Vent window help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dirtball · 06-01-2010, 04:43 PM

I want to replace the glass in my vent windows. Anyone know how to remove and replace the glass only? Thanks in advance.

dirtball · 06-01-2010, 11:01 PM

Ttt

dirtball · 06-02-2010, 10:53 PM

Bueller.....Bueller?

Anybody ever replace the glass in their vent windows that could give me some tips?

dan42 · 06-03-2010, 12:49 AM

It's put in with tape - you should be able to just pop it out and replace it with the new glass - you need to go to a glass store to get some of the tape that goes around the edges, but it's a pretty easy job, really.

Dustydog · 06-03-2010, 12:59 AM

You should be able to use a heat gun to warm up the metal where the glass sits. You may see some smoke coming out from the rubber used to hold the glas in place and that's ok. Get it all warm and then start working the glass out. You will need to keep going over it with the heat and then all of a sudden it will all come out.
You can get the tapa to put it back in with at a auto parts store like NAPA or a paint supply store. Just tell them what you are doing and they will know what you need.

Dusty

dirtball · 06-03-2010, 12:47 PM

Hey thanks for the help fellas, that is what I needed to know.

06-01-2010, 04:43 PM	#1
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Vent window help I want to replace the glass in my vent windows. Anyone know how to remove and replace the glass only? Thanks in advance. __________________ Brett Last edited by dirtball; 06-02-2010 at 10:56 PM. Reason: Clarity of question

06-01-2010, 11:01 PM	#2
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Re: Vent window help Ttt __________________ Brett

06-02-2010, 10:53 PM	#3
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Re: Vent window help Bueller.....Bueller? Anybody ever replace the glass in their vent windows that could give me some tips? __________________ Brett

06-03-2010, 12:49 AM	#4
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Vent window help It's put in with tape - you should be able to just pop it out and replace it with the new glass - you need to go to a glass store to get some of the tape that goes around the edges, but it's a pretty easy job, really. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

06-03-2010, 12:59 AM	#5
Dustydog Registered User Join Date: Aug 2009 Location: Spring Grove Il Posts: 122	Re: Vent window help You should be able to use a heat gun to warm up the metal where the glass sits. You may see some smoke coming out from the rubber used to hold the glas in place and that's ok. Get it all warm and then start working the glass out. You will need to keep going over it with the heat and then all of a sudden it will all come out. You can get the tapa to put it back in with at a auto parts store like NAPA or a paint supply store. Just tell them what you are doing and they will know what you need. Dusty __________________ Dustydog 1940 Ford 2D SDN 1970 GMC SB 2004 C5 Vette

06-03-2010, 12:47 PM	#6
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Re: Vent window help Hey thanks for the help fellas, that is what I needed to know. __________________ Brett

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.