NY WTB - Horn button/Trim Ring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

masse1 · 07-12-2010, 08:49 AM

Hi,

Looking for the horn button "guts" on the factory steering wheel for my 1972 C/10.

Also need a trim ring for the 15 inch rally wheel.

Anyone have this stuff lying around??

Thanks!

**Ironhorse** · 07-12-2010, 07:05 PM

I may be able to help, I have some spare wheel/horn parts in the parts shed. Not sure just how much you are needing. I think I can supply the plastic ring, cup and spring plate, not sure about the three screws that mount it all. Have to look in the shed. Do you have a pic of what you are needing?

masse1 · 07-12-2010, 07:29 PM

Here's a picture - this setup is for an aftermarket wheel, and will not work with the stock wheel I am putting on the truck.

Thanks!

**michael bustamante** · 07-12-2010, 07:33 PM

except for the white ring on top of the pic, I have all the same parts from when I replaced my factory steer wheel.

**Ironhorse** · 07-12-2010, 09:38 PM

I can provide the three main parts also except for the white plastic ring at the top of the pic. Even found the three screws for the mounting. These came from several Chev/GMC vehicles I've played with and parted over the years. Let me know if this is what you are looking for.

masse1 · 07-14-2010, 09:15 PM

Here is a picture of the trim ring I am looking for....

07-12-2010, 08:49 AM	#1
masse1 Registered User Join Date: Oct 2004 Location: Lockport, NY Posts: 37	WTB - Horn button/Trim Ring Hi, Looking for the horn button "guts" on the factory steering wheel for my 1972 C/10. Also need a trim ring for the 15 inch rally wheel. Anyone have this stuff lying around?? Thanks! __________________ 1972 Chevrolet C/10 350 Automatic, A/C, Tilt.

07-12-2010, 07:05 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB - Horn button/Trim Ring I may be able to help, I have some spare wheel/horn parts in the parts shed. Not sure just how much you are needing. I think I can supply the plastic ring, cup and spring plate, not sure about the three screws that mount it all. Have to look in the shed. Do you have a pic of what you are needing? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-12-2010, 07:29 PM	#3
masse1 Registered User Join Date: Oct 2004 Location: Lockport, NY Posts: 37	Re: WTB - Horn button/Trim Ring Here's a picture - this setup is for an aftermarket wheel, and will not work with the stock wheel I am putting on the truck. Thanks! Attached Images __________________ 1972 Chevrolet C/10 350 Automatic, A/C, Tilt.

07-12-2010, 07:33 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: WTB - Horn button/Trim Ring except for the white ring on top of the pic, I have all the same parts from when I replaced my factory steer wheel. __________________ 1967custom

07-12-2010, 09:38 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB - Horn button/Trim Ring I can provide the three main parts also except for the white plastic ring at the top of the pic. Even found the three screws for the mounting. These came from several Chev/GMC vehicles I've played with and parted over the years. Let me know if this is what you are looking for. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-14-2010, 09:15 PM	#6
masse1 Registered User Join Date: Oct 2004 Location: Lockport, NY Posts: 37	Re: WTB - Horn button/Trim Ring Here is a picture of the trim ring I am looking for.... Attached Images __________________ 1972 Chevrolet C/10 350 Automatic, A/C, Tilt.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.