|
07-26-2010, 09:30 AM
|
#1 |
|
Registered User
 
Join Date: Feb 2009
Location: Savannah GA
Posts: 505
|
Sheetmetal gauges??
Well, I finally bit the bullet and started stripping down my 71 for the restoration and LSX swap. The cab was my biggest concern... as I was unsure of how much rust was there. To my surprise it wasn't as bad as I thought. Rockers of course, cab corners, and a little floor board.
My question is this... Is there a list of the sheetmetal gauge for production parts? For example... i know that some of the replacement patch panels are thinner gauge material than the original. I don't want to repair my floor pans with thinner gauge sheetmetal. Can anyone give me details on this? Who do you guys recommend getting patch panels from? Thanks |
|
|
|
07-26-2010, 01:44 PM
|
#2 |
|
Registered User
Join Date: Apr 2010
Location: Mobile, AL
Posts: 365
|
Re: Sheetmetal gauges??
LMC has pretty much anything you will need.
lmctrucks.com
__________________
----------------------------------------- My 67 c10 Thread. http://67-72chevytrucks.com/vboard/s...d.php?t=409192 |
|
|
|
|
07-26-2010, 02:53 PM
|
#3 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,642
|
Re: Sheetmetal gauges??
Check with Wes at www.classicheartbeat.com He is a site vendor here and I have seen and checked out the metal he sells and it is first rate. Plus he uses the same pieces in his shop to fix the trucks he works on. I need to get a set of rocker panels from him this fall as mine are getting that "see through" look to them.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
