New Member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6T9GMC · 05-24-2003, 07:15 PM

HELLO,
I'M CHRIS FROM MOORE, OK. I BOUGHT THIS TRUCK FROM MY FATHER-IN-LAW LAST YEAR AND I'M IN THE PROCESS OF PUTTING A 95 STEPSIDE BED ON IT....IF YOU KNOW TRICKS ABOUT MOUNTING THE NEWER BED PLEASE HELP!!!!
HOPEFULLY HERE IS SOME PICS....

6T9GMC · 05-24-2003, 07:18 PM

PIC2

6T9GMC · 05-24-2003, 07:20 PM

THIS BED HAS A LOUVERED TAILGATE SKIN AND TAILLIGHTS IN THE REAR OF THE FENDERS WOOD IS PRETTY MUCH GONE.
MAKE ME AN OFFER IF INTERESTED!

**old Rusty C10** · 05-24-2003, 08:17 PM

your truck has alot of potential goodl uck with it and welcome to the boards

6T9GMC · 05-25-2003, 12:20 AM

THANKS!!

Longhorn Man · 05-25-2003, 12:36 AM

Welcome to the board from Ohio...lots of good info on here.
One thing you may have not noticed with the late model beds, the wheel wells don't match, and the lower portion doesn't line up very well.
It is known what I think of this swap, but don't let me or anyone else stop you if that's what you want. You could repair the tail lights and replace the tailgate cheaper than you may think.
Anywyas, welcome to the board and don't be afraid to ask questions.

6T9GMC · 05-25-2003, 12:57 AM

I'VE NOTICED THE WHEEL WELLS.. I'M GONNA MAKE THEM BOTH THE SAME SHAPE, JUST DON'T KNOW IF ROUNDED OR SQUARE YET?

6T9GMC · 05-25-2003, 01:01 AM

MY FATHER-IN-LAW ALWAYS WANTED TO PUT THE NEWER BED ON IT...TRYING TO DO SOME OF THE STUFF HE WANTED TO DO TO IT, FOR HIM. HE HASN'T BEEN ABLE TO DO MUCH TO IT, SO HE SOLD IT TO ME TO FIX UP!

Longhorn Man · 05-25-2003, 01:03 AM

Sweet, good luck to you.

FRENCHBLUE72 · 05-25-2003, 05:21 PM

Welcome from Southern Oregon and nice truck btw.

brad2 · 05-27-2003, 12:18 AM

Welcome from Edmond

krue · 05-27-2003, 12:23 AM

Welcome to the board from South Mississippi!

*dtlilly* · 05-27-2003, 02:32 AM

Welcome from W. Tennessee. Sounds like a good project.

How much for the steps from your truck?

sixty8chev · 05-27-2003, 03:34 AM

Just my 2 cents,
but go with the rounded wheelwells if you can,
if ya want to see somethin with square all the way round I'm sure somebody can direct ya to the one with the tucked duallies, and you can draw your own conclusions

Seke69 · 05-27-2003, 05:05 AM

welcome from Minnesota!

I could use a bed, but I'm lookin' for a short fleetside... should look pretty cool with a late model bedside, do have one in mind? or have you bought one yet? look for 'lotik's' posts I think he did it (may have been someone else though). good luck!

Blue Beard · 05-27-2003, 08:29 AM

Welcome from Washington State.

Keep us posted on the project. Pics of steps taken or any progress are always appreciated on the board.

griesel72 · 05-27-2003, 08:34 AM

Welcome from kansas

*Randy70C-10* · 05-27-2003, 10:52 AM

Rounded wheels wells! .....nice truck!

**BIG ORANGE** · 05-27-2003, 12:04 PM

Welcome from the palmetto state S.C. I have a 90 model bed with a ZR1 rollpan and the tailite caps,I would use squre tuben for the risers on the bed to get the height right!

6T9GMC · 05-27-2003, 12:39 PM

I GOT THE BED SITTIN ON THERE TEMPORARILY FOR NOW. I HAVE TO DO SOME MEASURING TONIGHT. HOPEFULLY GET IT DONE AND HAVE SOME PICS!

THANKS

**Palf70Step** · 05-27-2003, 01:09 PM

Welcome from another short step'r.

