05-04-2010, 08:12 PM | #1 |
Registered User
Join Date: Feb 2010
Location: columbus ga
Posts: 231
|
door
got my new rocker put on but found out that when i welded in my patch panel for the lower part of the door i warped the front corner. does anyone know how to fix this?
|
05-04-2010, 08:57 PM | #2 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: door
You could probably hamer and dolly it back out.
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
05-04-2010, 09:00 PM | #3 |
Registered User
Join Date: Feb 2010
Location: columbus ga
Posts: 231
|
Re: door
the hole corner is pulled in too far and the bottom of the door doesnt sit flush with the rocker
|
05-04-2010, 11:12 PM | #4 |
fan of "Butters" Stotch
Join Date: Dec 2009
Location: St. Paul, MN
Posts: 267
|
Re: door
Got a pic?
You may have put a cut in the door, get if where you want, and reweld it. Do it on the truck if possible to make sure the door fits with the rocker and door opening
__________________
64 shortbox fleetside replacing rusty junk with more junk, and one day to become a real truck again |
05-04-2010, 11:18 PM | #5 |
1961 crewcab
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
|
Re: door
also check that the rocker is not the problem, and be sure to mount the fender as well to get all three pieces lined up.
__________________
60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955 |
05-05-2010, 07:38 AM | #6 |
Registered User
Join Date: Feb 2010
Location: columbus ga
Posts: 231
|
Re: door
it lines up good. so i have to cut my new panel off the door to try and straightin it back out
|
05-05-2010, 07:40 AM | #7 |
Registered User
Join Date: Feb 2010
Location: columbus ga
Posts: 231
|
Re: door
i cant really mount the fender right now cause my truck is just a cab and a frame. its all takin apart with all the rusted stuff thrown away. so i have no core sopport right now
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|