|
05-25-2010, 02:46 PM
|
#1 |
|
Registered User
Join Date: Feb 2010
Location: Allen Texas
Posts: 40
|
Wheel Size
What is the widest 15 inch diameter wheel you can run on the front of a 68 C-10 with stock suspension ?
Is a 8 - 9 inch too wide for turning ? I believe 15x7 were stock from the factory so I am hoping a 15x8 will fit as well.
__________________
 Rob Hamlin
Last edited by rhamlin; 05-25-2010 at 04:03 PM. |
|
|
|
05-25-2010, 04:17 PM
|
#2 |
|
Registered User
Join Date: Mar 2005
Location: 10-Uh-See
Posts: 5,609
|
Re: Wheel Size
15x8 wheels fit fine. 15x10's will fit good until you lower the front more than 4 inches.
Here's mine with 15x8 all around with 275/60/15 rear, 255/60/15 steer and 3.5/5 drop.  
__________________
|
|
|
|
|
05-25-2010, 04:44 PM
|
#3 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Wheel Size
most stock wheels were 15 X5.5 or 6"wide// i've always liked 7 or 8inch wide wheels in front
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
05-25-2010, 11:35 PM
|
#4 |
|
Registered User
Join Date: Feb 2010
Location: Oakhurst, Kalifornia
Posts: 77
|
Re: Wheel Size
15x8 with 265/70/15s
__________________
SEMPER FI 96 F350 CC/4X/7.3/ZF5 77 F150 SB/4X/NP435/NP205 70 C10 400/400 63 F250 4X/T98/NP205 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
