NC Horn Button CST Chevy/GMC and standard - The 1947 - Present Chevrolet & GMC Truck Message Board Network

easyrider · 07-03-2010, 04:32 PM

REDUCED PRICE TO $75.00
For Sale are 3 horn buttons for a 1967/68 Chevy/ GMC Truck. One is the standard horn button that came out on the everyday truck. It has a rubber ring that mounts it. The other is a GMC/CST that I tried to put a rubber ring on when the teeth broke off, it didn't work. The other is the rare and almost impossible to get CST/Chevy with all the teeth and no damage. I found that you can change the back from the Chevy CST to the GMC CST front. Giving you the opportunity to use this correctly on either the Chevy or the GMC. I sold my Chevy CST Truck last week and had this one as a back up, when I found out how impossible it was to find. I found one in Oregon with 2 teeth broken and he wanted $50, with bad chrome on front. I looked on all of the web site and Craig's List all over the country and couldn't find one. I ran upon one at the Charlotte Antique Auto Show 2 years ago and paid this much for the one good one (CHEVY) alone. If you have a 67 or 68 Chevy Truck this is a really nice piece that is in your face everyday when you are behind the wheel and it really adds some class to your truck. It doesn't have to be a CST to use, it will fit on your stock steering wheel. I can tell you from my own experiences that you won't find one by chance anywhere. Thanks for looking!

**too much stuff** · 07-03-2010, 04:45 PM

So, how much?

easyrider · 07-03-2010, 05:11 PM

Price didn't post for some reason. I'll take $75 for all three.

**67cheby** · 07-05-2010, 10:34 AM

i would be interested in just the nice chevrolet one if you are interested in seperating or the gmc one all i really need is a really nice chrome trim ring my center piece is good

easyrider · 07-05-2010, 12:49 PM

You can take the chrome ring from the GMC and use your center, if your back plastic teeth aren't broken. Actually, I am really selling the Chevy one and adding the rest. That way a Chevy man or a GMC man could use the back plastic teeth part and change name plates if necessary. I will sell the GMC one with good chrome for $10 and you can change it out.
My only problem is that I paid $75 for the Chevy one because of the perfect plastic with all the teeth. Hope that will work for you.

**67cheby** · 07-05-2010, 12:53 PM

so the chrome is really nice on the gmc one ?? that would work if it is , i dont need the center just the trim ring, if thats the case i will take it , And THANK YOU its going to a good home

07-03-2010, 04:32 PM	#1
easyrider Registered User Join Date: Jan 2009 Location: Stanley, N.C. Posts: 161	Horn Button CST Chevy/GMC and standard $125 for all 3 REDUCED PRICE TO $75.00 For Sale are 3 horn buttons for a 1967/68 Chevy/ GMC Truck. One is the standard horn button that came out on the everyday truck. It has a rubber ring that mounts it. The other is a GMC/CST that I tried to put a rubber ring on when the teeth broke off, it didn't work. The other is the rare and almost impossible to get CST/Chevy with all the teeth and no damage. I found that you can change the back from the Chevy CST to the GMC CST front. Giving you the opportunity to use this correctly on either the Chevy or the GMC. I sold my Chevy CST Truck last week and had this one as a back up, when I found out how impossible it was to find. I found one in Oregon with 2 teeth broken and he wanted $50, with bad chrome on front. I looked on all of the web site and Craig's List all over the country and couldn't find one. I ran upon one at the Charlotte Antique Auto Show 2 years ago and paid this much for the one good one (CHEVY) alone. If you have a 67 or 68 Chevy Truck this is a really nice piece that is in your face everyday when you are behind the wheel and it really adds some class to your truck. It doesn't have to be a CST to use, it will fit on your stock steering wheel. I can tell you from my own experiences that you won't find one by chance anywhere. Thanks for looking! Attached Images Last edited by easyrider; 07-05-2010 at 09:54 AM.

07-03-2010, 04:45 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: Horn Button CST Chevy/GMC and standard So, how much? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-03-2010, 05:11 PM	#3
easyrider Registered User Join Date: Jan 2009 Location: Stanley, N.C. Posts: 161	Re: Horn Button CST Chevy/GMC and standard Price didn't post for some reason. I'll take $75 for all three. Last edited by easyrider; 07-05-2010 at 09:55 AM.

07-05-2010, 10:34 AM	#4
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Horn Button CST Chevy/GMC and standard i would be interested in just the nice chevrolet one if you are interested in seperating or the gmc one all i really need is a really nice chrome trim ring my center piece is good __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-05-2010, 12:49 PM	#5
easyrider Registered User Join Date: Jan 2009 Location: Stanley, N.C. Posts: 161	Re: Horn Button CST Chevy/GMC and standard You can take the chrome ring from the GMC and use your center, if your back plastic teeth aren't broken. Actually, I am really selling the Chevy one and adding the rest. That way a Chevy man or a GMC man could use the back plastic teeth part and change name plates if necessary. I will sell the GMC one with good chrome for $10 and you can change it out. My only problem is that I paid $75 for the Chevy one because of the perfect plastic with all the teeth. Hope that will work for you.

07-05-2010, 12:53 PM	#6
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Horn Button CST Chevy/GMC and standard so the chrome is really nice on the gmc one ?? that would work if it is , i dont need the center just the trim ring, if thats the case i will take it , And THANK YOU its going to a good home __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.