![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2005
Location: Kernersville, NC
Posts: 599
|
WTB 1 Ton Leafs
Lookin for a set of 1 ton, 8 leaf springs from a G-30 van. Can be either 52" or 54". Thanks, Chris.
__________________
its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. ![]() ![]() 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's Last edited by 71chevytruckguy; 05-16-2010 at 05:20 AM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 164
|
Re: WTB 1 Ton Leafs
Hello,
I have a good set in PA, but not sure if shipping would be practical. Let me know if interested. Thanks, Joe |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2005
Location: Kernersville, NC
Posts: 599
|
Re: WTB 1 Ton Leafs
I'm interested. How much you wanting for them shipped to 27284? Thanks, Chris.
__________________
its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. ![]() ![]() 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 164
|
Re: WTB 1 Ton Leafs
Chris,
I'll have to check on shipping and get back to you. I know they're awfully heavy ![]() Thanks, Joe |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2005
Location: Kernersville, NC
Posts: 599
|
Re: WTB 1 Ton Leafs
Have not doubt. Keep me posted. Chris.
__________________
its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. ![]() ![]() 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|