NC WTB: top of 3 point belt mount

[oteixeira]

I know, it sounds horrible, I don't know what to call it. I am getting all the body work done on the cab, and realized I have 3 point belts, but the passengers side only has the hole on the inner B pillar, no threads (the drivers side is fine). Is there anyone that can go cut me out there good section with threads? I just need about 3 inches all around or so, and I will be fine. Just figured I would weld in the replacement.

Let me know,

Orlando

[Dasani]

I've got a cab that I'll be cutting up soon. I'm working Saturday; Sunday is as soon as I could get to this. If I get off early enough tomorrow I'll go by and look at this on the cab and cut it out for you.

Tom Jones
Havelock, NC


I

Originally Posted by oteixeira

I know, it sounds horrible, I don't know what to call it. I am getting all the body work done on the cab, and realized I have 3 point belts, but the passengers side only has the hole on the inner B pillar, no threads (the drivers side is fine). Is there anyone that can go cut me out there good section with threads? I just need about 3 inches all around or so, and I will be fine. Just figured I would weld in the replacement.

Let me know,

Orlando

[oteixeira]

Tom,

That sounds great, I still need to put in the new floor, rockers and corners, so this weekend is plenty early enough! How much would you want for it?

Orlando

[Dasani]

Orlando,

How does 25 bucks sound to you? I'm sure they are both the same so I'm going to use a hole saw to cut the driver's side out. If that doesn't look good to me I'll cut above and below the passenger's and send it to you that way. BTW, give me your address and I'll have my daughter mail this out to you Monday! You need anyother stuff? I'm two hours away from you and I have a lot of good used parts.

Tom

[oteixeira]

Tom,

Sounds good, PM me your paypal info if you would. I am actually close to the finish line over here, and don't need much else (in used parts).

Orlando

[Dasani]

Orlando,

I don't do paypal you can send me a check I'll pm you my address. I'll get this out tonight and in the mail to you next week (early) I'll cover shipping.

Tom

[Dasani]

I got this thing out, a hole saw wasn’t the tool to use! Wrapped in paper and in a padded envelope, I’ll have my daughter drop it off at the post office in the morning.

[Dasani]

It was mailed yesterday you should have it in a day or two. Let me know if you need anything else, I'm going to haul this thing to the crusher in a couple of weeks. ~Tom

[oteixeira]

Tom,

I really appreciate it. I am going to drop the check in the mail today or tomorrow, depending on how my twins set up my schedule!

Orlando

[Dasani]

Orlando,
Glad to help you out.
Tom

[70LonghornCST]

Kudos to Tom for helpling a brother out. Orlando, have fun with your truck.

[Dasani]

Anyone else need a "hunk" of cab before I cart it off?

Tom