PM	#6
MT300RUM Registered User Join Date: Mar 2010 Location: Kalispell Montana Posts: 73	Re: Blazer Frame Sections Do you have the rear rails from the crossmember behind the gas tank back? and also that crossmember itself ? mine is a little tweaked and if it were cheap enough i might just buy yours rather than straightening mine, my zip is 59901

04-03-2010, 12:01 AM	#9
MT300RUM Registered User Join Date: Mar 2010 Location: Kalispell Montana Posts: 73	Re: Blazer Frame Sections Yeah that would be great , Put me in line

04-04-2010, 08:34 PM	#11
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: Blazer Frame Sections In line for the rear crossmember __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery

04-24-2010, 12:33 PM	#13
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: Blazer Frame Sections Rear frame rails and crossmember sold.

04-27-2010, 08:37 PM	#15
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Blazer Frame Sections i will have to pass on the front horns __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

04-29-2010, 12:23 PM	#19
sylfred Registered User Join Date: Apr 2010 Location: roanoke rapids,n.c. Posts: 26	Re: Blazer Frame Sections in need of a good windshield frame, can you help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.