Scott's Hotrods Bolt in IFS...coilover edition

[3r!c84]

is that lou from muscle car?

[Scottshotrods]

Originally Posted by LUCKIN-FOU

Thats what I'm talking about coil overs. I'm a big fan of the coil over. I'll get my truck over to you Justin.

Lou your ifs is ready for you
Justin

[STOCKISH]

OK Lou, we are going to need pics of said truck! Welcome to the board.

[AirMale]

wow! love the coilovers. Bolt in and no need to notch the frame? I want to see a customer review first then I'm in.

[nlped]

Originally Posted by nlped

That piece is beautiful! I would certainly be interested in the bags/shocks version if I could reuse my McGaughy drop spindle...as I already have their 13" big brake kit w/ spindle . Would that be feasible?

???

[jephs422]

Originally Posted by nlped

???

Sorry, we don't do any kits with that spindle/brake set-up. All of our kits are based on in-house specs, and when we attempt to use those spindles, ball/joints combo's, the retro fit just doesn't work out effectively. Don't get me wrong, it can be done, what you will spend in the cost for the "custom" application, will already have more than paid for a new set of brakes.

[jephs422]

Originally Posted by AirMale

wow! love the coilovers. Bolt in and no need to notch the frame? I want to see a customer review first then I'm in.

Hey that's an easy one. You buy the first one....then give us an awesome review. After you read the review buy another one...and you'll feel good knowing that you waited till you heard a good review. Sound like a plan? LOL!!

[Scottshotrods]

If anybody has any questions about our new bolt in ifs please ask.
Justin

[LUCKIN-FOU]

That front end is nice. I'm not saying that because I'm Justins' ONLY FRIEND the truth is the workmanship is good.

[andrewmp6]

What spindles are they mustang 2 ?

[Scottshotrods]

Originally Posted by andrewmp6

What spindles are they mustang 2 ?

We are using the mustang 2 spindals.We use these spindals for one reason
we have several different brake kits that can be used with the spindals.
The spindal is a forged spindal as well.
Justin

[nlped]

I'm still interested as I have 2 squares . What larger brake options will be offered? And what kind of money?

Also, how much additional ground clearance does this piece offer over stock? I'm sure it's pretty substantial, but was wondering about a solid #.

[Scottshotrods]

Originally Posted by nlped

I'm still interested as I have 2 squares . What larger brake options will be offered? And what kind of money?

Also, how much additional ground clearance does this piece offer over stock? I'm sure it's pretty substantial, but was wondering about a solid #.

There is 4 more inches of ground clearence over stock crossmember.
The base price for the frontend and this is complete 100%
$2895.00
brakes are a 11 inch rotor gm caliper bolt pattern is 5on4 3/4 or 5on4 1/2 bolt pattern this comes with the frontend priced above.

For brake options if you want differnt bolt patterns
5on5 the price will $3095.00
5on5 1/2 same price
6 lung $3395.00

For wilwood brakes upgardes
11 drilled and slotted 4 piston caliper $675.00
12 inch drilled andslotted 4 piston caliper $750.00
13 inch drilled and slotted 6 piston caliper $1700.00
14 inch drilled and slotted 6 piston caliper $1900.00
Have any qustions please ask.
Thankyou,
Justin

[draggin86]

Will the air suspension crossmember lay the truck out completely like the other that are offered?

[Scottshotrods]

Originally Posted by draggin86

Will the air suspension crossmember lay the truck out completely like the other that are offered?

Our Scotts Superslam ifs bolt-on will lay out no problem at all.
You can run a 29 1/2 tall front tire and lay frame and our ifs is
getting 10 1/2 inches of travel.
Justin

[moneyeater]

That setup looks awesome and grounclearence is what we need!
Id love to bolt one in and carve through the streets and the autobahn!!
Unfortunatly we have the TÜV in germany wich spoils every fun in that way!
It was a pain in the back to get the lowered spindles through inspection "as" originals!

Do you make a matching rear setup that makes a corvette from the truck?
How about international shipping?
Awesome stuff!
Volker

[Scottshotrods]

Originally Posted by moneyeater

That setup looks awesome and grounclearence is what we need!
Id love to bolt one in and carve through the streets and the autobahn!!
Unfortunatly we have the TÜV in germany wich spoils every fun in that way!
It was a pain in the back to get the lowered spindles through inspection "as" originals!

Do you make a matching rear setup that makes a corvette from the truck?
How about international shipping?
Awesome stuff!
Volker

On the front instead of getting it with dropped spindals you can have it with
stock spindals.For the back of the truck we do have one we are working on.
We are not done with it yet but it is coming along.
Justin

[AirMale]

Looks nice on the display stand but....... must be some pics installed on your mock up vehicle laying around

[jephs422]

Here it is on the mock up chassis...







Here you can see the inner plate that "boxes" the frame

[Scottshotrods]

Looks good!!!!!!!!!

[STOCKISH]

The 73-87 engine mounts are different than the 67-72 pictured. How do they fit with that pillar to bolt them to?

[Scottshotrods]

Originally Posted by 1972SuperCheyenne

The 73-87 engine mounts are different than the 67-72 pictured. How do they fit with that pillar to bolt them to?

We have our own motor mounts that come with our bolt-in ifs.They
come welded in place already to eliminate any issues.
Justin
www.scottshotrods.com

[duceducenine]

does the bolt on ifs narrow the track?
how much shorter? options?