05-24-2003, 07:15 PM	#1
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	New Member HELLO, I'M CHRIS FROM MOORE, OK. I BOUGHT THIS TRUCK FROM MY FATHER-IN-LAW LAST YEAR AND I'M IN THE PROCESS OF PUTTING A 95 STEPSIDE BED ON IT....IF YOU KNOW TRICKS ABOUT MOUNTING THE NEWER BED PLEASE HELP!!!! HOPEFULLY HERE IS SOME PICS.... Attached Images

05-24-2003, 07:18 PM	#2
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	PIC2 PIC2 Attached Images

05-24-2003, 07:20 PM	#3
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	BED IS FOR SALE THIS BED HAS A LOUVERED TAILGATE SKIN AND TAILLIGHTS IN THE REAR OF THE FENDERS WOOD IS PRETTY MUCH GONE. MAKE ME AN OFFER IF INTERESTED! Attached Images

05-24-2003, 08:17 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,303	your truck has alot of potential goodl uck with it and welcome to the boards __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-25-2003, 12:57 AM	#7
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	HELLO.. THANKS I'VE NOTICED THE WHEEL WELLS.. I'M GONNA MAKE THEM BOTH THE SAME SHAPE, JUST DON'T KNOW IF ROUNDED OR SQUARE YET?

05-25-2003, 12:20 AM	#5
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	THANKS!!

05-25-2003, 12:36 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Welcome to the board from Ohio...lots of good info on here. One thing you may have not noticed with the late model beds, the wheel wells don't match, and the lower portion doesn't line up very well. It is known what I think of this swap, but don't let me or anyone else stop you if that's what you want. You could repair the tail lights and replace the tailgate cheaper than you may think. Anywyas, welcome to the board and don't be afraid to ask questions.

05-25-2003, 01:01 AM	#8
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	MY FATHER-IN-LAW ALWAYS WANTED TO PUT THE NEWER BED ON IT...TRYING TO DO SOME OF THE STUFF HE WANTED TO DO TO IT, FOR HIM. HE HASN'T BEEN ABLE TO DO MUCH TO IT, SO HE SOLD IT TO ME TO FIX UP!

05-25-2003, 01:03 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Sweet, good luck to you.

05-25-2003, 05:21 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Welcome from Southern Oregon and nice truck btw. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-27-2003, 12:18 AM	#11
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,058	Welcome from Edmond __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

05-27-2003, 12:23 AM	#12
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-27-2003, 02:32 AM	#13
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Welcome from W. Tennessee. Sounds like a good project. How much for the steps from your truck?

05-27-2003, 03:34 AM	#14
sixty8chev The Sauz Join Date: Mar 2002 Location: Chilliwack BC, Canada Posts: 149	Just my 2 cents, but go with the rounded wheelwells if you can, if ya want to see somethin with square all the way round I'm sure somebody can direct ya to the one with the tucked duallies, and you can draw your own conclusions __________________ 68 lwb 2wd (spread between 3 garages) 72 Burb - Flat Deck 92 Yukon 3" lift - 33's - the new bush pig 01 Sierra - Daily Driver (for now)

05-27-2003, 05:05 AM	#15
Seke69 Space Cadet Join Date: Mar 2003 Location: Twin Cities Posts: 132	welcome from Minnesota! I could use a bed, but I'm lookin' for a short fleetside... should look pretty cool with a late model bedside, do have one in mind? or have you bought one yet? look for 'lotik's' posts I think he did it (may have been someone else though). good luck!



Register or Log In To remove these advertisements.

05-27-2003, 08:29 AM	#16
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Welcome from Washington State. Keep us posted on the project. Pics of steps taken or any progress are always appreciated on the board. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

05-27-2003, 08:34 AM	#17
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Welcome from kansas __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-27-2003, 10:52 AM	#18
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Rounded wheels wells! .....nice truck!

05-27-2003, 12:04 PM	#19
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,754	Welcome from the palmetto state S.C. I have a 90 model bed with a ZR1 rollpan and the tailite caps,I would use squre tuben for the risers on the bed to get the height right! __________________ Things happen for a reason!

05-27-2003, 12:39 PM	#20
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	THANKS I GOT THE BED SITTIN ON THERE TEMPORARILY FOR NOW. I HAVE TO DO SOME MEASURING TONIGHT. HOPEFULLY GET IT DONE AND HAVE SOME PICS! THANKS

05-27-2003, 01:09 PM	#21
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Welcome from another short step'r. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.